Acta Mechanica et Automatica · مجلد 18 (3) · 536-547
Abstract The mixed convection heat transfer of nanofluid flow in a heated square cylinder under the influence of a magnetic field is considered in this paper. ANSYS FLUENT computational fluid dynamics (CFD) software with a finite volume approach is used to solve unsteady two-dimensional Navier-Stokes and energy equations. The numerical solutions for velocity, thermal conductivity, temperature, Nusselt number and the effect of the parameters have been obtained; the intensity of the magnetic field, Richardson number, nanoparticle volume fraction, magnetic field parameter and nanoparticle diameter have also been investigated. The results indicate that as the dimensions of nanoparticles decrease, there is an observed augmentation in heat transfer rates from the square cylinder for a fixed volume concentration. This increment in heat transfer rate becomes approximately 2.5%–5% when nanoparticle size decreases from 100 nm to 30 nm for various particle volume fractions. Moreover, the magnitude of the Nusselt number enhances with the increase in magnetic field intensity and has the opposite impact on the Richardson number. The findings of the present study bear substantial implications for diverse applications, particularly in the realm of thermal management systems, where optimising heat transfer is crucial for enhancing the efficiency of electronic devices, cooling systems and other technological advancements.
magnetohydrodynamic nanofluidmixed convectionentropy productionNusselt number
Saudi Pharmaceutical Journal · مجلد 32 (9) · 102152-102152
Skin infections considered as one of the predominant disorders that could greatly influence humans. Topical drug delivery is believed to be an effective substitute to systemically delivered medication for skin disorders management. Erythromycin has been proven to retain anti-bacterial activity. Based on that, the aim of existent study is to develop a proper nanocarrier, namely; nanoemulsion using tea tree oil including Erythromycin. Applying quality by design approach, the optimized nanoemulsion was selected based on number of independent variables namely; particle size and in vitro release study. Yet, in order to get appropriate topical application, the optimized nanoemulsion was combined with previously prepared hydrogel base to provide Erythromycin based nanoemulgel. The developed nanoemulgel was assessed for its organoleptic and physical characters to ensure its suitability for topical application. Stability study was implemented over three months after being kept in two distinct environments. Eventually, the antibacterial behavior of the preparation was investigated on MRSA to verify the expected antibacterial improvement and validate the effectiveness of the developed nanocarrier. The formulation showed consistent appearance, with pH (6.11 ± 0.19), viscosity (10400 ± 1275 cP), spreadability (54.03 ± 2.3 mm), extrudability (80.36 ± 3.15 g/cm2) and drug content (99.3 ± 0.46 %) that seemed to be satisfied for topical application. It could provide 48.1 ± 4.2 % releases over 6 h in addition to be stable at room temperature and at refrigerator. Ultimately, the formula showed a significant antibacterial activity against MRSA proving the combination and the nanocarrier effectiveness.
Journal of King Saud University - Science · مجلد 36 (11) · 103536-103536
This study introduces a sustainable method for producing silver nanoparticles (AgNPs), focusing on sustainability and environmental protection.The technique includes the use of Salvia elegans aqueous leaf extract as a reducing agent.In addition, the research investigates the dose-dependent degradation of pUC19 DNA by silver nanoparticles, which is facilitated by the generation of singlet oxygen.The presence of S. elegans extract results in significant color changes, going from a colorless state to a dark brown hue, serving as an indication of the synthesis of AgNPs.A range of experimental methods were employed to analyze the biogenic AgNPs, such as UV-visible absorption spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM).The meticulously produced AgNPs demonstrate a high level of uniformity, featuring a spherical shape and a particle size of 60 nm.DNA photo-cleavage studies show that singlet oxygen plays a crucial role in triggering DNA damage caused by AgNPs, indicating their potential as powerful cytotoxic agents specifically aimed at cancer cells.Additional studies are required to clarify the effectiveness and specificity of AgNPs against various cancer cell types to assess their therapeutic potential.The cytotoxic effects of AgNPs, particularly in relation to DNA photocleavage, are of considerable interest in cancer research.This research holds promise for developing novel and sustainable cancer therapies based on the unique properties of biogenic silver nanoparticles.
International Journal of Nanomedicine · مجلد Volume 19 · 7945-7961
Background: Monitoring noncommunicable diseases is regarded as a critical concern that has to be managed in order to avoid a wide variety of complications such as increasing blood lipid levels known as dyslipidemia. Statin drugs, mostly, Rosuvastatin (RSV) was investigated for its effectiveness in treating dyslipidemia. However, reaching the most efficient treatment is essential and improving the effect of RSV is crucial. Therefore, a combination therapy was a good approach for achieving significant benefit. Although RSV is hydrophobic, which would affect its absorption and bioavailability following oral administration, overcoming this obstacle was important. Purpose: To that end, the purpose of the present investigation was to incorporate RSV into certain lipid-based nanocarriers, namely, nanostructured lipid carrier (NLC) prepared with virgin coconut oil (CCO). Methods: The optimized RSV-NLC formula was selected, characterized and examined for its in vitro, kinetic, and stability profiles. Eventually, the formula was investigated for its in vivo hypolipidemic action. Results: The optimized NLC formulation showed a suitable particle size (279.3±5.03 nm) with PDI 0.237 and displayed good entrapment efficiency (75.6±1.9%). Regarding in vitro release, it was efficiently prolonged for 24 h providing 93.7±1.47%. The optimized formula was established to be stable after 3 months storage at two different conditions; 4°C and 25°C. Importantly, including CCO in the development of RSV-NLC could impressively enhance lowering total cholesterol level in obese rat models, which endorse the potential synergistic action between RSV and CCO. Conclusion: The study could elucidate the impact of developing NLC using CCO for improving RSV anti-hyperlipidemic activity.
Science of Advanced Materials · مجلد 16 (4) · 555-562
Bio-synthesizing metal nanoparticles have gained global attention and interest because of their fast, non-toxic, cost-effective, one-step process, and environmentally friendly alternative. For its chemical, physical characteristics, nanoparticles have attracted a lot of interest in different areas, such as materials science and medicine, as well as electronics. The research is centered on the investigation of phytochemicals, and the subsequent characterization of these particles. The study also delves into the potential biological applications of zinc nanoparticles (ZnONPs). The Psidium guajava stem extract was utilized for ZnONPs synthesis. A comprehensive phytochemical analysis was performed on the extracted stem extract, revealing the presence of a diverse range of phytochemicals such as phenols, saponins, triterpenoids, steroids, tannin, catechin, and glycosides. The application of zinc ions to the bark extract resulted in the biosynthesis ZnONPs, which were then analyzed by UV-Vis spectral studies. The ZnONPs exhibited a surface plasmon resonance band at 368 nm and had a crystalline structure according to the X-ray diffraction spectrum. The scanning electron microscope revealed that the nanoparticles had a polydisperse distribution and a particle size ranging from 30 to 35 nm. The identification of the biomolecule group involved in the synthesis was made possible through the recording of the FTIR spectrum. The antibacterial activity of the ZnONPs was tested using the disc diffusion method against gram positive and negative bacteria. The results showed that the maximum zone of inhibition of ZnONP’s was 16±0.1 mm against P. aeruginosa and minimum zone of inhibition was against S. aureus 8±0.3 mm.
Journal of Biological Regulators and Homeostatic Agents/Journal of Biological Regulators & Homeostatic Agents · مجلد 38 (7)
Background: Due to its low water solubility, Rutin, a crystalline medication used to treat a variety of conditions, has a limited rate of dissolution when given in gastrointestinal fluids. The present study planned to formulate and characterize Rutin using mesoporous silica material (SBA-15) as well as to determine the in-vitro dissolution properties. Methods: Rutin was formulated using mesoporous silica material such as SBA-15. Particle size distribution analysis, fourier transform-infrared (FT-IR) spectroscopy, scanning electron microscopy, and X-ray diffraction were used to characterize the compound in the complex. Rutins solubility and in-vitro release characteristics were assessed. Furthermore, the dissolution data (DD) Solver Excel add-in software was used to evaluate several mathematical models to interpret the Rutin dissolution kinetics from the mesoporous materials. Results: Differential scanning calorimetry was used to confirm Rutins amorphous state, which resulted in a significantly higher rate of dissolution than pure crystalline Rutin. The release of the drug from the Rutin/SBA-15 complex was well-simulated by the Weibull model. Notably, the SBA-15 carrier-mediated complex of Rutin exhibited the highest drug loading and dissolution rate, showing promising potential for enhancing Rutin bioavailability. Conclusion: The findings suggested that Rutin/SBA-15 could be easily incorporated into conventional oral pharmaceutical dosage forms such as capsules and therefore can be utilized for treating ailments such as allergies, inflammation, tumors, infections, protozoal diseases, and spasms. To assess the Rutin/SBA-15 complexs in-vivo pharmacokinetic performance and appropriateness for a range of pharmacological actions, more investigation is required.
Itraconazole (ITZ) is a triazole antifungal agent characterized by broad-spectrum activity against fungal infections. The main drawback of ITZ, when applied topically, is the low skin permeability due to the stratum corneum, the outermost layer of the skin, which represents the main barrier for drug penetration. Therefore, this study aimed to prepare itraconazole as transferosomes (ITZ-TFS) to overcome the barrier function of the skin. ITZ-TFSs were prepared by thin lipid film hydration technique using different surfactants, sodium lauryl sulfate (SLS) and sodium deoxycholate (SDC). The prepared ITZ-TFS were evaluated for entrapment efficiency (EE) %, particle size, polydispersity index (PDI), zeta potential, and in vitro drug release to obtain an optimized formula. The surface morphology of the optimized formula of ITZ-TFS was determined by transmission electron microscope (TEM). The optimized formulation was prepared in the form of gel using hydroxyl propyl methyl cellulose (HPMC) gel base. The prepared ITZ-TFS gel was evaluated for homogeneity, drug content, spreadability, pH, and in vitro antifungal activity in comparison with the free ITZ gel. The prepared ITZ-TFS formulations exhibited high EE% ranging from 89.02 ± 1.65% to 98.17 ± 1.28% with particle size ranging from 132.6 ± 2.15 nm to 384.1 ± 3.46. The PDI for all ITZ-TFSs was less than 0.5 and had a negative zeta potential. The TEM image for the optimized formulation (ITZ-TFS4) showed spherical vesicles with a smooth surface. The prepared gels had good spreadability, pH, and acceptable drug content. ITZ-TFS gel showed higher antifungal activity than free ITZ gel as determined by zone of inhibition. ITZ was successfully prepared in form of TFSs with higher antifungal activity than the free drug.
Quercetin (QtN) displays low systemic bioavailability caused by poor water solubility and instability. Consequently, it exerts limited anticancer action in vivo. One solution to increase the anticancer efficacy of QtN is the use of appropriate functionalized nanocarriers that preferentially target and deliver the drug to the tumor location. Herein, a direct advanced method was designed to develop water-soluble hyaluronic acid (HA)-QtN-conjugated silver nanoparticles (AgNPs). HA-QtN reduced silver nitrate (AgNO3) while acting as a stabilizing agent to produce AgNPs. Further, HA-QtN#AgNPs served as an anchor for folate/folic acid (FA) conjugated with polyethylene glycol (PEG). The resulting PEG-FA-HA-QtN#AgNPs (further abbreviated as PF/HA-QtN#AgNPs) were characterized both in vitro and ex vivo. Physical characterizations included UV-visible (UV-Vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), particle size (PS) and zeta potential (ZP) measurements, and biopharmaceutical evaluations. The biopharmaceutical evaluations included analyses of the cytotoxic effects on the HeLa and Caco-2 cancer cell lines using the MTT assay; cellular drug intake into cancer cells using flow cytometry and confocal microscopy; and blood compatibility using an automatic hematology analyzer, a diode array spectrophotometer, and an enzyme-linked immunosorbent assay (ELISA). The prepared hybrid delivery nanosystem was hemocompatible and more oncocytotoxic than the free, pure QtN. Therefore, PF/HA-QtN#AgNPs represent a smart nano-based drug delivery system (NDDS) and could be a promising oncotherapeutic option if the data are validated in vivo.
Excisional wounds are considered one of the most common physical injuries. This study aims to test the effect of a nanophytosomal formulation loaded with a dried hydroalcoholic extract of S. platensis on promoting excisional wound healing. The Spirulina platensis nanophytosomal formulation (SPNP) containing 100 mg PC and 50 mg CH exhibited optimum physicochemical characteristics regarding particle size (598.40 ± 9.68 nm), zeta potential (−19.8 ± 0.49 mV), entrapment efficiency (62.76 ± 1.75%), and Q6h (74.00 ± 1.90%). It was selected to prepare an HPMC gel (SPNP-gel). Through metabolomic profiling of the algal extract, thirteen compounds were identified. Molecular docking of the identified compounds on the active site of the HMGB-1 protein revealed that 12,13-DiHome had the highest docking score of −7.130 kcal/mol. SPNP-gel showed higher wound closure potential and enhanced histopathological alterations as compared to standard (MEBO® ointment) and S. platensis gel in wounded Sprague-Dawley rats. Collectively, NPS promoted the wound healing process by enhancing the autophagy process (LC3B/Beclin-1) and the NRF-2/HO-1antioxidant pathway and halting the inflammatory (TNF-, NF-κB, TlR-4 and VEGF), apoptotic processes (AIF, Caspase-3), and the downregulation of HGMB-1 protein expression. The present study’s findings suggest that the topical application of SPNP-gel possesses a potential therapeutic effect in excisional wound healing, chiefly by downregulating HGMB-1 protein expression.
Gefitinib (GFT) is a tyrosine kinase inhibitor drug used as a first-line treatment for patients with advanced or metastatic non-small cell lung, colon, and breast cancer. GFT exhibits low solubility and hence low oral bioavailability, which restricts its clinical application. One of the most important trends in overcoming such problems is the use of a vesicular system. Cubosomes are considered one of the most important vesicular systems used to improve solubility and oral bioavailability. In this study, GFT cubosomal nanoparticles (GFT-CNPs) were prepared by the emulsification method. The selected formulation variables were analyzed and optimized by full factorial design and response surface methodology. Drug entrapment efficiency (EE%), transmission electron microscopy, particle size, polydispersity index, in vitro release and its kinetics, and the effect of storage studies were estimated. The chosen GFT-CNPs were subjected to further investigations as gene expression levels of tissue inhibitors of metalloproteinases-1 (TIMP-1) and matrix metalloproteinases-7 (MMP-7), colon biomarkers, and histopathological examination of colon tissues. The prepared GFT-CNPs were semi-cubic in shape, with high EE%, smaller vesicle size, and higher zeta potential values. The in vivo data showed a significant decrease in the serum level of embryonic antigen (CEA), carbohydrate antigen 19-9 (CA 19-9), and gene expression level of TIMP-1 and MMP-7. Histopathological examination showed enhancement in cancer tissue and highly decreased focal infiltration in the lamina propria after treatment with GFT-CNPs.
Water treatment through photocatalysts has become an important topic regarding environmental protection. In the present study, silver and TiO2 (Ag/TiO2) composites for photocatalysts were effectively synthesized by adopting the template induced method. The prepared samples were characterized using XRD, FTIR spectroscopy, SEM, and EDX. The constructed samples’ particle size and shape were evaluated using a SEM, and the XRD patterns showed anatase crystalline phases. Their morphologies were controllable with changing concentration of reactants and calcination temperature. The synthesized composites act as catalyst in the degradation of methylene blue (MB) and reduction of Cr(VI) to Cr(III) under solar irradiation. In both of these activities, the best result has been shown by the 0.01 Ag/TiO2 composite. Methanol is used as the hole scavenger in the reduction of Cr(VI) to Cr(III). While the pH factor is important in the photocatalytic reduction of Cr(VI) to Cr(III). According to observations, S. macrospora and S. maydis were each subject to 0.01 Ag/TiO2 nanocomposites maximum antifungal activity, which was 38.4 mm and 34.3 mm, respectively. The outcomes demonstrate that both photocatalytic and antifungal properties are effectively displayed by the constructed material.
Ag/TiO2 compositephotocatalytic reductionhexavalent chromiummethylene blue degradation
International Journal of Nanomedicine · مجلد Volume 18 · 5749-5780
Background: Despite recent advances in wound healing products, phytochemicals have been considered promising and attractive alternatives. Carvacrol (CAR), a natural phenolic compound, has been reported to be effective in wound healing. Purpose: This work endeavored to develop novel CAR-loaded phytosomes for the enhancement of the wound healing process. Methods: Molecular docking was performed to compare the affinities of the different types of phospholipids to CAR. Phytosomes were prepared by three methods (thin-film hydration, cosolvency, and salting out) using Lipoid S100 and Phospholipon 90H with three levels of saturation percent (0%, 50%, and 100%), and three levels of phospholipid molar percent (66.67%, 75%, and 80%). The optimization was performed using Design Expert where particle size, polydispersity index, and zeta potential were chosen as dependent variables. The optimized formula (F1) was further investigated regarding entrapment efficiency, TEM, 1 H-NMR, FT-IR, DSC, X-RD, in vitro release, ex vivo permeation, and stability. Furthermore, it was incorporated into a hydrogel formulation, and an in vivo study was conducted to investigate the wound-healing properties of F1. Results: F1 was chosen as the optimized formula prepared via the thin-film hydration method with a saturation percent and a phospholipid molar percent of zero and 66.67, respectively. TEM revealed the spherical shape of phytosomal vesicles with uniform size, while the results of 1 H-NMR, FT-IR, DSC, and X-RD confirmed the formation of the phytosomal complex. F1 demonstrated a higher in vitro release and a slower permeation than free CAR. The wound area of F1-treated animals showed a marked reduction associated with a high degree of collagen fiber deposition and enhanced cellular proliferation. Conclusion: F1 can be considered as a promising remedy for the enhancement of wound healing and hence it would be hoped to undergo further investigation. Graphical Abstract: Keywords: carvacrol, phospholipids, docking, phytosome, release, topical, wound healing
BCS class II molecules suffer from low oral bioavailability because of their poor permeability and sub-optimal aqueous solubility. One of the approaches to enhance their bioavailability is using cyclodextrin-based nanosponges. This study aimed to optimise and evaluate the feasibility of a microwave-assisted approach to synthesise nanosponges and improve domperidone's solubility and drug delivery potential. In the production process, microwave power level, response speed, and stirring speed were optimised using the Box-Behnken approach. Ultimately, the batch with the smallest particle size and highest yield was chosen. The optimised method of synthesis of the nanosponges resulted in a product yield of 77.4% and a particle size of 195.68 ± 2.16 nm. The nanocarriers had a drug entrapment capacity of 84 ± 4.2% and a zeta potential of -9.17± 0.43 mV. The similarity and the difference factors demonstrated proof-of-concept, showing that the drug release from the loaded nanosponges is significantly greater than the plain drug. Additionally, spectral and thermal characterisations, such as FTIR, DSC, and XRD, confirmed the entrapment of the drug within the nanocarrier. SEM scans revealed the porous nature of the nanocarriers. Microwave-assisted synthesis could be used as a better and greener approach to synthesise these nanocarriers. It could then be utilised to load drugs and improve their solubility, as seen in the case of domperidone.
domperidonesolubility enhancementBCS class II drugsmicrowave-assisted synthesis
body weight) intraperitoneally. All of the nutritional and biochemical parameters were statistically analyzed. A virtual docking study was conducted. Linalool nanoemulsion results showed the highest encapsulation efficiency (86.76%), while isoamyl acetate nanoparticles showed the lowest (69.99%). According to GC-MS analysis, encapsulation did not affect the flavoring structure with particle size distributions ranging from 277.3 to 628.8 nm. Using TEM, nanoemulsion particles appeared spherical with a desired nanometric diameter size. In the oral glucose tolerance test, flavorings in oil and nanoforms had no discernible hypoglycemia effects in normal rats. The nutritional and biochemical parameters confirmed that both normal and nanoencapsulation forms demonstrated a potential anti-hyperglycemic effect, and enhanced the rat health compared to the raw flavorings. The studied flavorings and their nanocapsules seem to have the potential double effect of a flavor compound as a food palatability enhancer with a potential beneficial effect on type 2 diabetes mellitus without any health drawbacks.