جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

49 مُخرَج نتائج البحث عن «Solubility»

مقالوصول مفتوح202316استشهاد· Semantic Scholar

Optimisation of a Greener-Approach for the Synthesis of Cyclodextrin-Based Nanosponges for the Solubility Enhancement of Domperidone, a BCS Class II Drug

Pharmaceuticals · مجلد 16 (4) · 567-567

BCS class II molecules suffer from low oral bioavailability because of their poor permeability and sub-optimal aqueous solubility. One of the approaches to enhance their bioavailability is using cyclodextrin-based nanosponges. This study aimed to optimise and evaluate the feasibility of a microwave-assisted approach to synthesise nanosponges and improve domperidone's solubility and drug delivery potential. In the production process, microwave power level, response speed, and stirring speed were optimised using the Box-Behnken approach. Ultimately, the batch with the smallest particle size and highest yield was chosen. The optimised method of synthesis of the nanosponges resulted in a product yield of 77.4% and a particle size of 195.68 ± 2.16 nm. The nanocarriers had a drug entrapment capacity of 84 ± 4.2% and a zeta potential of -9.17± 0.43 mV. The similarity and the difference factors demonstrated proof-of-concept, showing that the drug release from the loaded nanosponges is significantly greater than the plain drug. Additionally, spectral and thermal characterisations, such as FTIR, DSC, and XRD, confirmed the entrapment of the drug within the nanocarrier. SEM scans revealed the porous nature of the nanocarriers. Microwave-assisted synthesis could be used as a better and greener approach to synthesise these nanocarriers. It could then be utilised to load drugs and improve their solubility, as seen in the case of domperidone.

domperidonesolubility enhancementBCS class II drugsmicrowave-assisted synthesis
مقالوصول مفتوح202316استشهاد· Semantic Scholar

Optimization and In Vitro Characterization of Telmisartan Loaded Sodium Alginate Beads and Its In Vivo Efficacy Investigation in Hypertensive Induced Animal Model

Pharmaceutics · مجلد 15 (2) · 709-709

BACKGROUND: Antihypertensive drug telmisartan (TEL) belongs to BCS class II, which is characterized by low water solubility and, consequently, low oral bioavailability. Gastroretentive systems may overcome the problems associated with low solubility of TEL and incomplete absorption by localizing the drug release in the stomach. The purpose of this study was to prepare TEL-loaded, oil-entrapped, floating alginate beads with the intent of enhancing the oral bioavailability of TEL for the treatment of hypertension. METHODS: For the formulation and optimization of seventeen formulations of TEL-loaded oil-entrapped floating alginate beads, a central composite design was utilized. The concentration of sodium alginate (X1), the concentration of cross-linker (X2), and the concentration of sesame oil (X3) served as independent variables, whereas the entrapment efficiency (Y1), in vitro buoyancy (Y2), and drug release Q6h (Y3) served as dependent variables. Using the emulsion gelation method and calcium chloride as the cross-linking agent, different formulations of TEL alginate beads were produced. All formulations were evaluated for their entrapment efficiency percentage, in vitro buoyancy, and in vitro drug release. The optimal formulation of TEL alginate beads was prepared with and without oil and evaluated for entrapment efficiency percentage, in vitro buoyancy, swelling ratio, average size, and in vitro drug release. Using scanning electron microscopes, the surface morphology was determined. Using IR spectroscopy, the compatibility between the ingredients was determined. In vivo evaluation of the optimized formulation in comparison to the free TEL was done in hypertension-induced rats, and the systolic blood pressure and all pharmacokinetic parameters were measured. RESULTS: The prepared beads exhibited a high entrapment efficiency percentage, in vitro buoyancy, and prolonged drug release. TEL was compatible with other ingredients, as approved by IR spectroscopy. The prepared TEL beads were spherical, as shown by the SEM. The relative bioavailability of TEL-loaded oil-entrapped beads was 222.52%, which was higher than that of the pure TEL suspension. The prepared TEL beads formulation exhibited a higher antihypertensive effect for a prolonged time compared to pure TEL suspension. CONCLUSIONS: It can be concluded that this innovative delivery method of TEL-loaded oil-entrapped beads is a promising tool for enhancing drug solubility and, thus, oral bioavailability and therapeutic efficacy, resulting in enhanced patient compliance. Furthermore, the in vivo study confirmed the formulation's extended anti-hypertensive activity in animal models.

telmisartansodium alginate beadsfloating beadsgastroretentive drug delivery
مقالوصول مفتوح20239استشهاد· Semantic Scholar

Determination of Pterostilbene in Pharmaceutical Products Using a New HPLC Method and Its Application to Solubility and Stability Samples

Separations · مجلد 10 (3) · 178-178

The quantification of a natural bioactive compound, pterostilbene (PTT), in commercial capsule dosage form, solubility, and stability samples was carried out using a rapid and sensitive high-performance liquid chromatography (HPLC) approach. PTT was quantified on a Nucleodur (150 mm × 4.6 mm) RP C18 column with a particle size of 5 µm. Acetonitrile and water (90:10 v/v) made up the mobile phase, which was pumped at a flow speed of 1.0 mL/min. At a wavelength of 254 nm, PTT was detected. The developed HPLC approach was linear in 1–75 µg/g range, with a determination coefficient of 0.9995. The developed HPLC approach for PTT estimation was also rapid (Rt = 2.54 min), accurate (%recoveries = 98.10–101.93), precise (%CV = 0.59–1.25), and sensitive (LOD = 2.65 ng/g and LOQ = 7.95 ng/g). The applicability of developed HPLC approach was revealed by determining PTT in commercial capsule dosage form, solubility, and stability samples. The % assay of PTT in marketed capsules was determined to be 99.31%. The solubility of PTT in five different green solvents, including water, propylene glycol, ethanol, polyethylene glycol-400, and Carbitol was found to be 0.0180 mg/g, 1127 mg/g, 710.0 mg/g, 340.0 mg/g, and 571.0 mg/g, respectively. In addition, the precision and accuracy of stability samples were within the acceptable limit, hence PTT was found to be stable in solution. These results suggested that PTT in commercial products, solubility, and stability samples may be routinely determined using the established HPLC method.

pterostilbeneHPLC method developmentpharmaceutical quality controlcapsule dosage form
مقالوصول مغلق20233استشهاد· Semantic Scholar

Tree Seed Algorithm-based Feature Selection with Optimal Deep Learning Model for Supply Chain Management

Fluctuation and Noise Letters · مجلد 23 (02)

In recent days, supply chain and logistic industries have been going through a transformational wave of automation and digitization. Supply chain management (SCM) can involve machine learning (ML) abilities and prediction models to ensure that the demands are satisfied at a minimum cost. Intelligent models can be developed to determine whether adequate inventory is accessible to encounter the predictable rise in demands, and if not, the system spontaneously begins to adjust the orders with suppliers to source the raw materials for resolving the predicted future high demand. The conventional ways of SCM can be replaced by the design of recent artificial intelligence (AI) and deep learning (DL) techniques. By this motivation, this research presents a tree seed algorithm-based feature selection with optimum DL technique for supply chain management (TSA-ODLSCM). The proposed TSA-ODLSCM model involves the design of a feature subset selection approach using a tree search algorithm (TSA) algorithm. Besides, a new convolutional neural network with fuzzy cognitive maps (CNN-FCM) technique is designed for the classification process. Moreover, optimal parameter tuning of the CNN-FCM model was performed using the Henry gas solubility optimization (HGSO) technique. To exhibit the improved performance of the TSA-ODLSCM approach, a huge range of simulations were executed and outcomes were examined below several aspects. The experimental validation reported an enhanced 96.52% outcome of the TSA-ODLSCM approach over other methods.

supply chain managementfeature selectiontree seed algorithmconvolutional neural networks
مقالوصول مفتوح2022152استشهاد· Semantic Scholar

RETRACTED: Mechanism of chromium-induced toxicity in lungs, liver, and kidney and their ameliorative agents

Biomedicine & Pharmacotherapy · مجلد 151 · 113119-113119

Heavy metal Chromium (Cr), can adversely affect humans and their health if accumulated in organs of the body, such as the lungs, liver, and kidneys. Cr (VI) is highly toxic and has a higher solubility in water than Cr (III). One of the most common routes for Cr exposure is through inhalation and is associated with liver, lung, kidney damage, widespread dermatitis, GI tract damage, human lung cancer, cardiomyopathies, and cardiovascular disease. The increase in ROS production has been attributed to most of the damage caused by Cr toxicity. Cr-induced ROS-mediated oxidative stress has been seen to cause a redox imbalance affecting the antioxidant system balance in the body. The Nrf2 pathway dysregulation has been implicated in the same. Deregulation of histone acetylation and methylation has been observed, together with gene methylation in genes such as p16, MGMT, APC, hMLH1, and also miR-143 repression. Several ultra-structural changes have been observed following Cr (VI)-toxicity, including rough ER dilation, alteration in the mitochondrial membrane and nuclear membrane, pycnotic nuclei formation, and cytoplasm vacuolization. A significant change was observed in the metabolism of lipid, glucose, and the metabolism of protein after exposure to Cr. Cr-toxicity also leads to immune system dysregulations with changes seen in the expression of IL-8, IL-4, IgM, lymphocytes, and leukocytes among others. P53, as well as pro-and anti-apoptotic proteins, are involved in apoptosis. These Cr-induced damages can be alleviated via agents that restore antioxidant balance, regulate Nrf-2 levels, or increase anti-apoptotic proteins while decreasing pro-apoptotic proteins.

hexavalent chromium toxicityreactive oxygen speciesNrf2 signalingDNA methylation
مقالوصول مفتوح202274استشهاد· Semantic Scholar

Fabrication and Evaluation of Voriconazole Loaded Transethosomal Gel for Enhanced Antifungal and Antileishmanial Activity

Molecules · مجلد 27 (10) · 3347-3347

Voriconazole (VRC) is a broad-spectrum antifungal agent belonging to BCS class II (biopharmaceutical classification system). Despite many efforts to enhance its solubility, this primary issue still remains challenging for formulation scientists. Transethosomes (TELs) are one of the potential innovative nano-carriers for improving the solubility and permeation of poorly soluble and permeable drugs. We herein report voriconazole-loaded transethosomes (VRCT) fabricated by the cold method and followed by their incorporation into carbopol 940 as a gel. The prepared VRCT were evaluated for % yield, % entrapment efficiency (EE), surface morphology, possible chemical interaction, particle size, zeta potential, and polydispersity index (PDI). The optimized formulation had a particle size of 228.2 nm, a zeta potential of −26.5 mV, and a PDI of 0.45 with enhanced % EE. Rheology, spreadability, extrudability, in vitro release, skin permeation, molecular docking, antifungal, and antileishmanial activity were also assessed for VRCT and VRC loaded transethosomal gel (VTEG). Ex-vivo permeation using rat skin depicted a transdermal flux of 22.8 µg/cm2/h with enhanced efficiency up to 4-fold. A two-fold reduction in inhibitory as well as fungicidal concentration was observed against various fungal strains by VRCT and VTEG besides similar results against L-donovani. The development of transethosomal formulation can serve as an efficient drug delivery system through a topical route with enhanced efficacy and better patient compliance.

voriconazoletransethosomesantifungal activityantileishmanial activity
مقالوصول مفتوح202257استشهاد· Semantic Scholar

Enhancement of the Solubility and Bioavailability of Pitavastatin through a Self-Nanoemulsifying Drug Delivery System (SNEDDS)

Pharmaceutics · مجلد 14 (3) · 482-482

The purpose of the study was to develop an SNEDDS to improve the solubility and bioavailability of pitavastatin. The solubility of pitavastatin in different oils, surfactants, and co-surfactants was determined and a pseudo-ternary phase diagram was constructed. The SNEDDS was characterized by zeta-sizer, zeta-potential, FTIR, DSC, and TGA. Release and permeation of pitavastatin from the SNEDDS was studied for 12 and 24 h, respectively. The lipolysis test, RBC lysis, effect on lipid profile, and pharmacokinetics were studied. The SPC3 formulation showed a 104 ± 1.50 nm particle size, a 0.198 polydispersity index (PDI), and a –29 zeta potential. FTIR, DSC, and TGA showed the chemical compatibility and thermal stability. The release and permeation of pitavastatin from SPC3 was 88.5 ± 2.5% and 96%, respectively. In the lipolysis test, the digestion of SPC3 yielded a high amount of pitavastatin and showed little RBC lysis. The lipid profile suggested that after 35 days of administration of the SNEDDS, there was a marked decrease in TC, LDL, and triglyceride levels. The SNEDDS of SPC3 showed an 86% viability of Caco-2 cells. Pharmacokinetics of SPC3 showed improved values of Cmax, Tmax, half-life, MRT, AUC, and AUMC compared to the reference formulation. Our study demonstrated that the SNEDDS effectively enhanced the solubility and bioavailability of a BCS class II drug.

pitavastatinself-nanoemulsifying drug delivery systemsolubility enhancementbioavailability enhancement
مقالوصول مفتوح202222استشهاد· Semantic Scholar

In Vitro Physical Characterizations and Docking Studies on Carvedilol Nanocrystals

Crystals · مجلد 12 (7) · 988-988

The major goal of this investigation was to prepare carvedilol nanocrystals (CRL-NCs) for better solubility, stability, and bioavailability. Using polyvinyl pyrolidine K-30 (PVP) and sodium dodecyl sulphate (SDS) as stabilisers, CRL-NCs were effectively synthesised by emulsion-diffusion, followed by the high-pressure homogenization (HPH) method. The AL classes of phase solubility curves with ideal complexes produced with stabilisers were estimated by thermodynamic parameters. The docking study was performed with the active site of a β-1 adrenoreceptor protein, and the CRLs docking score was revealed as −23.481 Kcal/mol−1. At 25 and 37 °C, the optimum interaction constant was determined for PVP (144 and 176 M−1) and SDS (102 and 121 M−1). The average particle size (PS) of the produced stable CRL-NCs is 58 nm, with a zeta potential of −27.2 ± 2.29 mV, a poly dispersibility index of 0.181 ± 0.012, a percentage yield of 78.7 ± 3.41, drug content of 96.81 ± 3.64%, and entrapment efficiency of 83.61 ± 1.80%. The morphological data also reveals that the CRL-NCs were nearly sphere shaped, with distinct and smooth surfaces. CRL-NCs were studied using X-ray diffraction (XRD), fourier transform infrared (FT-IR) spectroscopy, and differential scanning calorimetry (DSC), and the results show no chemical structural alterations, even when PS was reduced. NCs accelerate their in vitro dissolution release rate by about three times faster than CRL-MCs (microcrystals). When kept at 4 °C, the CRL-NCs exhibit good physical stability for six months. As a result, the CRL-NCs created via emulsion-diffusion followed by HPH with stabilisers can be used to increase the solubility, stability, and bioavailability of poorly soluble or lipophilic drugs.

carvedilolnanocrystalshigh-pressure homogenizationpolyvinylpyrrolidone
مقالوصول مفتوح202219استشهاد· Semantic Scholar

Nanocrytals-Mediated Oral Drug Delivery: Enhanced Bioavailability of Amiodarone

Pharmaceutics · مجلد 14 (6) · 1300-1300

The aim of this study was to improve the saturation solubility, dissolution profile and oral bioavailability of amiodarone hydrochloride (AMH), a highly lipophilic drug. Stabilizer (Pluronic F-127)-coated AMH nanocrystals (AMH-NCs) were developed by a combination of antisolvent precipitation and homogenization techniques. The optimized formulation comprised pluronic F-127 and AMH at the concentration of 4% and 2% w/v, respectively. The particle size (PS), zeta potential (ZP) and polydispersity index (PDI) of the optimized formulation was found to be 221 ± 1.2 nm, 35.3 mV and 0.333, respectively. The optimized formulation exhibited a rough surface morphology with particles in colloidal dimensions and a significant reduction in crystallinity of the drug. AMH-NCs showed a marked increase in the saturation solubility as well as rapid dissolution rate when compared with the AMH and marketed product. The stability study displayed that the formulation was stable for 3 months, with no significant change in the PS, ZP and PDI. The in vivo pharmacokinetic study demonstrated the ability of AMH-NCs to significantly (p < 0.05) improve the oral bioavailability (2.1-fold) of AMH in comparison with AMH solution, indicating that the production of AMH-NCs using a combination of antisolvent precipitation and homogenization techniques could enhance the bioavailability of the drug.

amiodarone hydrochloridenanocrystalsoral bioavailabilityPluronic F127
مقالوصول مفتوح202215استشهاد· Semantic Scholar

Solubility and solution thermodynamics of raloxifene hydrochloride in various (DMSO + water) compositions

Alexandria Engineering Journal · مجلد 61 (11) · 9119-9128

The solubility of the poorly soluble drug raloxifene hydrochloride (3) in binary {dimethyl sulfoxide (DMSO) (1) + water (2)} mixtures have been recorded at several temperatures under atmospheric pressure. Four different computational models were applied to model the experimental solubility values of studied drug. Raloxifene hydrochloride mole fraction solubility was improved with higher temperature and DMSO mass fraction in {(DMSO) (1) + water (2)} compositions. Pure DMSO had the maximum mole fraction solubility of raloxifene hydrochloride (5.05 × 10–2 at 323.2 K), while pure water had the lowest (1.051 × 10–5 at 298.2 K). The “van't Hoff, Yalkowsky-Roseman, Jouyban-Acree, and Jouyban-Acree-van't Hoff models” had mean percent deviations of 5.13%, 11.96%, 1.14%, and 1.37%, showing excellent correlations. According to the results of apparent thermodynamic analyses, the dissolution of studied drug was “endothermic and entropy-driven” in all {(DMSO) (1) + water (2)} mixtures studied. The main mechanism for raloxifene hydrochloride solvation in {(DMSO) (1) + water (2)} mixtures was uncovered as an enthalpy-driven process. In comparison to raloxifene hydrochloride-water, raloxifene hydrochloride-DMSO produced the most molecular interactions. Finally, these results showed that DMSO has a lot of potential for solubilizing a poorly soluble raloxifene hydrochloride in water.

raloxifene hydrochloridesolubilitysolution thermodynamicsdimethyl sulfoxide
مقالمفتوح (مستودع)202211استشهاد· Semantic Scholar

Development of Atorvastatin Calcium Biloaded Capsules for Oral Administration of Hypercholesterolemia

Evidence-based Complementary and Alternative Medicine · مجلد 2022 · 1-11

The goal of this study was to develop atorvastatin (ATN) calcium biloaded, i.e., immediate release (IR) and sustained release (SR) capsules that would promote the quick onset of action and a better dissolution profile on both the IR and SR aspects. The IR granules were prepared by the wet granulation method, and an aqueous solubility study proved that the IR granules released the ATN within 25 min compared to the pure drug due to the addition of PEG and super disintegrants such as croscarmellose (CC) and crospovidone (CP). The sustained release nanoparticles (SR-NPs) were synthesized using a solvent evaporation technique and an optimal combination of hydrophilic and hydrophobic polymers. The addition of a hydrophobic polymer to a hydrophilic polymer delays drug release, resulting in a sustained and controlled release lasting up to 12 hours. The drug release of ATN from SR nanoparticles followed the Higuchi and Korsmeyer–Peppas models and had first-order kinetics (r2 = ???). Fourier transform infrared spectrophotometry, powder X-ray diffraction, and differential scanning calorimetric analysis were used to test the prepared biloaded capsules, and the results showed that there was no significant interaction between the polymers, excipients, and drug. The SEM and DLS analysis clearly demonstrated that drug particles in a continuous layer were enclosed by polymers at the nanoscale. To summarise, integrating both layers into a single capsule resulted in a superior release profile and patient compliance. Finally, prepared biloaded capsules were discovered to exhibit both an IR and an SR profile.

atorvastatin calciumimmediate releasesustained drug releasehypercholesterolemia
مقالمفتوح (مستودع)20228استشهاد· Semantic Scholar

[Retracted] Ameliorated Stomach Specific Floating Microspheres for Emerging Health Pathologies Using Polymeric Konjac Glucomannan‐Based Domperidone

BioMed Research International · مجلد 2022 (1) · 3670946-3670946

The goal of this study was to use polymeric konjac glucomannan (KGM), Kollidon VA 64 (KVA64), and glutaraldehyde to ameliorate stomach specific floating microspheres (SSFM) using domperidone (DoN) to increase in vivo bioavailability and emerging health pathologies. The SSFM were made using the emulsion cross‐linking process, and the polymer was chosen based on its ability to get cross‐linked. The thermodynamic parameters were used to determine the A L classes of phase solubility curves using ideal complexes produced with KVA64. The optimal interaction constants at 25 and 37°C were found to be 116.14 and 128.05 M -1 , respectively. The prepared SSFM had an average particle size (PS) of 163.71 ± 2.26 mm and a drug content of 96.66 ± 0.32%. It can be determined from in vitro drug release experiments that drug release is good in terms of regulated drug release after 12 h (92.62 ± 2.43%). The SSFMs were approximately sphere‐shaped and had smooth surfaces, according to the morphological data. SSFMs were investigated using Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), and differential scanning calorimetry (DSC), and no chemical structural changes were identified. The SSFMs produces a considerable gastric residence time with optimal DoN release and absorption in stomach fluid, and the mean residence time (17.36 ± 1.4 h) and t 1/2 (10.47 ± 0.6 h) were considerably longer ( p < 0.05) than those obtained following i.v. treatment (MRT = 8.42 ± 1.2 h; t 1/2 = 9.07 ± 0.7 h). The SSFMs maintained good physical stability for three months when stored at room temperature.

konjac glucomannandomperidoneKollidon VA64glutaraldehyde crosslinking
مقالوصول مفتوح20226استشهاد· Semantic Scholar

Aromatic Polyesters Containing Ether and a Kinked Aromatic Amide Structure in the Main Chain: Synthesis and Characterisation

Coatings · مجلد 12 (2) · 181-181

A novel bisphenol containing preformed multiple ether and amide linkages, N, N′-Bis (4-hydroxyphenoxyphenylene) isophthalamide (IPCD), was prepared and analysed by spectroscopic methods. New aromatic polyesters were prepared by polycondensation of IPCD with 1, 3-benzene diacidchloride and/or 1, 4-benzene diacidchloride. These obtained polyesters were structurally analysed by infra-red spectroscopy, measurements of inherent viscosity, wide-angle X-ray diffraction patterns, and thermal techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and solubility tests in organic solvents. The synthesised polyesters had high molecular weights, as indicated by their inherent viscosities from 0.67 to 0.78 dL/g in N-methyl-2-pyrrolidone. The incorporation of ether and kinked aromatic amide moieties in the main polyester chains greatly affected the properties of these aromatic polyesters. The prepared polyesters readily dissolved in amide-type polar aprotic solvents and pyridine, indicating their solution processability. The DSC curves above the polyesters showed glass transition temperatures of 194 to 269 °C. TGA indicated that these newly obtained polyesters were stable up to 301 °C and retained a 39 to 48% weight at 900 °C. W-XRD analyses showed that the newly synthesised polyesters were amorphous, which is reflected in their solubility behaviour.

aromatic polyestersether linkageisophthalic acid1,3-benzenedicarboxylic acid
مقالمفتوح (مستودع)20224استشهاد· Semantic Scholar

Solubility of tadalafil in aqueous mixtures of Transcutol® and PEG 400 revisited: correlation, thermodynamics and preferential solvation

Physics and Chemistry of Liquids · مجلد 60 (5) · 750-766

Mole fraction solubilities of tadalafil (3) in aqueous mixtures of Transcutol® and PEG 400 at temperatures from 298.15 to 333.15 K were analysed following Hildebrand solubility parameters. Cosolvency models for representing tadalafil solubility at various temperatures were also provided for correlation/prediction purposes. Apparent thermodynamic quantities for tadalafil dissolution processes were calculated based on van’t Hoff and Gibbs equations. Non-linear enthalpy–entropy compensation was observed for tadalafil transfer from more polar to less polar solvent systems. Preferential solvation parameters of tadalafil at 298.15 and 313.15 K were determined by means of the inverse Kirkwood-Buff integrals (IKBI). Tadalafil is preferentially solvated by water in water-rich mixtures of Transcutol® but preferentially solvated by Transcutol® in mixtures of 0.12 < x1 < 1.00. In the former case, this result could be due to hydrophobic hydration around the non-polar moieties of tadalafil. Otherwise, tadalafil is preferentially solvated by PEG 400 in all the aqueous mixtures.

tadalafilTranscutolpolyethylene glycol 400solubility