Smart grid represents an advanced and interconnected system that incorporates modern technologies to enhance efficiency, reliability and sustainability. In comparison to the conventional grid, the smart grid (SG) uses many cutting-edge technologies. This research introduces a fog computing encryption-based model for privacy preservation in the smart grid model. By using different advanced technologies, our model addresses the balance between privacy, security, effectiveness and functionality. The model facilitates efficient communication and function inquiry while mitigating challenges posed by massive Internet of Things (IoT) systems in the smart grid environment. Specifically, it tackles the secure data consolidation challenge by employing encryption-based techniques for transmitting private data from smart meters to fog devices. These devices consolidate the data before updating to cloud. Conventional data consolidation approaches for SGs have high computation and communication costs and suffer from high storage requirement. The proposed model resolves these issues; algorithms for data consolidation and extraction of data at fog device and cloud respectively to obtain the secure communication has also been included. The performance of the developed mechanism has been computed against existing data consolidation mechanisms GCEDA (Grouping of Clusters for Efficient Data Aggregation), SPPDA (Secure Privacy-Preserving Data Aggregation) and LPDA (Lightweight Privacy-preserving Data Aggregation) for numerous performance parameters. And the results proves that the performance of developed mechanism with respect to bytes of storage, communication cost and ratio of transmission is better than the existing ones.
smart gridInternet of Thingsfog computingdata encryption
The Internet of Things (IoT) is an emerging technology that allow smart devices to communicate through various heterogeneous channels (wired or wireless). However, for conventional networks, it has become a challenging task to efficiently control and manage the data flows of a huge number of devices. Software-defined networking (SDN) is a new way of thinking about networking. Because it is programmable, flexible, agile, and gives you a big picture of the network, it has tried to solve some IoT problems, like scalability, heterogeneity, and complexity. In large-scale SDN-IoT networks, there is a requirement for routing protocols that are both efficient and secure in order to ensure a superior level of quality of service (QoS) and quality of experience (QoE). To address the above stated challenges, a novel deep reinforcement learning (DRL) known as DQQS model is proposed. The aim is to achieve QoS and QoE while also ensuring the security of the SDN-IoT network. The proposed DQQS model dynamically extracts patterns from the past network history by interacting with the underlying network and generating optimized routing policies. This article employs three network metrics—throughput, latency, and the probability of avoiding malicious nodes—to measure the performance of DQQS. Simulations reveal that the proposed framework outperforms four state-of-the-art routing algorithms: OSPF, L-L Routing, Sailfish Routing, and RL-Routing in terms of both throughput and latency. For instance, in an attacked environment, the proposed DQQS model achieved the highest throughput value of 14.5 Mbps, surpassing OSPF at 8 Mbps, L-L at 8.2 Mbps, Sailfish at 9 Mbps, and RL at 9.5 Mbps. Similarly, this model exhibited superior performance in latency, recording the lowest latency value of 52 ms, compared to OSPF 88 ms, L-L 85 ms, Sailfish 72 ms, and RL 75 ms routing algorithms. The experimental results demonstrate that this new DQQS model is a pioneering deep reinforcement learning-based technique that optimally addresses secure routing in the SDN-IoT environment, ensuring enhanced quality of service and experience, and outperforming state-of-the art DL methodologies in both security and network performance metrics.
software-defined networkingInternet of Thingssecure routingdeep reinforcement learning
Fraudulent activities especially in auto insurance and credit card transactions impose significant financial losses on businesses and individuals. To overcome this issue, we propose a novel approach for fraud detection, combining convolutional neural networks (CNNs) with support vector machine (SVM), k nearest neighbor (KNN), naive Bayes (NB), and decision tree (DT) algorithms. The core of this methodology lies in utilizing the deep features extracted from the CNNs as inputs to various machine learning models, thus significantly contributing to the enhancement of fraud detection accuracy and efficiency. Our results demonstrate superior performance compared to previous studies, highlighting our model's potential for widespread adoption in combating fraudulent activities.
The Levenberg–Marquardt (LM) backpropagation optimization algorithm, an artificial neural network algorithm, is used in this study to perform integrated numerical computing to evaluate the electromagnetohydrodynamic bioconvection flow of micropolar nanofluid with thermal radiation and stratification. The model is then reduced to a collection of boundary value problems, which are solved with the help of a numerical technique and the proposed scheme, i.e., the LM algorithm, which is an iterative approach to determine the minimum of a nonlinear function defined as the sum of squares. As a blend of the steepest descent and the Gauss–Newton method, it has become a typical approach for nonlinear least-squares problems. Furthermore, the stability and consistency of the algorithm are ensured. For validation purposes, the results are also compared with those of previous research and the MATLAB bvp4c solver. Neural networking is also utilized for velocity, temperature, and concentration profile mapping from input to output. These findings demonstrate the accuracy of forecasts and optimizations produced by artificial neural networks. The performance of the bvp4c solver, which is used to reduce the mean square error, is used to generalize a dataset. The artificial neural network-based LM backpropagation optimization algorithm operates using data based on the ratio of testing (13%), validation (17%), and training (70%). This stochastic computing work presents an activation log-sigmoid function based LM backpropagation optimization algorithm, in which tens of neurons and hidden and output layers are used for solving the learning language model. The overlapping of the results and the small computed absolute errors, which range from 10−3 to 10−10 and from 106 to 108 for each model class, indicate the accuracy of the artificial neural network-based LM backpropagation optimization algorithm. Furthermore, each model case’s regression performance is evaluated as if it were an ideal model. In addition, function fitness and histogram are used to validate the dependability of the algorithm. Numerical approaches and artificial neural networks are an excellent combination for fluid dynamics, and this could lead to new advancements in many domains. The findings of this research could contribute to the optimization of fluid systems, resulting in increased efficiency and production across various technical domains.
Phishing, an Internet fraud where individuals are deceived into revealing critical personal and account information, poses a significant risk to both consumers and web-based institutions. Data indicates a persistent rise in phishing attacks. Moreover, these fraudulent schemes are progressively becoming more intricate, thereby rendering them more challenging to identify. Hence, it is imperative to utilize sophisticated algorithms to address this issue. Machine learning is a highly effective approach for identifying and uncovering these harmful behaviors. Machine learning (ML) approaches can identify common characteristics in most phishing assaults. In this paper, we propose an ensemble approach and compare it with six machine learning techniques to determine the type of website and whether it is normal or not based on two phishing datasets. After that, we used the normalization technique on the dataset to transform the range of all the features into the same range. The findings of this paper for all algorithms are as follows in the first dataset based on accuracy, precision, recall, and F1-score, respectively: Decision Tree (DT) (0.964, 0.961, 0.976, 0.968), Random Forest (RF) (0.970, 0.964, 0.984, 0.974), Gradient Boosting (GB) (0.960, 0.959, 0.971, 0.965), XGBoost (XGB) (0.973, 0.976, 0.976, 0.976), AdaBoost (0.934, 0.934, 0.950, 0.942), Multi Layer Perceptron (MLP) (0.970, 0.971, 0.976, 0.974) and Voting (0.978, 0.975, 0.987, 0.981). So, the Voting classifier gave the best results. While in the second dataset, all the algorithms gave the same results in four evaluation metrics, which indicates that each of them can effectively accomplish the prediction process. Also, this approach outperformed the previous work in detecting phishing websites with high accuracy, a lower false negative rate, a shorter prediction time, and a lower false positive rate.
Frontiers in Computational Neuroscience · مجلد 18 · 1391025-1391025
According to experts in neurology, brain tumours pose a serious risk to human health. The clinical identification and treatment of brain tumours rely heavily on accurate segmentation. The varied sizes, forms, and locations of brain tumours make accurate automated segmentation a formidable obstacle in the field of neuroscience. U-Net, with its computational intelligence and concise design, has lately been the go-to model for fixing medical picture segmentation issues. Problems with restricted local receptive fields, lost spatial information, and inadequate contextual information are still plaguing artificial intelligence. A convolutional neural network (CNN) and a Mel-spectrogram are the basis of this cough recognition technique. First, we combine the voice in a variety of intricate settings and improve the audio data. After that, we preprocess the data to make sure its length is consistent and create a Mel-spectrogram out of it. A novel model for brain tumor segmentation (BTS), Intelligence Cascade U-Net (ICU-Net), is proposed to address these issues. It is built on dynamic convolution and uses a non-local attention mechanism. In order to reconstruct more detailed spatial information on brain tumours, the principal design is a two-stage cascade of 3DU-Net. The paper's objective is to identify the best learnable parameters that will maximize the likelihood of the data. After the network's ability to gather long-distance dependencies for AI, Expectation-Maximization is applied to the cascade network's lateral connections, enabling it to leverage contextual data more effectively. Lastly, to enhance the network's ability to capture local characteristics, dynamic convolutions with local adaptive capabilities are used in place of the cascade network's standard convolutions. We compared our results to those of other typical methods and ran extensive testing utilising the publicly available BraTS 2019/2020 datasets. The suggested method performs well on tasks involving BTS, according to the experimental data. The Dice scores for tumor core (TC), complete tumor, and enhanced tumor segmentation BraTS 2019/2020 validation sets are 0.897/0.903, 0.826/0.828, and 0.781/0.786, respectively, indicating high performance in BTS.
The Internet of Things (IoT) is essential in several Internet application areas and remains a key technology for communication technologies. Shorter delays in transmission between Roadside Units (RSUs) and vehicles, road safety, and smooth traffic flow are the major difficulties of Intelligent Transportation System (ITS). Machine Learning (ML) was an advanced technique to find hidden insights into ITSs. This article introduces an Improved Arithmetic Optimization with Deep Learning Driven Traffic Congestion Control (IAOADL-TCC) for ITS in Smart Cities. The presented IAOADL-TCC model enables traffic data collection and route traffic on existing routes for avoiding traffic congestion in smart cities. The IAOADL-TCC algorithm exploits a hybrid convolution neural network attention long short-term memory (HCNN-ALSTM) method for traffic congestion control. In addition, an IAOA-based hyperparameter tuning strategy is derived to optimally modify the parameters of the HCNN-ALSTM model. The presented IAOADL-TCC model effectively enhances the flow of traffic and reduces congestion. The experimental validation was performed using the road traffic dataset from the Kaggle repository. The proposed model obtained an average accuracy of 98.03 % with an error rate of 1.97 %. The experimental analysis stated the superior performance of the IAOADL-TCC approach over other DL methods.
traffic congestion controlInternet of Thingsintelligent transportation systemsarithmetic optimization
In the realm of medical imaging, the early detection of kidney issues, particularly renal cell hydronephrosis, holds immense importance. Traditionally, the identification of such conditions within ultrasound images has relied on manual analysis, a labor-intensive and error-prone process. However, in recent years, the emergence of deep learning-based algorithms has paved the way for automation in this domain. This study aims to harness the power of deep learning models to autonomously detect renal cell hydronephrosis in ultrasound images taken in close proximity to the kidneys. State-of-the-art architectures, including VGG16, ResNet50, InceptionV3, and the innovative Novel DCNN, were put to the test and subjected to rigorous comparisons. The performance of each model was meticulously evaluated, employing metrics such as F1 score, accuracy, precision, and recall. The results paint a compelling picture. The Novel DCNN model outshines its peers, boasting an impressive accuracy rate of 99.8%. In the same arena, InceptionV3 achieved a notable 90% accuracy, ResNet50 secured 89%, and VGG16 reached 85%. These outcomes underscore the Novel DCNN's prowess in the realm of renal cell hydronephrosis detection within ultrasound images. Moreover, this study offers a detailed view of each model's performance through confusion matrices, shedding light on their abilities to categorize true positives, true negatives, false positives, and false negatives. In this regard, the Novel DCNN model exhibits remarkable proficiency, minimizing both false positives and false negatives. In conclusion, this research underscores the Novel DCNN model's supremacy in automating the detection of renal cell hydronephrosis in ultrasound images. With its exceptional accuracy and minimal error rates, this model stands as a promising tool for healthcare professionals, facilitating early-stage diagnosis and treatment. Furthermore, the model's convergence rate and accuracy hold potential for enhancement through further exploration, including testing on larger and more diverse datasets and investigating diverse optimization strategies.
Internet of Things (IoT) sensor networks are connected systems of physical devices set with actuators, sensors, and communication abilities, allowing them to gather, spread, and exchange information with centralized methods. These networks are essential in numerous businesses, such as healthcare, manufacturing, agriculture, and smart cities, as they deliver real-time observation, data-driven insights, and automation. Threat recognition in IoT sensor networks is a vital feature of safeguarding the protection and consistency of interconnected systems in the IoT. As IoT sensor networks endure to increase across various industries, the vulnerability to malicious actions and cyber-attacks increases. Threat recognition utilizing deep learning (DL) leverages neural networks to examine complex patterns and anomalies in data, permitting the identification of potential safety threats. DL techniques like convolutional neural networks (CNNs) or recurrent neural networks (RNNs) excel at learning complex representations of data and feature extraction, making them suitable for identifying sophisticated attacks in different fields, including cybersecurity. This research develops a Hybrid Sine-Cosine Chimp Optimization Feature Selection with a Deep Learning (HSCCOFS-DL) approach for Threat Recognition in IoT Sensor Networks. The foremost aim of the HSCCOFS-DL system lies in the automated detection of threats using DL models. To accomplish this, the HSCCOFS-DL approach undergoes a data normalization process. Besides, the selection of features can be performed using the HSCCO algorithm. Meanwhile, the symmetrical autoencoder (SAE) technique effectively classifies threats. Finally, the sparrow search algorithm (SSA) can be applied to the selection of the hyperparameter of the SAE system. The experimental assessment of the HSCCOFS-DL technique takes place on a benchmark dataset. The simulation results indicated that the HSCCOFS-DL approach attains enhanced performance over other methods.
Vaccine acceptance is a crucial component of a viable immunization program in healthcare system, yet the disparities in new and existing vaccination adoption rates prevail across regions. Disparities in the rate of vaccine acceptance result in low immunization coverage and slow uptake of newly introduced vaccines. This research presents an innovative AI-driven predictive model, designed to accurately forecast vaccine acceptance within immunization programs, while providing high interpretability. Primarily, the contribution of this study is to classify vaccine acceptability into Low, Medium, Partial High, and High categories. Secondly, this study implements the Feature Importance method to make the model highly interpretable for healthcare providers. Thirdly, our findings highlight the impact of demographic and socio-demographic factors on vaccine acceptance, providing valuable insights for policymakers to improve immunization rates. A sample dataset containing 7150 data records with 31 demographic and socioeconomic attributes from PDHS (2017-2018) is used in this paper. Using the LightGBM algorithm, the proposed model constructed on the basis of different machine-learning procedures achieved 98% accuracy to accurately predict the acceptability of vaccines included in the immunization program. The association rules suggest that higher SES, region, parents' occupation, and mother's education have an association with vaccine acceptability.
Osteosarcoma is the most normal kind of cancer that arises in bones, which appears on the surface to resemble earlier types of bone cells that assist in forging new bone tissues, but the tissue in osteosarcoma is weaker and softer than normal bone tissue. The usage of automated techniques for the detection of osteosarcoma has the potential to mitigate the obligations and burdens confronted by pathologists owing to its abundant quantity of cases. Artificial intelligence (AI) has an emerging progress in diagnostic pathology. In recent years, numerous studies using deep learning (DL) techniques to histopathological images (HI) have been published. While several studies claim higher accuracy, they might lack generalization and fall into the pitfall of overfitting owing to the wide range of HI. The study objective is to enhance the diagnosis and detection of osteosarcoma by employing computer-assisted detection (CAD) and diagnoses (CADx). Technique like convolutional neural networks (CNN) make better prognoses for patient conditions and considerably reduce the surgeon’s workload. CNN needs to be trained on the massive quantity of data to accomplish a remarkable performance. Therefore, the study presents a novel Group Teaching Optimization Algorithm with Deep Learning-Driven Osteosarcoma Detection on Histopathological Images (GTOADL-ODHI) technique. The purpose of the GTOADL-ODHI technique is to examine the HIs for the detection and classification of osteosarcoma. To accomplish this, the GTOADL-ODHI algorithm applies the Gaussian filtering (GF) method for image pre-processed to become rid of the noise. Besides, the capsule network (CapsNet) model is utilized for the extractor of the feature vector. Furthermore, the hyperparameter selection of the CapsNet approach takes place using the GTOA. Finally, the self-attention bidirectional long short-term memory (SA-BiLSTM) model can be employed for osteosarcoma recognition and classification. The widespread experimental analysis of the GTOADL-ODHI method is tested on the benchmark datasets. The simulation validation reported the optimum solution of the GTOADL-ODHI algorithm related to existing systems concerning distinct aspects.
Case Studies in Thermal Engineering · مجلد 63 · 105267-105267
The proposed system uses a dual-loop organic Rankine cycle, a reverse osmosis desalination unit, an absorption cooling unit, and a thermoelectric generator to produce electricity and freshwater for urban areas. A thorough assessment of the system's thermodynamic and economic performance has been conducted, with a parameter-based investigation to assess the effect of key variables on the system performance. The parametric study indicates that rising the geothermal mass flow rate enhances the energy efficiency, but lowers the energy efficiency and affects the cooling requirements. Moreover, the optimum inlet temperature in turbine 1 increases the desalination efficiency up to 105.02 kg/s at 115 °C, and higher temperatures reduce the performance and system efficiency. Adjusting the temperature difference at the pinch point at Evaporator1 is crucial for system efficiency, with trade-offs between freshwater output, expenses, and exergy efficiency. The capability of the system to produce up to 6,048,000 L of potable water daily signifies a monumental leap towards meeting the water demands of nearly 42,000 individuals, based on European consumption standards. Lastly, the application of genetic algorithms in the optimization process results in an exergetic efficiency of 32.79 % and a cost rate of 58.05 $/h, demonstrating the system's enhanced operational effectiveness.
Journal of Health Organization and Management · مجلد 40 (6) · 1065-1082
PURPOSE: This study aims to assess AI literacy and attitudes among medical students and explore their implications for integrating AI into healthcare practice. DESIGN/METHODOLOGY/APPROACH: A quantitative research design was employed to comprehensively evaluate AI literacy and attitudes among 374 Lusaka Apex Medical University medical students. Data were collected from April 3, 2024, to April 30, 2024, using a closed-ended questionnaire. The questionnaire covered various aspects of AI literacy, perceived benefits of AI in healthcare, strategies for staying informed about AI, relevant AI applications for future practice, concerns related to AI algorithm training and AI-based chatbots in healthcare. FINDINGS: The study revealed varying levels of AI literacy among medical students with a basic understanding of AI principles. Perceptions regarding AI's role in healthcare varied, with recognition of key benefits such as improved diagnosis accuracy and enhanced treatment planning. Students relied predominantly on online resources to stay informed about AI. Concerns included bias reinforcement, data privacy and over-reliance on technology. ORIGINALITY/VALUE: This study contributes original insights into medical students' AI literacy and attitudes, highlighting the need for targeted educational interventions and ethical considerations in AI integration within medical education and practice.
AI literacymedical studentsattitudes toward AIartificial intelligence in healthcare
Abstract Cognitive radio networks have emerged as a promising solution to the growing problem of spectrum scarcity and inefficient spectrum utilization. By enabling secondary users to opportunistically access underutilized frequency bands while avoiding harmful interference to primary users, cognitive radio networks offer the potential for more efficient and dynamic spectrum allocation. In this paper, we propose an intelligent approach to dynamic spectrum access using fuzzy logic in cognitive radio networks. The key challenge in cognitive radio networks lies in spectrum sensing, decision-making, and channel selection, where uncertainties and variations in the radio frequency spectrum are prevalent. To address these challenges, we employ fuzzy logic as a powerful tool to handle the inherent imprecision and ambiguity in the decision-making process. Fuzzy-based spectrum sensing algorithms allow for robust detection of spectrum opportunities by considering the “fuzziness” in the received signal strength and noise conditions.
cognitive radio networksdynamic spectrum accessfuzzy logicspectrum sensing