Environmental problems are intensifying due to the rapid growth of the population, industry, and urban infrastructure. This expansion has resulted in increased air and water pollution, intensified urban heat island effects, a... | Find, read and cite all the research you need on Tech Science Press
Case Studies in Thermal Engineering · مجلد 75 · 107084-107084
This study focuses on waste energy recovery and environmental protection through the evaluation of an integrated clean energy system combining compressed air energy storage, a solid oxide fuel cell, and a heat recovery unit. Designed to sustainably generate power, heat, and compressed air, the system's performance is assessed from energy, exergy, and environmental perspectives. Results show that recovering waste energy by optimizing current density significantly boosts outputs, power increases from 95.46 kW to 165.8 kW, heat recovery improves from 195.6 kW to 483 kW, and compressed air generation rises from 278.8 g/s to 535.6 g/s. However, higher current density also raises electrical emissions (from 850 to 1142 kg/MWh) and cycle emissions (from 278.8 to 291.8 kg/MWh), despite a reduction in thermal emissions (from 414.9 to 392 kg/MWh), underscoring the environmental trade-offs involved. The system demonstrated energy efficiencies ranging from 60.31% to 63.85% and exergy efficiencies between 27.5% and 32.87%, depending on operating conditions. Furthermore, elevated temperatures and utilization rates negatively affect both energy and exergy efficiencies, with improved efficiencies observed at lower current densities and temperatures. These insights emphasize the importance of balancing operational parameters to maximize waste energy recovery while minimizing environmental impacts, contributing to the advancement of sustainable and efficient hybrid clean energy technologies.
waste heat recoverycompressed air energy storagesolid oxide fuel cellsheat recovery units
Medical Engineering & Physics · مجلد 146 (1) · 104438-104438
AIM: This study investigates the characterization of a calcium hydroxide-filled SPRG (Surface Pre-Reacted Glass Ionomer) restorative material. The analysis focuses on the material's microstructure and antimicrobial properties, specifically its efficacy against Streptococcus mutans, a common oral bacterium. Using Scanning Electron Microscopy (SEM) and confocal microscopy, we examine the material's surface morphology, microbial adherence, and ion leaching capabilities. The goal is to assess the material's suitability for deep caries management and its potential as a dentine replacement. METHODS AND MATERIALS: Discs of Calcium Hydroxide filled SPRG Restorative Material were prepared (10 mm x 2 mm). SEM was employed to observe the surface morphology and microstructural characteristics of the material. To evaluate microbial adherence and count, confocal microscopy was used with Streptococcus mutans cultured on the material. The leaching of calcium and fluoride ions was quantified using the Ion Selective Electrode (ISE) method. RESULTS: The results showed significant leaching of calcium and fluoride ions, indicating the material's potential for ion release. SEM analysis provided detailed insights into the microstructure of the SPRG restorative material, while confocal microscopy revealed a clear distinction between live and dead Streptococcus mutans colonies, suggesting that the fluoride and calcium ion leaching contributed to effective antimicrobial properties. CONCLUSION: Calcium hydroxide-filled SPRG restorative materials show promise for dental applications, with ion release and effective antimicrobial properties making them strong candidates for managing deep caries and potentially replacing dentine. Ongoing research could optimize these materials for clinical use, advancing restorative dentistry.
KSII Transactions on Internet and Information Systems · مجلد 19 (10)
Human-Computer Interaction for autonomous communication systems is traditionally developed through the stages of the usability engineering paradigm.However, a major challenge within this paradigm is synchronizing evolving user needs with the dynamic interaction environment.To address this gap, this article proposes the Relativity Turner Training Algorithm (RTTA).The algorithm estimates the relativity measure between the user's interaction context and the actual requirements, allowing the system to adapt more effectively over time.Unlike rule-based techniques, the RTTA leverages machine learning to identify contextual adjustment trends and optimize requirement matching, drawing on past interaction data.The relativity factor is derived from users' previous interaction responses.When relativity is low, the algorithm anticipates potential context changes.The "Turner" component then evaluates whether these changes can yield higher relativity-that is, a closer alignment between the new context and the user's requirements.If such alignment is achieved, interaction quality improves, and the need for further adjustments decreases.In this way, the algorithm dynamically balances relativity (measuring context-requirement alignment) and Asma Aledrees et al.: Enhancing Human-Computer Interaction Context Awareness through the Relativity Turner Training Algorithm Turner (guiding beneficial context shifts) across both short-and long-term interaction intervals.To advance research in adaptive HCI systems, the proposed RTTA framework provides a robust foundation by enabling the seamless integration of advanced machine learning techniques with multimodal interaction methods.
Serbian Journal of Electrical Engineering · مجلد 22 (2) · 223-241
The Internet of Things (IoT) is now present in every aspect of our daily lives because of its ability to offer remote services. Unfortunately, the insecure transmission of user data in open channels caused by this significant use of IoT networks makes it vulnerable to malicious use. Hence, the security of the user?s data is now a serious matter in an IoT environment. Since authentication may prevent hackers from recovering and using data transmitted between IoT devices, researchers have proposed many lightweight IoT authentication protocols over the past decades. Many of these protocols are built around two authentication factors. They cannot guarantee unlinkability and perfect forward secrecy, as well as withstand well-known attacks such as node capture, DOS attack, stolen verifier, Denning-Sacco attack, and GWN bypass. This paper proposes an Elliptic Curve Cryptography (ECC) -based authentication protocol that is anonymous and exploits three authentication factors to ensure all security services and withstand well-known attacks. Our provided protocol is secure and can resist known attacks, as demonstrated by both informal security analysis and formal security proof using ProVerif. Lastly, our protocol and other protocols are compared in terms of computational costs, communication costs, and security features.
Preclinical and clinical studies have demonstrated that precision therapy has a broad variety of treatment applications, making it an interesting research topic with exciting potential in numerous sectors. However, major obstacles, such as inefficient and unsafe delivery systems and severe side effects, have impeded the widespread use of precision medicine. The purpose of drug delivery systems (DDSs) is to regulate the time and place of drug release and action. They aid in enhancing the equilibrium between medicinal efficacy on target and hazardous side effects off target. One promising approach is biomaterial-assisted biotherapy, which takes advantage of biomaterials' special capabilities, such as high biocompatibility and bioactive characteristics. When administered via different routes, drug molecules deal with biological barriers; DDSs help them overcome these hurdles. With their adaptable features and ample packing capacity, biomaterial-based delivery systems allow for the targeted, localised, and prolonged release of medications. Additionally, they are being investigated more and more for the purpose of controlling the interface between the host tissue and implanted biomedical materials. This review discusses innovative nanoparticle designs for precision and non-personalised applications to improve precision therapies. We prioritised nanoparticle design trends that address heterogeneous delivery barriers, because we believe intelligent nanoparticle design can improve patient outcomes by enabling precision designs and improving general delivery efficacy. We additionally reviewed the most recent literature on biomaterials used in biotherapy and vaccine development, covering drug delivery, stem cell therapy, gene therapy, and other similar fields; we have also addressed the difficulties and future potential of biomaterial-assisted biotherapies.
Smart grid represents an advanced and interconnected system that incorporates modern technologies to enhance efficiency, reliability and sustainability. In comparison to the conventional grid, the smart grid (SG) uses many cutting-edge technologies. This research introduces a fog computing encryption-based model for privacy preservation in the smart grid model. By using different advanced technologies, our model addresses the balance between privacy, security, effectiveness and functionality. The model facilitates efficient communication and function inquiry while mitigating challenges posed by massive Internet of Things (IoT) systems in the smart grid environment. Specifically, it tackles the secure data consolidation challenge by employing encryption-based techniques for transmitting private data from smart meters to fog devices. These devices consolidate the data before updating to cloud. Conventional data consolidation approaches for SGs have high computation and communication costs and suffer from high storage requirement. The proposed model resolves these issues; algorithms for data consolidation and extraction of data at fog device and cloud respectively to obtain the secure communication has also been included. The performance of the developed mechanism has been computed against existing data consolidation mechanisms GCEDA (Grouping of Clusters for Efficient Data Aggregation), SPPDA (Secure Privacy-Preserving Data Aggregation) and LPDA (Lightweight Privacy-preserving Data Aggregation) for numerous performance parameters. And the results proves that the performance of developed mechanism with respect to bytes of storage, communication cost and ratio of transmission is better than the existing ones.
smart gridInternet of Thingsfog computingdata encryption
Frontiers in Bioengineering and Biotechnology · مجلد 12 · 1384326-1384326
Periodontitis is an inflammation-related condition, caused by an infectious microbiome and host defense that causes damage to periodontium. The natural processes of the mouth, like saliva production and eating, significantly diminish therapeutic medication residency in the region of periodontal disease. Furthermore, the complexity and diversity of pathological mechanisms make successful periodontitis treatment challenging. As a result, developing enhanced local drug delivery technologies and logical therapy procedures provides the foundation for effective periodontitis treatment. Being biocompatible, biodegradable, and easily administered to the periodontal tissues, hydrogels have sparked substantial an intense curiosity in the discipline of periodontal therapy. The primary objective of hydrogel research has changed in recent years to intelligent thermosensitive hydrogels, that involve local adjustable sol-gel transformations and regulate medication release in reaction to temperature, we present a thorough introduction to the creation and efficient construction of new intelligent thermosensitive hydrogels for periodontal regeneration. We also address cutting-edge smart hydrogel treatment options based on periodontitis pathophysiology. Furthermore, the problems and prospective study objectives are reviewed, with a focus on establishing effective hydrogel delivery methods and prospective clinical applications.
Traffic management is a critical activity, the population is increasing day by day and so the traffic on the road is also increasing. Traffic jams and long waiting queues of vehicles at the road crossing are now part of everyone's life. The traffic lights used at the crossing to regulate the traffic play a vital role in the smooth functioning of traffic movement. At a crossing of four roads, it has been observed that giving an equal amount of green light to all roads is meaningless since the arrival of traffic on different paths is different. Importantly, the arrival rate is responsible for all traffic jams, long queues, and increased waiting time. Therefore, this paper suggests a green light allocation scheme for all paths i depending on the arrival rate of the vehicles. Thus, the allocation of green light will be dynamic. Further, weight is also computed, where more arrival rate means more weight, thereby assigning more time to the green signal. This will help in reducing the long queue length, residual traffic, and long waiting times. On simulating the traffic with the traffic data, the proposed optimized green light allocation scheme to path i reduces the residue traffic to negligible, allowing smooth traffic flow even during peak hours. The work also provides a proficient optimization of the waiting time of vehicles accumulated during the red light. According to the simulation, the maximum time assigned for the green signal during the peak hour of 9:30 AM to 10:00 AM for paths i, where 1≤i≤4 is 39.96, 33.36, 26.64, and 20.04 seconds respectively. Similarly, during the second rush hour of 5:00 PM to 6:00 PM, the simulation assigns a green signal time of 41.4, 37.2, 24.84, and 16.56 seconds for corresponding paths 1–4. Thus, the proposed work suggests an effective traffic management scheme at the four-road crossing.
traffic signal controlroad crossingvehicle waiting timetraffic congestion
Case Studies in Thermal Engineering · مجلد 58 · 104359-104359
The intriguing thermophysical properties of nanoparticles have considerable potential in thermal transportation for engineering applications. The inclusion of solid nanoparticles in the base fluid raises the fluid's thermal conductivity, which improves thermal transfer characteristics. Thus, an analysis is performed by assuming the Tiwari and Das model, for the flow and energy transportation aspects of hybrid nanoparticles in a shrinkable porous medium. The current study focuses on the thermal heat transfer performance on the dynamic of ethylene glycol-based titania and alumina nanoparticles. The flow-controlling system of PDEs is transformed into a system of non-linear ODEs by using similarity transformations, and the resulting equations are then solved numerically through the solver bvp4c in Matlab function with a limit of tolerance . The multiple branches of solutions are noted for distinct values of suction and shrinking parameters. The outcomes reveal that the inclusion of titania and alumina nanocomposites improves the thermophysical properties of the base fluid significantly. The findings indicate that hybrid nanofluids are more effective for increasing the thermal transport rate. Further, in the upper branch solution, the friction drags, and energy transportation rate raises for the higher influence of suction strength while it declines for the lower branch.
hybrid nanofluidheat generation and absorptionTiwari-Das modeltitanium dioxide nanoparticles
Frontiers in Bioengineering and Biotechnology · مجلد 12 · 1454247-1454247
Ionic liquids (ILs) represent an exciting and promising solution for advancing drug delivery platforms. Their unique properties, including broad chemical diversity, adaptable structures, and exceptional thermal stability, make them ideal candidates for overcoming challenges in transdermal drug delivery. Despite encountering obstacles such as side reactions, impurity effects, biocompatibility concerns, and stability issues, ILs offer substantial potential in enhancing drug solubility, navigating physiological barriers, and improving particle stability. To propel the use of IL-based drug delivery in pharmaceutical innovation, it is imperative to devise new strategies and solvents that can amplify drug effectiveness, facilitate drug delivery to cells at the molecular level, and ensure compatibility with the human body. This review introduces innovative methods to effectively address the challenges associated with transdermal drug delivery, presenting progressive approaches to significantly improve the efficacy of this drug delivery system.
ionic liquidstransdermal drug deliveryskin permeationdrug solubility enhancement
Nano carriers have gained more attention for their possible medical and technological applications. Tailored nanomaterials can transport medications efficiently to targeted areas and allow for sustained medication discharge, reducing undesirable toxicities while boosting curative effectiveness. Nonetheless, transitioning nanomedicines from experimental to therapeutic applications has proven difficult, so different pharmaceutical incorporation approaches in nano scaffolds are discussed. Then numerous types of nanobiomaterials implemented as carriers and their manufacturing techniques are explored. This article is also supported by various applications of nanobiomaterials in the biomedical field. • Nano-inspired platforms have the potential to revolutionize drug delivery and tissue engineering. • These platforms offer advantages such as targeted drug delivery, improved bioavailability, and enhanced tissue regeneration. • Strategies for drug release from these platforms include diffusion, degradation, and stimuli-responsive release. • Nano-inspired platforms in tissue engineering: 3D scaffolds and magnetic nanoparticles for hyperthermia • Future advancements: Nanorobots for precise drug delivery and smart materials for tissue engineering.
Frontiers in Computational Neuroscience · مجلد 18 · 1489463-1489463
Autism spectrum disorder (ASD) is a neurodevelopmental condition marked by notable challenges in cognitive function, understanding language, recognizing objects, interacting with others, and communicating effectively. Its origins are mainly genetic, and identifying it early and intervening promptly can reduce the necessity for extensive medical treatments and lengthy diagnostic procedures for those impacted by ASD. This research is designed with two types of experimentation for ASD analysis. In the first set of experiments, authors utilized three feature engineering techniques (Chi-square, backward feature elimination, and PCA) with multiple machine learning models for autism presence prediction in toddlers. The proposed XGBoost 2.0 obtained 99% accuracy, F1 score, and recall with 98% precision with chi-square significant features. In the second scenario, main focus shifts to identifying tailored educational methods for children with ASD through the assessment of their behavioral, verbal, and physical responses. Again, the proposed approach performs well with 99% accuracy, F1 score, recall, and precision. In this research, cross-validation technique is also implemented to check the stability of the proposed model along with the comparison of previously published research works to show the significance of the proposed model. This study aims to develop personalized educational strategies for individuals with ASD using machine learning techniques to meet their specific needs better.
The Internet of Things (IoT) is essential in several Internet application areas and remains a key technology for communication technologies. Shorter delays in transmission between Roadside Units (RSUs) and vehicles, road safety, and smooth traffic flow are the major difficulties of Intelligent Transportation System (ITS). Machine Learning (ML) was an advanced technique to find hidden insights into ITSs. This article introduces an Improved Arithmetic Optimization with Deep Learning Driven Traffic Congestion Control (IAOADL-TCC) for ITS in Smart Cities. The presented IAOADL-TCC model enables traffic data collection and route traffic on existing routes for avoiding traffic congestion in smart cities. The IAOADL-TCC algorithm exploits a hybrid convolution neural network attention long short-term memory (HCNN-ALSTM) method for traffic congestion control. In addition, an IAOA-based hyperparameter tuning strategy is derived to optimally modify the parameters of the HCNN-ALSTM model. The presented IAOADL-TCC model effectively enhances the flow of traffic and reduces congestion. The experimental validation was performed using the road traffic dataset from the Kaggle repository. The proposed model obtained an average accuracy of 98.03 % with an error rate of 1.97 %. The experimental analysis stated the superior performance of the IAOADL-TCC approach over other DL methods.
traffic congestion controlInternet of Thingsintelligent transportation systemsarithmetic optimization