جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

9 مُخرَج نتائج البحث عن «genetic algorithm»

مقالوصول مفتوح20258استشهاد· Semantic Scholar

Heat recovery unit integrated with biomass gasification for producing hydrogen/power/heat using a novel cascaded ORC with biphenyl/diphenyl oxide mixture; ML optimization and economic evaluation

Case Studies in Thermal Engineering · مجلد 76 · 107397-107397

This work provides a detailed evaluation of a novel biomass-fueled multigeneration system, conceived to contribute to the growing emphasis on sustainable energy solutions. The architecture comprises a biomass gasifier, an innovative cascaded organic Rankine cycle (CORC) incorporating a high-temperature mixture in the top cycle, a proton exchange membrane electrolyzer (PEME), a Brayton cycle, and waste heat utilization units, all operating together to deliver electricity, hydrogen (H 2 ), and thermal output. A comprehensive thermodynamic modeling framework is established to evaluate the system’s performance across various operational scenarios. The framework emphasizes critical metrics, including exergy efficiency, levelized total emissions (LTE), and payback period (PP). These indicators ensure a holistic assessment of energy, exergy, economic, and environmental considerations. Parametric studies demonstrate that enhancements in biomass mass flow rate and combustion chamber temperature significantly increase power output and H 2 production while reducing the payback period, underscoring the system’s flexibility and economic feasibility. Furthermore, the study employs sophisticated machine learning optimization methods, combining artificial neural networks (ANNs) with genetic algorithms (GA), to determine optimal operating conditions with minimal computational effort and maximum efficiency. When evaluated at nominal parameters, the system records an exergy efficiency of 23.72%, achieves a PP of 5.61 years, and yields an LTE value of 0.34 ton/GJ. However, under optimized conditions, these values improve to 35.01%, 3.78 years, and 0.241 ton/GJ, respectively.

biomass gasificationhydrogen productionpolygenerationproton exchange membrane electrolyzer
مقالوصول مفتوح202415استشهاد· Semantic Scholar

A geothermal-based freshwater/cooling system assisted by heat recovery sections: 3E analysis and techno-economic optimization using genetic algorithm

Case Studies in Thermal Engineering · مجلد 63 · 105267-105267

The proposed system uses a dual-loop organic Rankine cycle, a reverse osmosis desalination unit, an absorption cooling unit, and a thermoelectric generator to produce electricity and freshwater for urban areas. A thorough assessment of the system's thermodynamic and economic performance has been conducted, with a parameter-based investigation to assess the effect of key variables on the system performance. The parametric study indicates that rising the geothermal mass flow rate enhances the energy efficiency, but lowers the energy efficiency and affects the cooling requirements. Moreover, the optimum inlet temperature in turbine 1 increases the desalination efficiency up to 105.02 kg/s at 115 °C, and higher temperatures reduce the performance and system efficiency. Adjusting the temperature difference at the pinch point at Evaporator1 is crucial for system efficiency, with trade-offs between freshwater output, expenses, and exergy efficiency. The capability of the system to produce up to 6,048,000 L of potable water daily signifies a monumental leap towards meeting the water demands of nearly 42,000 individuals, based on European consumption standards. Lastly, the application of genetic algorithms in the optimization process results in an exergetic efficiency of 32.79 % and a cost rate of 58.05 $/h, demonstrating the system's enhanced operational effectiveness.

geothermal energyreverse osmosis desalinationabsorption coolingthermoelectric generators
ورقة مؤتمرمفتوح (مستودع)20244استشهاد· Semantic Scholar

Genetic and Deep Reinforcement Learning-Based Intelligent Course Scheduling for Smart Education

International Conference on Artificial Intelligence and Teacher Education (ICAITE) · 117-124

Scheduling courses is a routine yet important task in Smart educational activities. Traditional manual scheduling is time-consuming and labor-intensive, prone to errors, and unable to meet the demands of large-scale scheduling. Classic genetic algorithms for scheduling have issues such as rapid convergence and decreased scheduling efficiency as constraint factors increase. To address these problems in existing scheduling genetic algorithms, we propose a self-learning genetic algorithm for scheduling based on deep reinforcement learning (GAGDRL). The GAGDRL algorithm utilizes the Q-learning algorithm to achieve adaptive adjustment of crossover and mutation parameters, enhancing the search capability of the genetic algorithm. Establishing a parameter dynamic adjustment model for the Markov decision process (MDP) analyzes the state set of the population fitness function to achieve a comprehensive evaluation of the overall performance of the population. Additionally, the deep Q-network (DQN) algorithm is introduced into the scheduling problem to address issues related to the large number of population states and the volume of Q-table data in scheduling. Experimental results show that, compared to classical and improved genetic algorithms for scheduling, the GAGDRL algorithm improves accuracy and optimization capability. The proposed algorithm can also be applied to problems such as exam scheduling, cinema seating arrangements, and airline route planning.

course schedulingsmart educationgenetic algorithmdeep reinforcement learning
مقالوصول مغلق20242استشهاد· Semantic Scholar

Identification of rheumatoid arthritis using bone image features with radial basis function neural networks

International Journal of Imaging Systems and Technology · مجلد 34 (3)

Abstract Rheumatoid arthritis (RA) leads to the destruction, deformation, and loss of function and causes joint damages to 85% of patients. The detection of bone mineral density from traditional x‐ray images consumes more time and it is observer dependent which decreases the evaluation performance when RA is in its early stage. Therefore, it is necessary to develop an observer‐independent computer‐aided automatic analysis system for evaluating JS narrowing. An efficient RA detection system based on feed‐forward neural network is proposed in this article. Initially the dataset is preprocessed to remove blur, redundant data and nonlinearities in RA images using wiener filter in less computation time. The edge boundaries are detected using nonlinear partial differential equation as the texture features of bones has great impact on the system accuracy. The detection strategy is implemented by optimized gray‐level co‐occurrence matrix based on bone image features. The selected features are optimized by genetic algorithm to improve the classification performance. The images are then classified as inflamed and noninflamed by radial basis function neural network. The effectiveness of the proposed classification approach is verified in terms of accuracy, sensitivity, and specificity and compared with the conventional convolutional neural network, artificial neural network, and support vector machine classifiers. Among the several existing techniques, our method found to be much effective with a maximum accuracy of 98.5% as some novel approaches are proposed and also tends to possess more compatible than the present system. Our computerized rheumatoid arteries detection approach will give more precise and flawless consistency rate.

rheumatoid arthritisjoint space narrowingbone mineral densitycomputer-aided diagnosis
مقالوصول مفتوح202211استشهاد· Semantic Scholar

A Novel Approach to Face Pattern Analysis

Electronics · مجلد 11 (3) · 444-444

Recognizing facial expressions is a major challenge and will be required in the latest fields of research such as the industrial Internet of Things. Currently, the available methods are useful for detecting singular facial images, but they are very hard to extract. The main aim of face detection is to capture an image in real-time and search for the image in the available dataset. So, by using this biometric feature, one can recognize and verify the person’s image by their facial features. Many researchers have used Principal Component Analysis (PCA), Support Vector Machine (SVM), a combination of PCA and SVM, PCA with an Artificial Neural Network, and even the traditional PCA-SVM to improve face recognition. PCA-SVM is better than PCA-ANN as PCA-ANN has the limitation of a small dataset. As far as classification and generalization are concerned, SVM requires fewer parameters and generates less generalization errors than an ANN. In this paper, we propose a new framework, called FRS-DCT-SVM, that uses GA-RBF for face detection and optimization and the discrete cosine transform (DCT) to extract features. FRS-DCT-SVM using GA-RBF gives better results in terms of clustering time. The average accuracy received by FRS-DCT-SVM using GA-RBF is 98.346, which is better than that of PCA-SVM and SVM-DCT (86.668 and 96.098, respectively). In addition, a comparison is made based on the training, testing, and classification times.

face recognitionface detectiondiscrete cosine transformgenetic algorithm
مقالوصول مفتوح20228استشهاد· Semantic Scholar

An Optimization Approach for Convolutional Neural Network Using Non-Dominated Sorted Genetic Algorithm-II

Computers, materials & continua/Computers, materials & continua (Print) · مجلد 74 (3) · 5641-5661

In computer vision, convolutional neural networks have a wide range of uses. Images represent most of today’s data, so it’s important to know how to handle these large amounts of data efficiently. Convolutional neural networks have been shown to solve image processing problems effectively. However, when designing the network structure for a particular problem, you need to adjust the hyperparameters for higher accuracy. This technique is time consuming and requires a lot of work and domain knowledge. Designing a convolutional neural network architecture is a classic NP-hard optimization challenge. On the other hand, different datasets require different combinations of models or hyperparameters, which can be time consuming and inconvenient. Various approaches have been proposed to overcome this problem, such as grid search limited to low-dimensional space and queuing by random selection. To address this issue, we propose an evolutionary algorithm-based approach that dynamically enhances the structure of Convolution Neural Networks (CNNs) using optimized hyperparameters. This study proposes a method using Non-dominated sorted genetic algorithms (NSGA) to improve the hyperparameters of the CNN model. In addition, different types and parameter ranges of existing genetic algorithms are used. A comparative study was conducted with various state-of-the-art methodologies and algorithms. Experiments have shown that our proposed approach is superior to previous methods in terms of classification accuracy, and the results are published in modern computing literature.

convolutional neural network architecture optimizationhyperparameter optimizationNSGA-IImulti-objective evolutionary algorithms