Ain Shams Engineering Journal · مجلد 17 (5) · 104098-104098
The rapid growth of cities demands sophisticated decision support systems capable of simultaneously tackling social, economic, and environmental issues in urban planning. This research introduces a comprehensive decision-making framework that integrates machine learning to optimize urban infrastructure development. To improve the reliability of the analysis, recursive feature elimination paired with random forest (RF-RFE) is utilized to pinpoint the most critical factors, ensuring that the decision process emphasizes the features that matter most. To handle uncertainty and vagueness in expert evaluations, picture fuzzy sets are implemented, allowing a nuanced expression of hesitation, while the entropy method is employed to objectively determine the weights of social, economic, and environmental criteria, thereby reducing subjective influence. The evaluation based on the approach of relative utility and nonlinear standardization (ERUNS) is employed to rank urban planning alternatives, capturing the nonlinear interactions among criteria. This framework provides a comprehensive, data-driven decision support tool for urban planners and policymakers to address the intricate and dynamic challenges of modern urbanization.
picture fuzzy setsmulti-criteria decision makingurban planningdecision support system
Thermodynamic cycle models are routinely assembled from heterogeneous sources – steam-table lookups, manufacturer data sheets, handbook correlations, and hand-computed preliminary estimates – and an error introduced in any one source (a misread enthalpy, a sign error in a heat balance, a wrong coefficient-of-performance value) can propagate silently through every downstream calculation. Engineers currently guard against this by checking governing equations pairwise, but pairwise checking has a structural blind spot: a set of equations can pass every pairwise comparison and still be globally infeasible as a system. We develop a linear-algebraic diagnostic framework that closes this gap. The governing equations of a steady-state thermodynamic cycle – energy balances over turbines, compressors, boilers, condensers, and expansion devices, together with isentropic-process relations and the coefficient-of-performance definition – form a linear system A x = b whose state vector x collects enthalpies, heat transfer rates, and work quantities at each process node. We show that global inconsistency of this system is equivalent to infeasibility of A x = b , and that infeasibility is always witnessed by a vector in the left nullspace of A that is not orthogonal to b – an algebraically certifiable condition we call a nullspace inconsistency certificate , computable from a single thin SVD and fundamentally inaccessible to pairwise checking. Building on this certificate, we prove that pairwise consistency checks are provably insufficient to detect global thermodynamic inconsistency; we establish existence and uniqueness of a minimum-norm repair vector that returns the right-hand-side data to the nearest feasible point on the constraint manifold; we derive equation-localization weights that rank which governing equation is the primary source of a fault; and we construct a differentiable repair operator whose fixed points correspond to globally self-consistent cycle models. The complete detection-localization-repair pipeline runs in O ( kn 2 ) time via a thin SVD – negligible overhead for cycle models of practical size – and requires no information beyond the equations and data an engineer already has on hand. We demonstrate the framework on the Rankine steam-power cycle and the vapor-compression refrigeration cycle, where it correctly detects, localizes, and corrects hidden inconsistencies – including a 50 kJ kg − 1 enthalpy error in Rankine cycle steam tables and a simultaneous condenser-balance fault with an erroneous COP value in the refrigeration cycle – that pass all pairwise equation checks yet render the global model infeasible. We further discuss how the certificate behaves under measurement and property-estimation uncertainty, and compare the approach against residual-based checking, data-reconciliation, and optimization-based fault detection. The framework requires only the linear (or linearized) governing equations and standard property data already used in routine cycle calculations, making it directly deployable as an auditing layer in existing engineering workflows.
Bio-based solutions are becoming more and more important in the shift to global sustainability. Sustainable microbiology becomes a crucial field that connects the Sustainable Development Goals (SDGs) of the UN with molecular mechanisms. The many functions of microorganisms as functional drivers of the 2030 Agenda are critically assessed in this review, which goes beyond the conventional view of them as pathogens to consider them as “biological infrastructure.” The development of biopesticides for food security (SDG 2), the engineering of exoelectrogenic biofilms for clean energy (SDG 7), and the optimization of metabolic flux in circular bioeconomies (SDG 12) are just a few of the major SDGs for which we examined the integration of microbial processes. “Structural Biotechnology,” where microbes help create self-healing urban environments (SDG 11) and act as carbon-sequestering allies in mitigating climate feedback loops (SDG 13), was given particular attention. This report also addressed the “Biotech Divide,” arguing that in order to achieve SDGs 10 (Reduced Inequalities) and 16 (Peace and Justice), biological infrastructure protection and fair access to genomic surveillance were essential in areas affected by conflict. Our results highlight the importance of maintaining microbial diversity for human health and economic resilience, rather than just as an environmental objective. The review concludes that interdisciplinary collaborations (SDG 17) that convert laboratory-scale bioprocesses into scalable, worldwide sustainability solutions are the only way to fully realize the potential of microbiology.
Sustainable Development Goalsbiopesticidesfood securityclean energy
Case Studies in Thermal Engineering · مجلد 76 · 107397-107397
This work provides a detailed evaluation of a novel biomass-fueled multigeneration system, conceived to contribute to the growing emphasis on sustainable energy solutions. The architecture comprises a biomass gasifier, an innovative cascaded organic Rankine cycle (CORC) incorporating a high-temperature mixture in the top cycle, a proton exchange membrane electrolyzer (PEME), a Brayton cycle, and waste heat utilization units, all operating together to deliver electricity, hydrogen (H 2 ), and thermal output. A comprehensive thermodynamic modeling framework is established to evaluate the system’s performance across various operational scenarios. The framework emphasizes critical metrics, including exergy efficiency, levelized total emissions (LTE), and payback period (PP). These indicators ensure a holistic assessment of energy, exergy, economic, and environmental considerations. Parametric studies demonstrate that enhancements in biomass mass flow rate and combustion chamber temperature significantly increase power output and H 2 production while reducing the payback period, underscoring the system’s flexibility and economic feasibility. Furthermore, the study employs sophisticated machine learning optimization methods, combining artificial neural networks (ANNs) with genetic algorithms (GA), to determine optimal operating conditions with minimal computational effort and maximum efficiency. When evaluated at nominal parameters, the system records an exergy efficiency of 23.72%, achieves a PP of 5.61 years, and yields an LTE value of 0.34 ton/GJ. However, under optimized conditions, these values improve to 35.01%, 3.78 years, and 0.241 ton/GJ, respectively.
Accurate brain tumor detection is essential for prompt treatment and better patient outcomes. Nevertheless, segmentation errors and classification constraints plague current approaches. With the goal of improving brain tumor detection accuracy and dependability, this research holds hope for improved patient outcomes and a greater understanding of tumor pathology. This paper introduces a novel DeepNeuroXpert (DN-XPert) model to segment and classify brain tumors, accompanied by three other models: the NSAS-Net or Nested Self-Attentive Segmentation Network (NSAS-Net), AI2CF Classification that is Attention-Integrated Inception Capsule Fusion (AI2CF) Classification, and WPSO for Parameter Tuning which stands for Wombat-Pelican Synergy Optimization. Our research is focused on addressing the challenges in medical image analysis. We propose new ways to enhance precision and dependability of brain tumor detection using DN-Xpert, a technique that uses advanced deep learning methods for accurate segmentation and classification of tumors in the brain. Furthermore, the DN-Xpert and its partner models have shown high-level performance by exceeding benchmarks with accuracy that goes up to 99.4 % and precision, recall, and F1-score metrics reaching a maximum of 99 %. This outstanding accuracy emphasizes the potential power of our unique approaches in changing how we detect and classify brain tumors.
Fundoscopic diagnosis involves assessing the proper functioning of the eye’s nerves, blood vessels, retinal health, and the impact of diabetes on the optic nerves. Fundus disorders are a major global health concern, affecti... | Find, read and cite all the research you need on Tech Science Press
With the increasing complexity of hotel selection, traditional decision-making models often struggle to account for uncertainty and interrelated criteria. Multi-criteria decision-making (MCDM) techniques, particularly those b... | Find, read and cite all the research you need on Tech Science Press
hotel recommendationtourist preferencescircular intuitionistic fuzzy setsmulti-criteria decision making
Environmental problems are intensifying due to the rapid growth of the population, industry, and urban infrastructure. This expansion has resulted in increased air and water pollution, intensified urban heat island effects, a... | Find, read and cite all the research you need on Tech Science Press
Case Studies in Thermal Engineering · مجلد 75 · 107084-107084
This study focuses on waste energy recovery and environmental protection through the evaluation of an integrated clean energy system combining compressed air energy storage, a solid oxide fuel cell, and a heat recovery unit. Designed to sustainably generate power, heat, and compressed air, the system's performance is assessed from energy, exergy, and environmental perspectives. Results show that recovering waste energy by optimizing current density significantly boosts outputs, power increases from 95.46 kW to 165.8 kW, heat recovery improves from 195.6 kW to 483 kW, and compressed air generation rises from 278.8 g/s to 535.6 g/s. However, higher current density also raises electrical emissions (from 850 to 1142 kg/MWh) and cycle emissions (from 278.8 to 291.8 kg/MWh), despite a reduction in thermal emissions (from 414.9 to 392 kg/MWh), underscoring the environmental trade-offs involved. The system demonstrated energy efficiencies ranging from 60.31% to 63.85% and exergy efficiencies between 27.5% and 32.87%, depending on operating conditions. Furthermore, elevated temperatures and utilization rates negatively affect both energy and exergy efficiencies, with improved efficiencies observed at lower current densities and temperatures. These insights emphasize the importance of balancing operational parameters to maximize waste energy recovery while minimizing environmental impacts, contributing to the advancement of sustainable and efficient hybrid clean energy technologies.
waste heat recoverycompressed air energy storagesolid oxide fuel cellsheat recovery units
KSII Transactions on Internet and Information Systems · مجلد 19 (10)
Human-Computer Interaction for autonomous communication systems is traditionally developed through the stages of the usability engineering paradigm.However, a major challenge within this paradigm is synchronizing evolving user needs with the dynamic interaction environment.To address this gap, this article proposes the Relativity Turner Training Algorithm (RTTA).The algorithm estimates the relativity measure between the user's interaction context and the actual requirements, allowing the system to adapt more effectively over time.Unlike rule-based techniques, the RTTA leverages machine learning to identify contextual adjustment trends and optimize requirement matching, drawing on past interaction data.The relativity factor is derived from users' previous interaction responses.When relativity is low, the algorithm anticipates potential context changes.The "Turner" component then evaluates whether these changes can yield higher relativity-that is, a closer alignment between the new context and the user's requirements.If such alignment is achieved, interaction quality improves, and the need for further adjustments decreases.In this way, the algorithm dynamically balances relativity (measuring context-requirement alignment) and Asma Aledrees et al.: Enhancing Human-Computer Interaction Context Awareness through the Relativity Turner Training Algorithm Turner (guiding beneficial context shifts) across both short-and long-term interaction intervals.To advance research in adaptive HCI systems, the proposed RTTA framework provides a robust foundation by enabling the seamless integration of advanced machine learning techniques with multimodal interaction methods.
Serbian Journal of Electrical Engineering · مجلد 22 (2) · 223-241
The Internet of Things (IoT) is now present in every aspect of our daily lives because of its ability to offer remote services. Unfortunately, the insecure transmission of user data in open channels caused by this significant use of IoT networks makes it vulnerable to malicious use. Hence, the security of the user?s data is now a serious matter in an IoT environment. Since authentication may prevent hackers from recovering and using data transmitted between IoT devices, researchers have proposed many lightweight IoT authentication protocols over the past decades. Many of these protocols are built around two authentication factors. They cannot guarantee unlinkability and perfect forward secrecy, as well as withstand well-known attacks such as node capture, DOS attack, stolen verifier, Denning-Sacco attack, and GWN bypass. This paper proposes an Elliptic Curve Cryptography (ECC) -based authentication protocol that is anonymous and exploits three authentication factors to ensure all security services and withstand well-known attacks. Our provided protocol is secure and can resist known attacks, as demonstrated by both informal security analysis and formal security proof using ProVerif. Lastly, our protocol and other protocols are compared in terms of computational costs, communication costs, and security features.
Smart grid represents an advanced and interconnected system that incorporates modern technologies to enhance efficiency, reliability and sustainability. In comparison to the conventional grid, the smart grid (SG) uses many cutting-edge technologies. This research introduces a fog computing encryption-based model for privacy preservation in the smart grid model. By using different advanced technologies, our model addresses the balance between privacy, security, effectiveness and functionality. The model facilitates efficient communication and function inquiry while mitigating challenges posed by massive Internet of Things (IoT) systems in the smart grid environment. Specifically, it tackles the secure data consolidation challenge by employing encryption-based techniques for transmitting private data from smart meters to fog devices. These devices consolidate the data before updating to cloud. Conventional data consolidation approaches for SGs have high computation and communication costs and suffer from high storage requirement. The proposed model resolves these issues; algorithms for data consolidation and extraction of data at fog device and cloud respectively to obtain the secure communication has also been included. The performance of the developed mechanism has been computed against existing data consolidation mechanisms GCEDA (Grouping of Clusters for Efficient Data Aggregation), SPPDA (Secure Privacy-Preserving Data Aggregation) and LPDA (Lightweight Privacy-preserving Data Aggregation) for numerous performance parameters. And the results proves that the performance of developed mechanism with respect to bytes of storage, communication cost and ratio of transmission is better than the existing ones.
smart gridInternet of Thingsfog computingdata encryption
Traffic management is a critical activity, the population is increasing day by day and so the traffic on the road is also increasing. Traffic jams and long waiting queues of vehicles at the road crossing are now part of everyone's life. The traffic lights used at the crossing to regulate the traffic play a vital role in the smooth functioning of traffic movement. At a crossing of four roads, it has been observed that giving an equal amount of green light to all roads is meaningless since the arrival of traffic on different paths is different. Importantly, the arrival rate is responsible for all traffic jams, long queues, and increased waiting time. Therefore, this paper suggests a green light allocation scheme for all paths i depending on the arrival rate of the vehicles. Thus, the allocation of green light will be dynamic. Further, weight is also computed, where more arrival rate means more weight, thereby assigning more time to the green signal. This will help in reducing the long queue length, residual traffic, and long waiting times. On simulating the traffic with the traffic data, the proposed optimized green light allocation scheme to path i reduces the residue traffic to negligible, allowing smooth traffic flow even during peak hours. The work also provides a proficient optimization of the waiting time of vehicles accumulated during the red light. According to the simulation, the maximum time assigned for the green signal during the peak hour of 9:30 AM to 10:00 AM for paths i, where 1≤i≤4 is 39.96, 33.36, 26.64, and 20.04 seconds respectively. Similarly, during the second rush hour of 5:00 PM to 6:00 PM, the simulation assigns a green signal time of 41.4, 37.2, 24.84, and 16.56 seconds for corresponding paths 1–4. Thus, the proposed work suggests an effective traffic management scheme at the four-road crossing.
traffic signal controlroad crossingvehicle waiting timetraffic congestion
Case Studies in Thermal Engineering · مجلد 58 · 104359-104359
The intriguing thermophysical properties of nanoparticles have considerable potential in thermal transportation for engineering applications. The inclusion of solid nanoparticles in the base fluid raises the fluid's thermal conductivity, which improves thermal transfer characteristics. Thus, an analysis is performed by assuming the Tiwari and Das model, for the flow and energy transportation aspects of hybrid nanoparticles in a shrinkable porous medium. The current study focuses on the thermal heat transfer performance on the dynamic of ethylene glycol-based titania and alumina nanoparticles. The flow-controlling system of PDEs is transformed into a system of non-linear ODEs by using similarity transformations, and the resulting equations are then solved numerically through the solver bvp4c in Matlab function with a limit of tolerance . The multiple branches of solutions are noted for distinct values of suction and shrinking parameters. The outcomes reveal that the inclusion of titania and alumina nanocomposites improves the thermophysical properties of the base fluid significantly. The findings indicate that hybrid nanofluids are more effective for increasing the thermal transport rate. Further, in the upper branch solution, the friction drags, and energy transportation rate raises for the higher influence of suction strength while it declines for the lower branch.
hybrid nanofluidheat generation and absorptionTiwari-Das modeltitanium dioxide nanoparticles
Frontiers in Computational Neuroscience · مجلد 18 · 1489463-1489463
Autism spectrum disorder (ASD) is a neurodevelopmental condition marked by notable challenges in cognitive function, understanding language, recognizing objects, interacting with others, and communicating effectively. Its origins are mainly genetic, and identifying it early and intervening promptly can reduce the necessity for extensive medical treatments and lengthy diagnostic procedures for those impacted by ASD. This research is designed with two types of experimentation for ASD analysis. In the first set of experiments, authors utilized three feature engineering techniques (Chi-square, backward feature elimination, and PCA) with multiple machine learning models for autism presence prediction in toddlers. The proposed XGBoost 2.0 obtained 99% accuracy, F1 score, and recall with 98% precision with chi-square significant features. In the second scenario, main focus shifts to identifying tailored educational methods for children with ASD through the assessment of their behavioral, verbal, and physical responses. Again, the proposed approach performs well with 99% accuracy, F1 score, recall, and precision. In this research, cross-validation technique is also implemented to check the stability of the proposed model along with the comparison of previously published research works to show the significance of the proposed model. This study aims to develop personalized educational strategies for individuals with ASD using machine learning techniques to meet their specific needs better.