جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

19 مُخرَج نتائج البحث عن «stat»

مقالوصول مفتوح20261استشهاد· Semantic Scholar

Digital twin-assisted blockchain IoT security model using contrastive and causal learning techniques

Scientific Reports · مجلد 16 (1)

The rapid growth of Internet of Things (IoT) devices in smart grids and industrial control systems means that the global state has attained a level of technological evolution. Yet this growth has also created an enormous attack surface with millions of vulnerable endpoints, thus revealing inherent weaknesses of traditional security models. These conventional systems are fraught with data integrity challenges, single points of failure, and no proactive defense against new, adaptive cyber-physical threats. To overcome these limitations, this paper presents "Causio-TwinChain," a new security model that synergistically integrates three leading-edge technologies to establish a proactive, self-diagnostic, and tamper-resistant security framework for critical IoT infrastructure. A digital twin is a virtual replica that can monitor physical devices in real time via sandboxing. A permissioned blockchain provides an immutable, tamper-proof ledger for all device data and transactions, ensuring data integrity and auditability. Two kinds of machine-learning engines form the core intelligence: contrastive Learning, which detects subtle anomalies by modeling normal operations; and structural causal Learning, which diagnoses root causes of security incidents and predicts their potential impact. The model's superior efficacy is demonstrated on an industrial IoT dataset. Causio-TwinChain yielded a 15.3% higher F1-score in novel attack detection, and reduced the mean time for incident diagnosis by 68% compared to benchmark intrusion detection systems. This model reduced the false-positive rate by 22%, demonstrating its robustness in noisy environments. Moving beyond mere attack detection to explainable diagnosis and predictive mitigation, this work establishes a new benchmark for building proactive, resilient, and self-healing security frameworks that safeguard the most critical IoT applications and enhance trust and continuity in operational services.

digital twinblockchainInternet of Things securitycontrastive learning
مقالمفتوح (مستودع)202522استشهاد· Semantic Scholar

Sum Rate Maximization for 6G Beyond Diagonal RIS-Assisted Multi-Cell Transportation Systems

IEEE Transactions on Intelligent Transportation Systems · مجلد 26 (10) · 17601-17611

With the rapid evolution toward data-intensive applications and sustainable urban mobility, upcoming sixth-generation (6G) wireless networks must deliver enhanced coverage, high spectral efficiency, and energy optimization across densely populated areas. However, achieving these requirements poses significant challenges due to the dynamic nature of urban environments, high interference in multi-cell systems, and limitations in conventional passive beamforming technologies. To address these challenges, reconfigurable intelligent surface (RIS) is considered a highly promising approach for enabling and improving 6G wireless communications. This is because it has the ability to efficiently manipulate wireless channels at a lower cost. Considerable study has focused on the utilization of conventional diagonal RIS, in which each individual RIS component is linked to its own ground load but not interconnected with other elements. Nevertheless, the uncomplicated structure of classical RIS imposes restrictions on its ability to manipulate passive beamforming. In this study, we consider beyond diagonal RIS (BD-RIS) in the multi-cell transportation system, which goes beyond using diagonal phase shift matrices. In particular, we provide a new optimization framework to maximize the sum rate of BD-RIS assisted multi-cell transportation system by optimizing the power allocation of the base station and phase shift design of BD-RIS in each cell. We employ the block coordinate descent method to transform the original optimization problem and achieve a local optimal based on standard convex approaches. Numerical results demonstrate the benefits of adopting BD-RIS in multi-cell transportation systems compared to the classical RIS architecture.

beyond-diagonal reconfigurable intelligent surfacesum rate maximization6Gpassive beamforming
مقالوصول مفتوح20257استشهاد· Semantic Scholar

Optimization of 6G resource allocation using CyberTwin function-based service enhancement scheme

EURASIP Journal on Wireless Communications and Networking · مجلد 2025 (1)

The most innovative Service-Optimized Logging for Resource Allocation (SOL-RA) is in situations that support 6G connection. The CyberTwin architecture optimizes the quality of service provided to end users in 6G communications by using the dependability of terahertz connections and interactions of a machine-type nature. Elastically sharing elastic resources among users is made possible by the proposed resource allocation strategy, which makes use of proprietary logger functions. This ensures that efficient allocation is achieved without overlapping or lengthy wait periods. Within the framework of SOL-RA, a categorization mechanism is implemented for dense requests, which differentiates them as either stationary or priority services. Resource allocations are dynamically done based on this categorization, which enhances the organization's responsiveness to different needs. Through a tree classifier learning mechanism, CyberTwin logs play an essential part in the processing of requests and the preparation of resources. This helps to ensure that resources are distributed without inefficiency. Requests that are generating a backlog are identified and processed in parallel by the system, which significantly reduces the amount of time that is wasted waiting. In order to guarantee a specialized distribution for the categorized outputs, resource allocations are directed by CyberTwin data logs. An examination of the performance of the SOL-RA scheme takes into account important metrics such service latency, service backlog, resource usage, and request-to-response ratio. This research offers insights into the efficacy of the scheme in maximizing service quality and resource consumption in 6G settings.

terahertz communicationmachine-type communicationclassification treesservice latency
مقالمفتوح (مستودع)20253استشهاد· Semantic Scholar

Digital Twin Enabled 6G MEC Networks: Computational Energy Efficiency for Consumer IIoT in Industry 5.0

IEEE Transactions on Consumer Electronics · مجلد 71 (3) · 7874-7881

The integration of digital twins (DTs) with mobile edge computing (MEC) offers transformative potential for computational energy efficiency in Industry 5.0-driven 6G networks. However, existing frameworks often lack proactive resource allocation using DTs, relying instead on reactive adjustments. This paper proposes a novel DT-MEC framework that uniquely employs virtual DT replicas of MEC servers to predict computational states (e.g., server workloads, latency trends) in real time, enabling dynamic optimization of task offloading for large-scale Industrial IoT (IIoT) networks. Unlike prior DT-MEC integrations that focus on static resource allocation, our approach leverages predictive DT modeling to preemptively adjust resources, addressing a critical gap in the literature. To maximize energy efficiency, we formulate a mixed-integer non-linear problem (MINLP) that jointly optimizes local computation, transmission power, DT-edge association, and task execution time. The problem is transformed into a tractable form using piecewise linearization to reduce computational complexity and solved via an adaptive iterative algorithm that alternates between resource allocation and DT state updates. This method ensures a balance between solution accuracy and computational overhead, a key innovation compared to conventional optimization techniques. Simulations demonstrate that our framework achieves 40% higher energy efficiency, 50% lower outage probability, and 95% task completion rates compared to state-of-the-art benchmarks. Specific improvements include a 6.63% gain over binary offloading and 150.08% over edge-only schemes, validating its practicality for Industry 5.0 deployments. These results highlight our contributions: (1) a proactive DT-driven resource allocation mechanism, (2) a linearization technique for non-convex MINLP problems, and (3) an adaptive iterative solver that outperforms existing approaches in dynamic IIoT environments.

digital twinmobile edge computing6Gtask offloading
مقالوصول مغلق20252استشهاد· Semantic Scholar

Hybrid Optimization Framework for Energy Efficiency Maximization in NOMA-Aided Internet of Vehicles with Beyond Diagonal RIS

IEEE Internet of Things Journal · 1-1

The integration of beyond diagonal reconfigurable intelligent surfaces (BD-RIS) with non-orthogonal multiple access (NOMA) in the Internet of Vehicles (IoV) networks presents the transformative potential for 6G vehicular communications, promising unprecedented gains in energy and spectral efficiency. However, existing research fails to address the joint optimization of BD-RIS configuration, NOMA power allocation, and dynamic IoV association–a critical oversight given their inherent interdependence in practical deployment scenarios. Current literature predominantly examines these components in isolation, with conventional RIS architectures and orthogonal multiple access schemes, leading to suboptimal performance in high-mobility vehicular environments. This work bridges this gap by proposing a novel hybrid optimization framework for NOMA-aided BD-RIS assisted IoV networks. The proposed framework simultaneously optimizes the IoV association with the base station (BS), NOMA power allocation, and BD-RIS phase shift design to maximize the energy efficiency of the system while ensuring the minimum signal-to-interference plus noise ratios (SINRs) of IoVs. The proposed framework is formulated as non-linear optimization due to joint decision variables and rate expressions of IoVs, resulting in an NP-hard problem where achieving a joint optimal solution is computationally complex. To handle this complexity, the original joint formulation is decomposed into three subproblems: IoV association with BS, BS power allocation, and BD-RIS phase shift design. An efficient iterative solution is then developed through the synergistic combination of deep reinforcement learning, first-order Taylor expansion, and manifold optimization methods. For comprehensive evaluation, we introduce a NOMA-aided conventional RIS assisted IoV framework as a benchmark. Extensive numerical results based on Monte Carlo simulations demonstrate that the proposed NOMA-aided BD-RIS assisted IoV network achieves significant improvements of 32% in energy efficiency and 28% in spectral efficiency compared to conventional RIS-assisted architectures, validating its potential for next-generation vehicular networks.

beyond-diagonal reconfigurable intelligent surfacenon-orthogonal multiple accessInternet of Vehiclesenergy efficiency optimization
ورقة مؤتمروصول مغلق2025

Deep reinforcement learning-based real-time data analytics of automatic industrial robot for digital transformation

AIP conference proceedings · مجلد 3343 · 040048-040048

In Industry 4.0, industrial robot trajectory planning requires real-time collision avoidance. This is solved by our innovative Collision Criticality (CC) LSTM-DRL approach. This work suggests navigating many landscapes with diverse barriers using deep reinforcement learning (DRL) and long-short-term memory for data analytics in digital transformation. The robot’s current state is used by Crit LSTM DRL to estimate collision timing and obstacle CC. Obstacle courses use CC ranks. Robotics creates a fixed-dimensional vector that accurately represents reality using LSTM models. After that, the robot’s current state is added to this vector to complete its perception and cognition. Deep Reinforcement learning (DRL) optimizes state values using input data. At each time step, Deep Reinforcement Learning (DRL) and Long Short-Term Memory (LSTM) identify the next state values for all possible actions. System operation depends on the highest value’s action. We learned three environmental models in this research. A scenario with five, 10, or one to ten barriers was classified. These models were tested for adaptability to different obstacle densities. In obstacle-rich situations, researchers tested these three models’ strengths and weaknesses. Testing the algorithm in various settings proves its efficacy. The program also considers the combined influence of impediments on the robot by portraying them as a joint state. CC-LSTM-DRL performs well in Industry 4.0’s dynamic and challenging conditions, according to experiments. Mobile robots can confidently navigate changing environments due to their versatility and flexibility, making them ideal industrial tools. Industry 4.0, Collision Criticality, Industrial Robot, Autonomous Systems, Mobile Robots, Collision Risk

deep reinforcement learningreal-time analyticsindustrial robotsdigital transformation
مقالوصول مفتوح202431استشهاد· Semantic Scholar

DQQS: Deep Reinforcement Learning-Based Technique for Enhancing Security and Performance in SDN-IoT Environments

IEEE Access · مجلد 12 · 60568-60587

The Internet of Things (IoT) is an emerging technology that allow smart devices to communicate through various heterogeneous channels (wired or wireless). However, for conventional networks, it has become a challenging task to efficiently control and manage the data flows of a huge number of devices. Software-defined networking (SDN) is a new way of thinking about networking. Because it is programmable, flexible, agile, and gives you a big picture of the network, it has tried to solve some IoT problems, like scalability, heterogeneity, and complexity. In large-scale SDN-IoT networks, there is a requirement for routing protocols that are both efficient and secure in order to ensure a superior level of quality of service (QoS) and quality of experience (QoE). To address the above stated challenges, a novel deep reinforcement learning (DRL) known as DQQS model is proposed. The aim is to achieve QoS and QoE while also ensuring the security of the SDN-IoT network. The proposed DQQS model dynamically extracts patterns from the past network history by interacting with the underlying network and generating optimized routing policies. This article employs three network metrics—throughput, latency, and the probability of avoiding malicious nodes—to measure the performance of DQQS. Simulations reveal that the proposed framework outperforms four state-of-the-art routing algorithms: OSPF, L-L Routing, Sailfish Routing, and RL-Routing in terms of both throughput and latency. For instance, in an attacked environment, the proposed DQQS model achieved the highest throughput value of 14.5 Mbps, surpassing OSPF at 8 Mbps, L-L at 8.2 Mbps, Sailfish at 9 Mbps, and RL at 9.5 Mbps. Similarly, this model exhibited superior performance in latency, recording the lowest latency value of 52 ms, compared to OSPF 88 ms, L-L 85 ms, Sailfish 72 ms, and RL 75 ms routing algorithms. The experimental results demonstrate that this new DQQS model is a pioneering deep reinforcement learning-based technique that optimally addresses secure routing in the SDN-IoT environment, ensuring enhanced quality of service and experience, and outperforming state-of-the art DL methodologies in both security and network performance metrics.

software-defined networkingInternet of Thingssecure routingdeep reinforcement learning
مقالمفتوح (مستودع)202424استشهاد· Semantic Scholar

Federated-Reinforcement Learning-Assisted IoT Consumers System for Kidney Disease Images

IEEE Transactions on Consumer Electronics · مجلد 70 (4) · 7163-7173

The number of people with kidney disease rises every day for many reasons. Many existing machine-learning-enabled mechanisms for processing kidney disease suffer from long delays and consume much more resources during processing. In this paper, the study shows how federated and reinforcement learning schemes can be used to develop the best delay scheme. The scheme must optimize both the internal and external states of reinforcement learning and the federated learning fog cloud network. This work presents the Adaptive Federated Reinforcement Learning-Enabled System (AFRLS) for Internet of Things (IoT) consumers’ kidney disease image processing. The main relationship between IoT consumers and kidney image is that the data is collected from different IoT consumer sources, such as ultrasound and X-rays in healthcare clinics. In healthcare applications, kidney urinary tasks reduce the time it takes to preprocess federated learning datasets for training and testing and run them on different fog and cloud nodes. AFRLS decides the scheduling on other nodes and improves constraints based on the decision tree. Based on the simulation results, AFRLS is a new strategy that reduces the time tasks need to be delayed compared to other machine learning methods used in fog cloud networks. The AFRLS improved the delay among nodes by 55%, the delay among internal states by 40%, and the training and testing delay by 51%.

federated learningreinforcement learningkidney disease diagnosiskidney ultrasound images
ورقة مؤتمروصول مغلق202422استشهاد· Semantic Scholar

Two-Area Power System with Automatic Generation Control Utilizing PID Control, FOPID, Particle Swarm Optimization, and Genetic Algorithms

International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies (ICAECT) · 1-6

This study aims to present a feasible LFC (Load Frequency Control) model that integrates physical security limitations, namely GRC, GDB, and TD. The presence of this characteristic guarantees that the design is not only accurate but also capable of being materialized in a physical form. It is suggested that the traditional PI controller be replaced with a PID controller in order to handle the issues that are posed by large-scale power systems that are interconnected. Developing extremely efficient soft computing approaches that are capable of producing the necessary results for both individual and extensive power systems while taking into consideration flaws in modeling is the goal of this endeavor. It is important to get the frequency deviation to zero while still following the rules set by real issues and different working conditions. In order to maintain the electrical flow between the inter-area tie lines that are located within the various control zones at the schedule values that have been specified. In order to achieve optimal levels of performance in both steady state and transient conditions. The purpose of this is to obtain valuable multiple solutions with the intention of future planning and design. It is important to simplify the robust load frequency control design problem by changing it into a low-order proportional integral derivative (PID) control synthesis problem in order to address the practical benefits. This approach is commonly employed in real-world power systems applications.

load frequency controlautomatic generation controltwo-area power systemPID controller
مقالوصول مفتوح202420استشهاد· Semantic Scholar

Hybrid deep learning-based traffic congestion control in IoT environment using enhanced arithmetic optimization technique

Alexandria Engineering Journal · مجلد 105 · 331-340

The Internet of Things (IoT) is essential in several Internet application areas and remains a key technology for communication technologies. Shorter delays in transmission between Roadside Units (RSUs) and vehicles, road safety, and smooth traffic flow are the major difficulties of Intelligent Transportation System (ITS). Machine Learning (ML) was an advanced technique to find hidden insights into ITSs. This article introduces an Improved Arithmetic Optimization with Deep Learning Driven Traffic Congestion Control (IAOADL-TCC) for ITS in Smart Cities. The presented IAOADL-TCC model enables traffic data collection and route traffic on existing routes for avoiding traffic congestion in smart cities. The IAOADL-TCC algorithm exploits a hybrid convolution neural network attention long short-term memory (HCNN-ALSTM) method for traffic congestion control. In addition, an IAOA-based hyperparameter tuning strategy is derived to optimally modify the parameters of the HCNN-ALSTM model. The presented IAOADL-TCC model effectively enhances the flow of traffic and reduces congestion. The experimental validation was performed using the road traffic dataset from the Kaggle repository. The proposed model obtained an average accuracy of 98.03 % with an error rate of 1.97 %. The experimental analysis stated the superior performance of the IAOADL-TCC approach over other DL methods.

traffic congestion controlInternet of Thingsintelligent transportation systemsarithmetic optimization
مقالوصول مغلق202419استشهاد· Semantic Scholar

Optimizing Cluster Head Selection for E-Commerce-Enabled Wireless Sensor Networks

IEEE Transactions on Consumer Electronics · مجلد 70 (1) · 1640-1647

In wireless sensor networks, the existing clustering head selection protocol is unworkable, leading to uneven network loads and a shorter network lifetime. To improve energy-effective wireless sensor networks (WSN) for e-commerce applications, a cluster head selection technique called CIBOA (Cluster Head Selection using Integrated Butterfly Optimization technique) has been created to address this problem. The current clustering head selection mechanism in wireless sensor networks is ineffective, which results in unequal network loads and a shorter network lifetime. The Butterfly Optimization Algorithm (BOA) has undergone significant modifications to enhance performance. These enhancements significantly boost the optimization speed and accuracy of BOA, thereby strengthening its search capabilities. During the process of selecting cluster heads (CH), a novel fitness function has been developed. This function considers variables such as remaining energy levels, the distance between nodes and base stations, and the average distance between neighboring nodes. The results show that CIBOA comprehensively considers factors like node energy and distance. This holistic approach results in a reduction in overall network operational time, making it particularly suitable for Energy-efficient networks of wireless sensors, especially in the context of e-commerce applications.

cluster head selectionwireless sensor networksbutterfly optimization algorithme-commerce applications
مقالوصول مفتوح202410استشهاد· Semantic Scholar

Game theory-based optimization for efficient IoT task offloading in 6G network base stations

Measurement Sensors · مجلد 33 · 101184-101184

This study aims to optimise computing for intricate jobs within the overlapping coverage of 6G network base stations. A multi-access edge computing network model is created by solving the issues of task offloading. This model involves many base stations and IoT devices. It takes into account factors such as task delay, energy consumption, societal impacts, and economic incentives. The objective of joint optimization is to maximize the revenues of base stations and the utilities of IoT devices by considering base station price, IoT device base station selection, and job offloading mechanisms. The IoT device base station selection is addressed using a many-to-one matching game model, while pricing and task offloading interactions are managed by a two-stage approach based on Stackelberg game theory. The suggested Optimal Pricing and Best Response Algorithm (OBGT), which is based on Game Theory, successfully reaches equilibrium solutions. It demonstrates rapid convergence in simulations and improves both base station profits and IoT device utility. This study integrates data-driven mobile computing systems assurance for futuristic smart vertical networks, enhancing the efficiency of task offloading and optimization.

mobile edge computingStackelberg gameenergy consumptiontask delay
ورقة مؤتمروصول مغلق20245استشهاد· Semantic Scholar

Deep Reinforcement Learning-Based Real-time Data Analytics of Automatic Industrial Robot for High Speed Communication

IEEE International Conference on Innovations in High Speed Communication and Signal Processing (IHCSP) · 1-8

In Industry 4.0, industrial robot trajectory planning requires real-time collision avoidance. This is solved by our innovative Collision Criticality (CC) LSTM-DRL approach. This work suggests navigating many landscapes with diverse barriers using deep reinforcement learning (DRL) and long-short-term memory for data analytics in high Speed Communication. The robot's current state is used by Crit LSTM DRL to estimate collision timing and obstacle CC. Obstacle courses use CC ranks. Robotics creates a fixed-dimensional vector that accurately represents reality using LSTM models. After that, the robot's current state is added to this vector to complete its perception and cognition. Deep Reinforcement Learning (DRL) optimalizes state values using input data. At each time step, Deep Reinforcement Learning (DRL) and Long Short-Term Memory (LSTM) identify the next state values for all possible actions. System operation depends on the highest value's action. We learned three environmental models in this research. A scenario with five, 10, or one to ten barriers was classified. These models were tested for adaptability to different obstacle densities. In obstacle-rich situations, researchers tested these three models' strengths and weaknesses. Testing the algorithm in various settings proves its efficacy. The program also considers the combined influence of impediments on the robot by portraying them as a joint state. CC-LSTM-DRL performs well in Industry 4.0's dynamic and challenging conditions, according to experiments. Mobile robots can confidently navigate changing environments due to their versatility and flexibility, making them ideal industrial tools.

collision avoidanceLSTMdeep reinforcement learningobstacle density
فصل كتابوصول مغلق20245استشهاد

Spatial federated learning and blockchain-based 5G communication model for hiding confidential information

CRC Press eBooks · 40-63

At present, the preferred method of transmitting a rapid blockchain message is to send several transactions, constituting a covert 5G communication technique. However, this approach is inadequate for processing larger quantities of sensitive data, and the potential for losing confidential information is significant. Additionally, the sender’s identity is not concealed. Despite the high embedding rate of steganography techniques, they are increasingly vulnerable to detection and statistical feature-based analysis. This investigation suggests a covert blockchain communication methodology that incorporates spatial federated learning and spatial blockchain as a means of fixing these issues. By utilizing Ciphertext-Policy Attribute-Based Encryption (CP-ABE) to encrypt the sensitive document and uploading it to the Inter Planetary File System (IPFS), the technique conceals sensitive files and the sender’s identity. Then, using image steganography based on Generative Adversarial Networks (GAN), the sender implants the hash value of the encrypted document into a carrier image. After uploading the encrypted image to IPFS, the sender creates a transaction with the hash value of the encrypted image. This transaction is then signed by a ring signature and broadcasted to the blockchain network for verification and confirmation. The recipient retrieves the encrypted document and decrypts it according to the access control policy established by CP-ABE. According to experimental findings, this model can increase the volume of sensitive data transmitted from KB to MB while providing higher confidentiality and security.

covert communicationblockchain5Gciphertext-policy attribute-based encryption
ورقة مؤتمروصول مغلق20233استشهاد· Semantic Scholar

Blockchain Based Dead Reckoning navigation system for Fault detection and secure Communication over VANET

International Conference on New Frontiers in Communication, Automation, Management and Security (ICCAMS) · 1-7

This research paper presents a blockchain-based approach for fault detection and secure communication in vehicular ad hoc networks (VANETs). VANETs are an emerging technology that allows vehicles to communicate with each other and with the surrounding infrastructure to improve safety and efficiency on the roads. However, the decentralized and dynamic nature of VANETs makes them vulnerable to various types of attacks, including false data injection and communication interference. To address these challenges, the proposed approach utilizes blockchain technology to ensure the integrity and authenticity of data exchanged among vehicles and the infrastructure. The system also includes a fault detection mechanism that can detect and isolate faulty vehicles to prevent them from disrupting the communication network. However, VANETs are distinct from conventional mobile ad hoc networks due to the high mobility of vehicles, which creates dynamic network environments and frequent link interruptions that result in message loss. A hierarchical defect detection method based on dead reckoning is proposed to address these issues. The technique uses the dead reckoning model to predict the transmission time of pulse messages and builds a hierarchical detection architecture with Roadside Units (RSUs) functioning as static nodes. This architecture enhances the efficacy of VANET fault detection. The proposed method was validated by NS-2 simulations, demonstrating superior performance in terms of detection speed, accuracy, and detection burden compared to the baseline fault detection method.

vehicular ad hoc networksblockchaindead reckoningfault detection