Thermodynamic cycle models are routinely assembled from heterogeneous sources – steam-table lookups, manufacturer data sheets, handbook correlations, and hand-computed preliminary estimates – and an error introduced in any one source (a misread enthalpy, a sign error in a heat balance, a wrong coefficient-of-performance value) can propagate silently through every downstream calculation. Engineers currently guard against this by checking governing equations pairwise, but pairwise checking has a structural blind spot: a set of equations can pass every pairwise comparison and still be globally infeasible as a system. We develop a linear-algebraic diagnostic framework that closes this gap. The governing equations of a steady-state thermodynamic cycle – energy balances over turbines, compressors, boilers, condensers, and expansion devices, together with isentropic-process relations and the coefficient-of-performance definition – form a linear system A x = b whose state vector x collects enthalpies, heat transfer rates, and work quantities at each process node. We show that global inconsistency of this system is equivalent to infeasibility of A x = b , and that infeasibility is always witnessed by a vector in the left nullspace of A that is not orthogonal to b – an algebraically certifiable condition we call a nullspace inconsistency certificate , computable from a single thin SVD and fundamentally inaccessible to pairwise checking. Building on this certificate, we prove that pairwise consistency checks are provably insufficient to detect global thermodynamic inconsistency; we establish existence and uniqueness of a minimum-norm repair vector that returns the right-hand-side data to the nearest feasible point on the constraint manifold; we derive equation-localization weights that rank which governing equation is the primary source of a fault; and we construct a differentiable repair operator whose fixed points correspond to globally self-consistent cycle models. The complete detection-localization-repair pipeline runs in O ( kn 2 ) time via a thin SVD – negligible overhead for cycle models of practical size – and requires no information beyond the equations and data an engineer already has on hand. We demonstrate the framework on the Rankine steam-power cycle and the vapor-compression refrigeration cycle, where it correctly detects, localizes, and corrects hidden inconsistencies – including a 50 kJ kg − 1 enthalpy error in Rankine cycle steam tables and a simultaneous condenser-balance fault with an erroneous COP value in the refrigeration cycle – that pass all pairwise equation checks yet render the global model infeasible. We further discuss how the certificate behaves under measurement and property-estimation uncertainty, and compare the approach against residual-based checking, data-reconciliation, and optimization-based fault detection. The framework requires only the linear (or linearized) governing equations and standard property data already used in routine cycle calculations, making it directly deployable as an auditing layer in existing engineering workflows.
Case Studies in Thermal Engineering · مجلد 76 · 107397-107397
This work provides a detailed evaluation of a novel biomass-fueled multigeneration system, conceived to contribute to the growing emphasis on sustainable energy solutions. The architecture comprises a biomass gasifier, an innovative cascaded organic Rankine cycle (CORC) incorporating a high-temperature mixture in the top cycle, a proton exchange membrane electrolyzer (PEME), a Brayton cycle, and waste heat utilization units, all operating together to deliver electricity, hydrogen (H 2 ), and thermal output. A comprehensive thermodynamic modeling framework is established to evaluate the system’s performance across various operational scenarios. The framework emphasizes critical metrics, including exergy efficiency, levelized total emissions (LTE), and payback period (PP). These indicators ensure a holistic assessment of energy, exergy, economic, and environmental considerations. Parametric studies demonstrate that enhancements in biomass mass flow rate and combustion chamber temperature significantly increase power output and H 2 production while reducing the payback period, underscoring the system’s flexibility and economic feasibility. Furthermore, the study employs sophisticated machine learning optimization methods, combining artificial neural networks (ANNs) with genetic algorithms (GA), to determine optimal operating conditions with minimal computational effort and maximum efficiency. When evaluated at nominal parameters, the system records an exergy efficiency of 23.72%, achieves a PP of 5.61 years, and yields an LTE value of 0.34 ton/GJ. However, under optimized conditions, these values improve to 35.01%, 3.78 years, and 0.241 ton/GJ, respectively.
Case Studies in Thermal Engineering · مجلد 75 · 107084-107084
This study focuses on waste energy recovery and environmental protection through the evaluation of an integrated clean energy system combining compressed air energy storage, a solid oxide fuel cell, and a heat recovery unit. Designed to sustainably generate power, heat, and compressed air, the system's performance is assessed from energy, exergy, and environmental perspectives. Results show that recovering waste energy by optimizing current density significantly boosts outputs, power increases from 95.46 kW to 165.8 kW, heat recovery improves from 195.6 kW to 483 kW, and compressed air generation rises from 278.8 g/s to 535.6 g/s. However, higher current density also raises electrical emissions (from 850 to 1142 kg/MWh) and cycle emissions (from 278.8 to 291.8 kg/MWh), despite a reduction in thermal emissions (from 414.9 to 392 kg/MWh), underscoring the environmental trade-offs involved. The system demonstrated energy efficiencies ranging from 60.31% to 63.85% and exergy efficiencies between 27.5% and 32.87%, depending on operating conditions. Furthermore, elevated temperatures and utilization rates negatively affect both energy and exergy efficiencies, with improved efficiencies observed at lower current densities and temperatures. These insights emphasize the importance of balancing operational parameters to maximize waste energy recovery while minimizing environmental impacts, contributing to the advancement of sustainable and efficient hybrid clean energy technologies.
waste heat recoverycompressed air energy storagesolid oxide fuel cellsheat recovery units
Case Studies in Thermal Engineering · مجلد 63 · 105267-105267
The proposed system uses a dual-loop organic Rankine cycle, a reverse osmosis desalination unit, an absorption cooling unit, and a thermoelectric generator to produce electricity and freshwater for urban areas. A thorough assessment of the system's thermodynamic and economic performance has been conducted, with a parameter-based investigation to assess the effect of key variables on the system performance. The parametric study indicates that rising the geothermal mass flow rate enhances the energy efficiency, but lowers the energy efficiency and affects the cooling requirements. Moreover, the optimum inlet temperature in turbine 1 increases the desalination efficiency up to 105.02 kg/s at 115 °C, and higher temperatures reduce the performance and system efficiency. Adjusting the temperature difference at the pinch point at Evaporator1 is crucial for system efficiency, with trade-offs between freshwater output, expenses, and exergy efficiency. The capability of the system to produce up to 6,048,000 L of potable water daily signifies a monumental leap towards meeting the water demands of nearly 42,000 individuals, based on European consumption standards. Lastly, the application of genetic algorithms in the optimization process results in an exergetic efficiency of 32.79 % and a cost rate of 58.05 $/h, demonstrating the system's enhanced operational effectiveness.
Case Studies in Thermal Engineering · مجلد 63 · 105210-105210
This study offers an in-depth thermodynamic analysis and optimization of an integrated renewable energy system that merges a double-flash geothermal system with a transcritical carbon dioxide Rankine cycle, utilizing machine learning algorithms. The innovative design aims to maximize the concurrent generation of heat and electricity, ultimately benefiting environmental sustainability and energy security. By employing regression machine learning algorithms, the research evaluates and enhances system performance, achieving remarkable R-squared accuracy levels of 98.86 % for heating output and 99.89 % for power output predictions. The thermodynamic modeling, which has been validated against recognized benchmarks, confirms the accuracy of the system's design. Optimization findings indicate that operating pressures between 840 and 870 kPa and pressure ratios of 1.56–1.60 deliver optimal outputs, with power production between 2582 and 2585 kW and heating output ranging from 12260 to 12280 kW. The system reaches its maximum performance at a pressure of 850 kPa and a pressure ratio of 1.57, resulting in a power output of 2583.97 kW and a heating output of 12279.3 kW. These results highlight the potential of combining advanced thermodynamic systems with machine learning methodologies to improve the efficiency and effectiveness of renewable energy sources.
heat recoverycombined heat and powermachine learning optimizationoperating pressure optimization
Case Studies in Thermal Engineering · مجلد 55 · 104170-104170
The proposed system is designed to address the growing demand for sustainable and efficient energy solutions that can minimize greenhouse gas emissions while meeting the increasing energy needs of a modern world. The integrated approach of the system allows it to produce not only electricity but also hydrogen and fresh water from seawater, making it a comprehensive solution to multiple challenges. The system comprises several components that work together including a gas turbine unit, Rankine and organic Rankine cycles, a multi-effect desalination (MED) system, and a proton exchange membrane (PEM) electrolyzer. One significant characteristic of this system is its ability to generate hydrogen, which is later combined with the inlet fuel of the gas turbine. This novel methodology presents a more environmentally friendly fuel alternative, showcasing its potential to enhance combustion efficiency in a sustainable manner. To ensure the viability and feasibility of the system, a MATLAB function was utilized for calculating the base case scenario, followed by a GA optimization technique with the aid of a machine learning model to minimize run-time. In the given scenario, the total cost rate is measured at 3726 $/h, with an exergy efficiency of 54% and a normalized CO2 emission of 305 kg/GJ. Following the optimization process, significant enhancements can be observed. The cost rate decreases by 2202 $/h, the exergy efficiency improves from 54% to 55.61%, and the annual CO2 emissions decrease from 133,760 metric tons to 50,320 metric tons. Moreover, the implementation of blended fuel leads to a 10% decrease in normalized CO2 emissions.
Case Studies in Thermal Engineering · مجلد 56 · 104240-104240
Marine transportation is a significant contributor to overall energy consumption among transportation sectors and is responsible for producing a considerable amount of greenhouse gases. A potential solution for alternative applications involves implementing combined heat integration, thereby enabling the production of additional utilities and mitigating emissions. The current work introduces an innovative heat integration process for a marine engine, focusing on implementing an optimal thermal matching technique to minimize overall irreversibility in producing liquefied hydrogen and coolant. The process incorporates an organic flash-bi-evaporator cooling cycle, a humidification dehumidification desalination, a polymer electrolyte membrane water electrolysis process, and a Claude cycle. The generated freshwater is delivered to the electrolyzer to produce gaseous hydrogen. This product and the cooling for freezing are utilized in the Claude cycle for hydrogen liquefaction. The study utilizes an advanced thermo-environmental multi-criteria investigation and optimization, considering sensitivity analysis and optimization based on artificial intelligence method. The optimization process incorporates the training and testing of artificial neural networks, NSGA-II method, and TOPSIS decision-making. The primary objective functions include exergetic efficiency and carbon dioxide emission. The findings demonstrate that the specified objectives are computed to be 0.121 and 2.67 kg/MWh, correspondingly. Besides, this condition exhibits a liquefied hydrogen flow rate of 6.44 L/h and a cooling output of 43.61 kW, showing an energy efficiency of 0.1145. Also, the total exergy destruction rate associated with the arranged structure is 124.5 kW. Furthermore, the optimum state reveals an exergoenvironmental index of 0.840 and an exergetic stability factor of 0.869.
The exponential increase in the dependence on electrical power by rapid industrialization and increasing population has given rise to the need of supplying electric power efficiently and with good power quality (PQ). The evolution of renewable energy sources and their increased penetration into traditional grid systems has increased the complexity of electric power transmission and distribution. The significant increase in the use of complex converters, Flexible AC Transmission System devices and complex nonlinear loads in modern power systems have amplified the issues associated with the production and distribution of electricity having proper PQ. The proper functioning of the power system network requires healthy quality of power, maintained both at the load and source end. The Dynamic Voltage Restorer is a prospective D-FACTS (Distribution Flexible AC Transmission System) device that has been widely incorporated for addressing the PQ issues caused by irregularities in the distribution grid's voltage, current, or frequency. This research article attempts to enhance PQ indices of Photovoltaic, Fuel Cell, DVR and energy storage (battery) based Microgrid systems through a proposed Scaled Conjugate based Artificial Neural Network (SC-ANN) in the Matlab/Simulink architecture. The suggested technique’s effectiveness is verified by introducing severe PQ faults such as sag and swell and numerous power system responses have been comprehensively studied by comparing them with traditional Fuzzy Logic Controller and Proportional Integral controllers. The results obtained validates the efficiency of the proposed controller over FLC and PI methods in maintaining the system power indices constant during the onset of PQ faults by reducing harmonics and oscillations thereby enhancing the overall system reliability, efficiency and stability paving its way for real-time implementation in the areas of MG system.
power qualitygrid-connected microgriddynamic voltage restorerscaled conjugate gradient
By using the chemical bath deposition approach, binary bismuth sulphides (Bi2S3) and chromium-doped ternary bismuth sulphides (Bi2−xCrxS3) thin films were effectively produced, and their potential for photovoltaic applications was examined. Structural elucidation revealed that Bi2S3 deposited by this simple and cost-effective method retained its orthorhombic crystal lattice by doping up to 3 at.%. The morphological analysis confirmed the crack-free deposition, hence making them suitable for solar cell applications. Optical analysis showed that deposited thin films have a bandgap in the range of 1.30 to 1.17 eV, values of refractive index (n) from 2.9 to 1.3, and an extinction coefficient (k) from 1.03 to 0.3. From the Hall measurements, it followed that the dominant carriers in all doped and undoped samples are electrons, and the carrier density in doped samples is almost two orders of magnitude larger than in Bi2S3. Hence, this suggests that doping is an effective tool to improve the optoelectronic behavior of Bi2S3 thin films by engineering the compositional, structural, and morphological properties.