With growing urbanization, there are increasing demands on waste management systems that can be performed in an environmentally friendly way as well as efficiently. Current approaches to managing waste often have issues with efficiency, transparency, and engaging with the public. Blockchain technology has been identified as one potential solution to these problems because it offers several benefits including decentralization, security, and transparency. The selection of the best blockchain-based waste management (BBWM) system is very difficult due to the many different evaluation criteria that may conflict with each other. Therefore this research uses a multi-criteria decision making (MCDM) approach using CIMAS (Criteria Importance Assessment), for determining weights based upon subjective input, and LOPCOW (Logarithmic Percentage Change-Driven Objective Weighing), for determining weights based upon objective data within the MCDM framework. To rank alternatives effectively, an Alternative Ranking Order Method Accounting for Two-Step Normalization (AROMAN) technique is applied, ensuring a precise evaluation process. The use of T-Spherical Fuzzy Sets (T-SFS) captures all three (membership, non-membership, hesitation degree) and is used to address the variability that exists when making an expert judgment. Some of the key factors include; Technological Feasibility, Operational Costs, Scalability, Data Security, Regulatory Compliance, Environmental Impact. Based on the evaluation criteria, it appears that the Blockchain Enabled Waste Tracking System is the most appropriate alternative due to its high potential for Transparency, Regulatory Compliance and Fraud Prevention. In addition, this research will provide Policymakers, Urban Planners and Investors with a methodical way of making Data Driven Decisions on BBWM Investments.
Sixth generation (6G)-enabled smart cities with intelligent reconfigurable surfaces (IRSs), unmanned aerial vehicles (UAVs), and non-orthogonal multiple access (NOMA) technologies have the potential to transform consumer electronics through ultra-fast wireless connectivity, effective resource utilization, and intelligent urban services. This paper presents a new optimization scheme in NOMA multi-UAV (M-UAV) networks by utilizing IRSs. The proposed scheme focuses on ground user equipment (GUE) UAV association, UAV power allocation and IRS passive beamforming (BF), with the objective of enhancing the system’s spectral efficiency (SE) under the assumption of imperfect successive interference cancellation (i-SIC). To tackle the non-linearity of the problem, we first perform GUE UAV association for available power allocation and BF. Then, we decouple the joint transmit power and BF design problem into two parts. Subsequently, an efficient solution is achieved by employing a combination of sequential quadratic programming, successive convex approximation, and difference-of-convex programming techniques. Through comprehensive numerical evaluations, we validate the effectiveness of the mathematical solution and demonstrate the superiority of our proposed optimization scheme over benchmark schemes. The results showcase notable performance improvements in terms of SE, thereby highlighting the potential benefits that can be achieved by leveraging the proposed approach in NOMA M-UAV networks.
reconfigurable intelligent surfaceunmanned aerial vehiclesnon-orthogonal multiple accessuser association
The Internet of Things (IoT) is essential in several Internet application areas and remains a key technology for communication technologies. Shorter delays in transmission between Roadside Units (RSUs) and vehicles, road safety, and smooth traffic flow are the major difficulties of Intelligent Transportation System (ITS). Machine Learning (ML) was an advanced technique to find hidden insights into ITSs. This article introduces an Improved Arithmetic Optimization with Deep Learning Driven Traffic Congestion Control (IAOADL-TCC) for ITS in Smart Cities. The presented IAOADL-TCC model enables traffic data collection and route traffic on existing routes for avoiding traffic congestion in smart cities. The IAOADL-TCC algorithm exploits a hybrid convolution neural network attention long short-term memory (HCNN-ALSTM) method for traffic congestion control. In addition, an IAOA-based hyperparameter tuning strategy is derived to optimally modify the parameters of the HCNN-ALSTM model. The presented IAOADL-TCC model effectively enhances the flow of traffic and reduces congestion. The experimental validation was performed using the road traffic dataset from the Kaggle repository. The proposed model obtained an average accuracy of 98.03 % with an error rate of 1.97 %. The experimental analysis stated the superior performance of the IAOADL-TCC approach over other DL methods.
traffic congestion controlInternet of Thingsintelligent transportation systemsarithmetic optimization
Internet of Things (IoT) sensor networks are connected systems of physical devices set with actuators, sensors, and communication abilities, allowing them to gather, spread, and exchange information with centralized methods. These networks are essential in numerous businesses, such as healthcare, manufacturing, agriculture, and smart cities, as they deliver real-time observation, data-driven insights, and automation. Threat recognition in IoT sensor networks is a vital feature of safeguarding the protection and consistency of interconnected systems in the IoT. As IoT sensor networks endure to increase across various industries, the vulnerability to malicious actions and cyber-attacks increases. Threat recognition utilizing deep learning (DL) leverages neural networks to examine complex patterns and anomalies in data, permitting the identification of potential safety threats. DL techniques like convolutional neural networks (CNNs) or recurrent neural networks (RNNs) excel at learning complex representations of data and feature extraction, making them suitable for identifying sophisticated attacks in different fields, including cybersecurity. This research develops a Hybrid Sine-Cosine Chimp Optimization Feature Selection with a Deep Learning (HSCCOFS-DL) approach for Threat Recognition in IoT Sensor Networks. The foremost aim of the HSCCOFS-DL system lies in the automated detection of threats using DL models. To accomplish this, the HSCCOFS-DL approach undergoes a data normalization process. Besides, the selection of features can be performed using the HSCCO algorithm. Meanwhile, the symmetrical autoencoder (SAE) technique effectively classifies threats. Finally, the sparrow search algorithm (SSA) can be applied to the selection of the hyperparameter of the SAE system. The experimental assessment of the HSCCOFS-DL technique takes place on a benchmark dataset. The simulation results indicated that the HSCCOFS-DL approach attains enhanced performance over other methods.
Modern energy markets have undergone a revolution due to the development of smart grids, which allow users to take part in demand response (DR) initiatives and keep the balance between demand and power generation. This work presents a new method with a Fractional Order PID controller (FOPID) for optimizing the power consumption of appliances in smart homes. An improved Secretary Bird Optimization (ISBO) algorithm is presented in this research for better scheduling appliance power consumption under time-of-use (TOU) and critical peak pricing (CPP) schemes. This strategy uses TOU and CPP, two dynamic pricing schemes, to minimize peak demand and cut energy expenses. The proposed strategy creates an energy management system (EMS) that is more effective by integrating energy storage devices (ESD) and renewable energy sources (RES) with the electrical grid. Due to this integration with FOPID, the best possible scheduling of appliances is made possible by CPP and TOU pricing schemes, which are intended to shift load and lower the peak-to-average ratio (PAR). The FOPID had been incorporated with EMS to enhance the stability as well as precision. Reductions in energy consumption and electricity costs across a range of scenarios are evident in the simulation results conducted in the MATLAB environment.
fractional order PID controllerdemand responseappliance schedulingsmart home energy management
Smart Cities refer to urban areas which exploits recent technologies for improving the performance, sustainability, and livability of their infrastructure and services. Crowd Density Analysis (CDA), a vital component of Smart Cities, involves the use of sensors, cameras, and data analytics to monitor and analyze the density and movement of people in public spaces. CDA utilizing DL harnesses the control of neural networks to mechanically and exactly evaluate the density of crowds in numerous settings, mainly in smart cities. DL techniques like Recurrent Neural Network (RNN) and Convolutional Neural Network (CNN), are trained on vast datasets of crowd videos or images to learn complex designs and features. These models can forecast crowd density levels, recognize crowd anomalies, and offer real-time visions into crowd behavior. This study designs an Artificial Intelligence Driven Crowd Density Analysis for Sustainable Smart Cities (AICDA-SSC) technique. The aim of the AICDA-SSC method is to analyze the crowd density and classify it into multiple classes by the use of hyperparameter-tuned DL models. To accomplish this, the AICDA-SSC technique applies contrast enhancement using the CLAHE approach. Besides, the complex and intrinsic features can be derived by the use of the Inception v3 model and its hyperparameters can be chosen by the use of the marine predator’s algorithm (MPA). For crowd density detection and classification, the AICDA-SSC technique applies a gated recurrent unit (GRU) model. Finally, a chaotic sooty tern optimizer algorithm (CSTOA) based hyperparameter selection procedure takes place to increase the effectiveness of the GRU system. The experimental evaluation of the AICDA-SSC technique takes place on a crowd-density image dataset. The experimentation values showcase the superior performance of the AICDA-SSC method to the recently developed DL models.
In the contemporary landscape of smart cities, ensuring the security and confidentiality of transmitted data has become paramount. The proliferation of Internet of Things (IoT) devices, mobile communication platforms, and wireless sensor networks has magnified the need for robust cryptographic solutions to safeguard sensitive information from malicious adversaries. In response to these challenges, we introduce ChessCrypt-a novel approach to enhancing wireless communication security through the development of a new S-Box algorithm inspired by the nonlinear movement patterns of chess pieces. ChessCrypt leverages the dynamic and unpredictable nature of chess piece movements, namely knights, kings, and bishops, to introduce a high degree of nonlinearity and confusion into the encryption process. By incorporating elements of randomness and unpredictability, our proposed S-Box algorithm offers robust protection against a wide range of cyber threats, including eavesdropping, data interception, and cryptographic attacks. We demonstrate the effectiveness and resilience of ChessCrypt through rigorous testing and analysis, showcasing its superiority over traditional cryptographic methods in enhancing the security of wireless communication networks. Our results underscore the significance of ChessCrypt as a promising solution for fortifying wireless communication security in an increasingly interconnected world of ours.
S-boxnonlinearityconfusionwireless communication security
The integration of AI and the IoT in education has the potential to revolutionize the way we learn. Personalized learning, real-time feedback and support, and immersive learning experiences are some of the benefits that AI and the IoT can bring to the education system. In this regard, this research paper aims to investigate how AI and the IoT can be integrated into sustainable education in order to provide students with personalized and immersive learning experiences during pandemics, such as COVID-19, for smart cities. The study’s key findings report that AI can be employed in sustainable education through personalized learning. AI-powered algorithms can be used to analyze student data and create personalized learning experiences for each student. This includes providing students with tailored content, assessments, and feedback that align with their unique learning style and pace. Additionally, AI can be used to communicate with students in a more natural and human-like way, making the learning experience more engaging and interactive. Another key aspect of the integration of AI and the IoT in education obtained from this research is the ability to provide real-time feedback and support. IoT-enabled devices, such as smart cameras and microphones, can be used to monitor student engagement and provide real-time feedback. AI algorithms can then use these data to adapt the learning experience in real time. IoT-enabled devices, such as tablets and laptops, can be used to collect and process student work, allowing for the automatic grading of assignments and assessments. Additionally, IoT technology can facilitate remote monitoring and grading of student work, which would be particularly useful for students who cannot attend traditional classroom settings. Furthermore, AI and the IoT can also be used to create intelligent personal learning environments (PLEs) that provide students with personalized, adaptive, and engaging learning experiences. IoT-enabled devices, such as smart cameras and microphones, combined with AI-powered algorithms, can provide real-time feedback and support, allowing the PLE to adapt to the student’s needs and preferences. It is concluded that integrating AI and the IoT in sustainable education can revolutionize the way people learn, providing students with personalized, real-time feedback and support and opening up new opportunities for remote and disadvantaged students. However, it will be important to ensure that the use of AI and the IoT in education is ethical and responsible to ensure that all students have equal access to the benefits of these technologies.
artificial intelligence in educationInternet of Thingssustainable educationpersonalized learning
The applications and services offered by the Internet of Things (IoT) have grown significantly during the past few years. Device makers and corporate suppliers have taken notice of this, which has led to a sudden inflow of new-age firms. Confidential data and information are involved as IoT device use rises. IoT device security has emerged as a major issue and is becoming more and more significant. Appropriate security measures are needed to prevent dangers and hazards associated with the adoption of smart technology in smart cities and houses that run IoT devices, according to security evaluations. In order to safeguard the smart home environment, our research focuses on IoT device firmware. The security methodology presented in this research may be used to analyze and investigate IoT firmware, revealing sensitive data and hardcoded user IDs and passwords that can be used in future attacks and breach of IoT devices. The authors put out an idea for how real-time datasets produced by IoT search engines may be analyzed using keywords according to different device kinds, locations, and manufacturers. The results showed that it took device owners 11–13 months to upgrade the firmware. Only HP and Cisco routinely provided firmware updates to protect IoT devices among IoT device makers.
Internet of Thingshome automationfirmware securitysensitive information detection
Internet of Things (IoT) technology involves a network of interconnected devices and sensors that gather and exchange information. In smart cities, IoT devices were utilized in several fields including energy, transportation, waste management, healthcare, etc., to improve the overall quality of life and sustainability of the populace. But, as the usage of IoT increases, the cybersecurity and data privacy become a concern of safety. An anomaly detection system helps to identify possible data breaches or cyber-attacks by identifying abnormal data patterns. Deep learning (DL) driven anomaly detection has emerged as an effective and powerful method for identifying abnormal behaviours or patterns in the data domain. This technique leverages the abilities of a deep neural network for automated learning of complex patterns and representations from data, which make it better for anomaly detection task where irregularities cannot be easily defined by handcrafted rules. This paper establishes a new Billiard Based Optimization with Deep Learning Driven Anomaly Detection and Classification (BBODL-ADC) technique in IoT-assisted Sustainable Smart Cities. The goal of the BBODL-ADC technique lies in the proper recognition and classification of anomalies in the IoT-assisted smart city. To obtain that, the BBODL-ADC system applies a binary pigeon optimization algorithm (BPEO) algorithm for the effectual selection of features. Besides, the BBODL-ADC technique utilizes Elman recurrent neural network (ERNN) approach for the recognition and classification of anomalies. Moreover, the BBO system can be used for better parameters chosen by the ERNN algorithm. The stimulation value of the BBODL-ADC algorithm can be executed benchmark database. The achieved outcomes demonstrate the remarkable outcome of the BBODL-ADC methodology of 95.69% and 99.21% compared to existing models under dataset-1 and dataset-2.
deep learning anomaly detectionElman neural networkfeature selectionInternet of Things security
Journal of Sensor and Actuator Networks · مجلد 12 (1) · 10-10
As an extension of the wired network, the use of the wireless communication network has considerably boosted users’ productivity at work and in their daily lives. The most notable aspect of the wireless communication network is that it overcomes the constraints of the wired network, reduces the amount of cost spent on wire maintenance, and distributes itself in a manner that is both more extensive and flexible. Combining wireless communication with the Internet of Things (IoT) can be used in several applications, including smart cities, smart traffic, smart farming, smart drones, etc. However, when exchanging data, wireless communication networks use an open network, allowing unauthorized users to engage in communication that is seriously destructive. Therefore, authentication through a digital signature will be the best solution to tackle such problems. Several digital signatures are contributing to the authentication process in a wireless communication network; however, they are suffering from several problems, including forward security, key escrow, certificate management, revocations, and high computational and communication costs, respectively. Keeping in view the above problems, in this paper we proposed an efficient certificateless forward-secure signature scheme for secure deployments in wireless communication networks. The security analysis of the proposed scheme is carried out using the random oracle model (ROM), which shows that it is unforgeable against type 1 and type 2 adversaries. Moreover, the computational and communication cost analyses are carried out by using major operations, major operations cost in milliseconds, and extra communication bits. The comparative analysis with the existing scheme shows that the proposed scheme reduces the computational cost from 19.23% to 97.54% and the communication overhead from 11.90% to 83.48%, which means that the proposed scheme is efficient, faster, and more secure for communication in the wireless communication network.
certificateless cryptographyforward-secure signaturesdigital signaturesInternet of Things security
International Journal of Network Security & Its Applications · مجلد 13 (6) · 55-69
Smart cities are expected to significantly improve people's quality of life, promote sustainable development, and enhance the efficiency of operations. With the implementation of many smart devices, c problems have become a serious challenge that needs strong treatments, especially the cyber-attack, which most countries suffer from it. My study focuses on the security of smart city systems, which include equipment like air conditioning, alarm systems, lighting, and doors. Some of the difficulties that arise daily may be found in the garage. This research aims to come up with a simulation of smart devices that can be and reduce cyber attach. Use of Cisco Packet tracer Features Simulated smart home and c devices are monitored. Simulation results show that smart objects can be connected to the home portal and objects can be successfullymonitored which leads to the idea of real-life implementation and see. In my research make manysolutions for attachingissues,which was great, and apply some wirelessprotocol.
smart city securityInternet of Things securitycyberattackssmart home devices