IEEE Transactions on Intelligent Transportation Systems · مجلد 26 (10) · 17601-17611
With the rapid evolution toward data-intensive applications and sustainable urban mobility, upcoming sixth-generation (6G) wireless networks must deliver enhanced coverage, high spectral efficiency, and energy optimization across densely populated areas. However, achieving these requirements poses significant challenges due to the dynamic nature of urban environments, high interference in multi-cell systems, and limitations in conventional passive beamforming technologies. To address these challenges, reconfigurable intelligent surface (RIS) is considered a highly promising approach for enabling and improving 6G wireless communications. This is because it has the ability to efficiently manipulate wireless channels at a lower cost. Considerable study has focused on the utilization of conventional diagonal RIS, in which each individual RIS component is linked to its own ground load but not interconnected with other elements. Nevertheless, the uncomplicated structure of classical RIS imposes restrictions on its ability to manipulate passive beamforming. In this study, we consider beyond diagonal RIS (BD-RIS) in the multi-cell transportation system, which goes beyond using diagonal phase shift matrices. In particular, we provide a new optimization framework to maximize the sum rate of BD-RIS assisted multi-cell transportation system by optimizing the power allocation of the base station and phase shift design of BD-RIS in each cell. We employ the block coordinate descent method to transform the original optimization problem and achieve a local optimal based on standard convex approaches. Numerical results demonstrate the benefits of adopting BD-RIS in multi-cell transportation systems compared to the classical RIS architecture.
IEEE Transactions on Intelligent Transportation Systems · مجلد 27 (2) · 2706-2715
Intelligent reconfigurable surfaces (IRS) have emerged as a promising technology to enhance wireless communications by dynamically controlling the propagation environment. Despite their potential, practical challenges such as effective integration with existing systems and efficient optimization remain critical. This paper investigates the sum capacity enhancement of NOMA-enabled uncrewed aerial vehicle (UAV) communications in vehicular networks assisted IRS. In urban environments where direct links from UAV to vehicles are often obstructed by buildings or other obstacles, the IRS plays a critical role in improving signal quality by reflecting signals toward vehicles. We consider a downlink NOMA transmission scenario, where the UAV serves multiple ground vehicles, and signals are delivered through both direct and IRS-assisted links. A joint optimization problem is formulated to maximize the sum capacity by simultaneously optimizing UAV power allocation and IRS passive beamforming while ensuring a minimum signal-to-interference plus noise ratio requirement for each vehicle. To address the non-convex nature and reduce the complexity of the optimization, we first transform the original problem using the first-order Taylor expansion method. Then, we employ a two-step solution based on the fixed-point iteration method for passive beamforming at the IRS and standard convex optimization for UAV power allocation. The proposed solution is compared with a benchmark scheme with direct UAV-to-vehicle communication without IRS assistance. Numerical results demonstrate that our proposed framework converges quickly and significantly outperforms the benchmarks in terms of system capacity.
The integration of beyond diagonal reconfigurable intelligent surfaces (BD-RIS) with non-orthogonal multiple access (NOMA) in the Internet of Vehicles (IoV) networks presents the transformative potential for 6G vehicular communications, promising unprecedented gains in energy and spectral efficiency. However, existing research fails to address the joint optimization of BD-RIS configuration, NOMA power allocation, and dynamic IoV association–a critical oversight given their inherent interdependence in practical deployment scenarios. Current literature predominantly examines these components in isolation, with conventional RIS architectures and orthogonal multiple access schemes, leading to suboptimal performance in high-mobility vehicular environments. This work bridges this gap by proposing a novel hybrid optimization framework for NOMA-aided BD-RIS assisted IoV networks. The proposed framework simultaneously optimizes the IoV association with the base station (BS), NOMA power allocation, and BD-RIS phase shift design to maximize the energy efficiency of the system while ensuring the minimum signal-to-interference plus noise ratios (SINRs) of IoVs. The proposed framework is formulated as non-linear optimization due to joint decision variables and rate expressions of IoVs, resulting in an NP-hard problem where achieving a joint optimal solution is computationally complex. To handle this complexity, the original joint formulation is decomposed into three subproblems: IoV association with BS, BS power allocation, and BD-RIS phase shift design. An efficient iterative solution is then developed through the synergistic combination of deep reinforcement learning, first-order Taylor expansion, and manifold optimization methods. For comprehensive evaluation, we introduce a NOMA-aided conventional RIS assisted IoV framework as a benchmark. Extensive numerical results based on Monte Carlo simulations demonstrate that the proposed NOMA-aided BD-RIS assisted IoV network achieves significant improvements of 32% in energy efficiency and 28% in spectral efficiency compared to conventional RIS-assisted architectures, validating its potential for next-generation vehicular networks.
beyond-diagonal reconfigurable intelligent surfacenon-orthogonal multiple accessInternet of Vehiclesenergy efficiency optimization
Sixth generation (6G)-enabled smart cities with intelligent reconfigurable surfaces (IRSs), unmanned aerial vehicles (UAVs), and non-orthogonal multiple access (NOMA) technologies have the potential to transform consumer electronics through ultra-fast wireless connectivity, effective resource utilization, and intelligent urban services. This paper presents a new optimization scheme in NOMA multi-UAV (M-UAV) networks by utilizing IRSs. The proposed scheme focuses on ground user equipment (GUE) UAV association, UAV power allocation and IRS passive beamforming (BF), with the objective of enhancing the system’s spectral efficiency (SE) under the assumption of imperfect successive interference cancellation (i-SIC). To tackle the non-linearity of the problem, we first perform GUE UAV association for available power allocation and BF. Then, we decouple the joint transmit power and BF design problem into two parts. Subsequently, an efficient solution is achieved by employing a combination of sequential quadratic programming, successive convex approximation, and difference-of-convex programming techniques. Through comprehensive numerical evaluations, we validate the effectiveness of the mathematical solution and demonstrate the superiority of our proposed optimization scheme over benchmark schemes. The results showcase notable performance improvements in terms of SE, thereby highlighting the potential benefits that can be achieved by leveraging the proposed approach in NOMA M-UAV networks.
reconfigurable intelligent surfaceunmanned aerial vehiclesnon-orthogonal multiple accessuser association