جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

5 مُخرَج نتائج البحث عن «throughput»

مقالوصول مغلق20252استشهاد· Semantic Scholar

Blockchain‐Based Anomaly Detection in Vehicular Ad‐Hoc Networks Using Deep Reinforcement Learning

Transactions on Emerging Telecommunications Technologies · مجلد 36 (10)

ABSTRACT Utilizing blockchain in vehicular ad‐hoc networks (VANETs) can proficiently resolve concerns pertaining to data security and privacy. The limited throughput of blockchain obstructs its extensive implementation in VANETs. Current studies on enhancing blockchain throughput frequently encounter the issue of action space proliferation, leading to inadequate scalability. This research presents a strategy for optimizing blockchain performance on VANETs using deep reinforcement learning (DRL). The suggested method enhances blockchain throughput by selecting block producers and consensus methods, and by modifying block size and intervals, while maintaining decentralization, low latency, and security in VANET‐based blockchain systems. Furthermore, to augment network security, an anomaly detection mechanism is incorporated, utilizing machine learning techniques to identify and mitigate potential attacks aimed at VANETs. The proposed system enhances throughput and fortifies resilience against malicious operations by identifying anomalous patterns in network behavior. The method uses the BDQ framework to meticulously partition the action space, tackling the action space explosion issue that occurs with conventional DRL techniques in blockchain throughput optimization. Simulation results indicate that the suggested solution significantly improves the throughput and security of the VANET‐based blockchain system.

vehicular ad hoc networksblockchainanomaly detectiondeep reinforcement learning
مقالوصول مفتوح202431استشهاد· Semantic Scholar

DQQS: Deep Reinforcement Learning-Based Technique for Enhancing Security and Performance in SDN-IoT Environments

IEEE Access · مجلد 12 · 60568-60587

The Internet of Things (IoT) is an emerging technology that allow smart devices to communicate through various heterogeneous channels (wired or wireless). However, for conventional networks, it has become a challenging task to efficiently control and manage the data flows of a huge number of devices. Software-defined networking (SDN) is a new way of thinking about networking. Because it is programmable, flexible, agile, and gives you a big picture of the network, it has tried to solve some IoT problems, like scalability, heterogeneity, and complexity. In large-scale SDN-IoT networks, there is a requirement for routing protocols that are both efficient and secure in order to ensure a superior level of quality of service (QoS) and quality of experience (QoE). To address the above stated challenges, a novel deep reinforcement learning (DRL) known as DQQS model is proposed. The aim is to achieve QoS and QoE while also ensuring the security of the SDN-IoT network. The proposed DQQS model dynamically extracts patterns from the past network history by interacting with the underlying network and generating optimized routing policies. This article employs three network metrics—throughput, latency, and the probability of avoiding malicious nodes—to measure the performance of DQQS. Simulations reveal that the proposed framework outperforms four state-of-the-art routing algorithms: OSPF, L-L Routing, Sailfish Routing, and RL-Routing in terms of both throughput and latency. For instance, in an attacked environment, the proposed DQQS model achieved the highest throughput value of 14.5 Mbps, surpassing OSPF at 8 Mbps, L-L at 8.2 Mbps, Sailfish at 9 Mbps, and RL at 9.5 Mbps. Similarly, this model exhibited superior performance in latency, recording the lowest latency value of 52 ms, compared to OSPF 88 ms, L-L 85 ms, Sailfish 72 ms, and RL 75 ms routing algorithms. The experimental results demonstrate that this new DQQS model is a pioneering deep reinforcement learning-based technique that optimally addresses secure routing in the SDN-IoT environment, ensuring enhanced quality of service and experience, and outperforming state-of-the art DL methodologies in both security and network performance metrics.

software-defined networkingInternet of Thingssecure routingdeep reinforcement learning
مقالمفتوح (مستودع)20224استشهاد· Semantic Scholar

Enhanced Route Discovery Mechanism Using Improved CH Selection Using Q-Learning to Minimize Delay

Scientific Programming · مجلد 2022 · 1-25

With the technological advancements, practical challenges of establishing long-distance communication should be addressed using hop-oriented routing networks. However, long-distance data transmissions usually deteriorate the quality of service (QoS) especially in terms of considerable communication delay. Therefore, in the presented work, a reward-based routing mechanism is proposed that aims at minimizing the overall delay which is evaluated under various scenarios. The routing process involved a refined CH selection mechanism based on a mathematical model until a threshold simulation is not attained. The illustrations for the coverage calculations of CH in the route discovery are also provided for possible routes between the source and the destination to deliver quality service. Based on this information, the data gathered from the past simulations is passed to the learning mechanism using the Q-learning model. The work is evaluated in terms of throughput, PDR, and first dead node in order to achieve minimal transmission delay. Furthermore, area variation is also involved to investigate the effect of an increase in the deployment area and number of nodes on a Q-learning-based mechanism aimed to minimize the delay. The comparative analysis against four existing studies justifies the success of the proposed mechanism in terms of throughput, first dead node, and delay analysis.

route discoverycluster head selectionQ-learningdelay reduction
مقالوصول مفتوح2021

Innovative and Development Migration between IPv4 and IPv6 Transition Mechanism as Professional Methods and Enhancing Packet Loosing

International Journal of Science and Research (IJSR) · مجلد 10 (6) · 154-161

IPv4 which is the old type of Internet Protocol has a new one named IP Next Generation (IPng) or IPv6 Development by Internet Engineering Task Force (IETF). This new version is developed specifically to fix some problem like space addressing. The lack of address space, Weak protocol extensibility, security issues and quality services. This paper will focus the reasons why used two versions together for a long time. Therefore, we have to investigate and analysis transition mechanisms that we can use during transition period to achieve a transition with minimum problem. Also defines the basic information about compatibility transition mechanisms between IPv4-IPv6. Dual Stack is one of the IPv4-IPv6 compatible mechanism by execution both IPv4 stack and IPv6 stack in a single station. Second methods 6 to 4 tunneling mechanism allow encrypt IPv6 packets in IPv4 packets to make communications possible. The IPv6 tunnel connection endpoints are terminated via a Virtual Tunnel Interface (VTI) configured in each device. This has been configured using GNS3 Simulator or/and Packet Tracer (Last update) Dual Stack & Tunneling mechanisms were completely implemented to select best one used in network. This research examines transmission latency, throughput and delay from end to end, through empirical observations of both Dual Stack and tunneling mechanisms. The main issues in my paper, how to reduce the packet loose, I suggest new professional method but the packet tracer has limitation, theriacal and logical be accepted, any way my proposal in my new method can solve the big issue in router that can dropped the packet.

IPv4 to IPv6 transitionIPv6dual stack6to4 tunneling
مقالوصول مفتوح20202استشهاد

Review of high-speed phase accumulator for direct digital frequency synthesizer

International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · مجلد 10 (4) · 4008-4008

A review of high-speed pipelined phase accumulator (PA) is proposed in this paper. The detail explanation of ideas, methods and techniques used in previous researches to improve the PA throughput designs were surveyed. The Brent–Kung (BK) adder was modified in this paper to be applied in pipelined PA architecture. A comparison of different adder circuits, includes a modified BK, ripple carry adder (RCA), Kogge-Stone adder (KS) and other prefix adders were applied to architect the PA based on Pipeline technique. The presented pipelined PA design circuit with multiple frequency control word (FCW) and different adders were coded Verilog hardware description language (HDL) code, compiled and verified with field programmable gate array (FPGA) kit platform. The comparison result shows that the modified BK adder has fast performances. The shifted clocking technique is utilized in the proposed pipelined PA circuit to reduce the unwanted repetitive D-flip flop (DFF) registers (coming from the pipeline technique), while preserving the high speed.

phase accumulatordirect digital synthesizerpipelined architectureBrent-Kung adder