جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

مقالوصول مغلق20259استشهاد· Semantic Scholar

A Novel Highly Sensitive Derivatization‐Free Spectrofluorimetric Approach for Analysis of the Antifungal Terconazole in Dosage Forms, Biological Fluids, and Environmental Water Samples: Assessment of Greenness and Blueness Profiles

Luminescence · مجلد 40 (9) · e70301-e70301

In the current study, the triazole antifungal terconazole (TRZ) was determined using a novel, extremely sensitive, and environmentally friendly spectrofluorimetric approach. A methanolic solution of TRZ exhibited strong native fluorescence at 373 nm when excited at 241 nm. With a correlation coefficient of 0.9999, a straight-lined calibration curve was produced over the concentration range of 5.0-600.0 ng/mL. With quantification and detection limits of 4.64 and 1.53 ng/mL, respectively, the developed approach showed ultrasensitivity reaching the nanogram scale. Due to its great sensitivity, the method could successfully estimate TRZ in human plasma samples with low %RSD values and high recoveries (98.31-101.66). The method was also effectively used to analyze the TRZ in its vaginal suppositories and creams without interference from existing excipients. With satisfactory results, the method's applicability was expanded to the analysis of TRZ in environmental water samples. Two distinct green metrics, AGSA and MoGAPI, were applied to validate the approach's greenness profile and eco-friendliness. The method's applicability and economic feasibility were also verified using the BAGI tool. According to ICHQ2 (R2) criteria, the proposed approach underwent complete validation. This work introduced the first spectrofluorimetric method for TRZ analysis, enabling its usage in pharmacological, biological, and environmental monitoring.

terconazoletriazole antifungalsnative fluorescencegreen analytical chemistry
مقالوصول مفتوح202433استشهاد· Semantic Scholar

Defects oriented hydrothermal synthesis of TiO2 and MnTiO2 nanoparticles as photocatalysts for wastewater treatment and antibacterial applications

Heliyon · مجلد 10 (3) · e25579-e25579

Pure and manganese-doped titanium dioxide nanoparticles (MnTiO 2 -NPs) were synthesized by the defect-oriented hydrothermal approach. The synthesized material was then characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), and UV–visible spectroscopy (UV–Vis). The agar well diffusion method assessed the antibacterial efficiency of TiO 2 and MnTiO 2 -NPs against E. coli and S. aureus . Zone of inhibition (ZOI) formed by pure TiO 2 was observed as 12 mm and 11.5 mm against E. coli and S. aureus , while for MnTiO 2 -NPs it was observed as 19 mm ( E. coli ) and 21 mm ( S. aureus ). The concentration of synthesized nanoparticles (10 mg/ml, and 20 mg/ml) was used for antibacterial studies. The efficacy of the pure and MnTiO 2 -NPs as an active photocatalyst for the degradation of methylene blue (MB) dye was also assessed using a UV light. It was observed that the photodegradation efficiency of 1 g of MnTiO 2 -NPs was higher than the same amount of pure TiO 2 . The results suggest that the photocatalyst concentration directly impacts the photodegradation of MB dye. The pH value was found to influence the photodegradation of MB dye at higher pH values. Based on the obtained results, MnTiO 2 -NPs were observed as a promising agent for microbial resistance and water remediation.

titanium dioxide nanoparticlesphotocatalysismethylene blue degradationantibacterial activity
مقالوصول مفتوح202339استشهاد· Semantic Scholar

Isotherm and kinetic studies for the adsorption of methylene blue onto a novel Mn3O4-Bi2O3 composite and their antifungal performance

Frontiers in Environmental Science · مجلد 11

Metal oxide-based adsorbents are quite in for wastewater treatment because of their selectivity, stable structure and very low solubility in aqueous systems. To explore the adsorption of methylene blue (MB), Mn 3 O 4 -Bi 2 O 3 adsorbents were made using a wet-impregnation technique with various concentrations of Mn 3 O 4 . The presence of Mn 3 O 4 contents on the surface of monoclinic Bi 2 O 3 was confirmed through representative scanning electron micrographs. The diffractions pertaining to cubic Mn 3 O 4 and monoclinic Bi 2 O 3 were noticed in the XRD pattern of 5% Mn 3 O 4 -Bi 2 O 3 which confirm the composite nature of the adsorbent. XPS analysis revealed the existance of Bi 4f, Bi 4d, Bi 4p, Bi4s, and Mn 2p core levels in Mn 3 O 4 -Bi 2 O 3 . The adsorption study divulged highest efficiency (∼95% and qe = ∼1.4 mgg -1 ) of 5% Mn 3 O 4 -Bi 2 O 3 composite among other contestants in removing 30 ppm MB at 28 ° C, pH 7 and 250 rpm. In addition to the determination of adsorption ability, the effect of preliminary dye concentration (5, 10, 20, and 30 ppm) and contact time (0.5–6 h) on the removal efficiency of prepared adsorbents were also monitored. The adsorption data from the batch experiments were evaluated using the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich-Kaganer (DRK) adsorption isotherms and pseudo 1 st and 2 nd -order kinetic models. The fitting of adsorption isotherms and kinetic models revealed the formation of adsorbate’s monolayer on the surface of adsorbents through the process of chemisorption. Through FTIR measurement, the MB adsorption onto the effective adsorbent (5% Mn 3 O 4 -Bi 2 O 3 ) was also confirmed. Moreover, TGA analysis showed ∼1.5% weight loss by 5% Mn 3 O 4 -Bi 2 O 3 before MB adsorption whereas ∼2.6% weight loss was noticed after dye adsorption onto the adsorbent. The antifungal activity was evaluated against the fungi A. solani and M. fructicola using the agar well diffusion technique. The 5% Mn 3 O 4 -Bi 2 O 3 composites have exceptional antifungal characteristics compared to Bi 2 O 3 and Mn 3 O 4 , with zone inhibition values of 58.6 and 53.9 mm, respectively.

methylene blue adsorptionmetal oxide adsorbentsdye removaladsorption isotherms
مقالوصول مفتوح202330استشهاد· Semantic Scholar

Photocatalytic Reduction of Cr(VI) to Cr(III) and Photocatalytic Degradation of Methylene Blue and Antifungal Activity of Ag/TiO2 Composites Synthesized via the Template Induced Route

Inorganics · مجلد 11 (3) · 133-133

Water treatment through photocatalysts has become an important topic regarding environmental protection. In the present study, silver and TiO2 (Ag/TiO2) composites for photocatalysts were effectively synthesized by adopting the template induced method. The prepared samples were characterized using XRD, FTIR spectroscopy, SEM, and EDX. The constructed samples’ particle size and shape were evaluated using a SEM, and the XRD patterns showed anatase crystalline phases. Their morphologies were controllable with changing concentration of reactants and calcination temperature. The synthesized composites act as catalyst in the degradation of methylene blue (MB) and reduction of Cr(VI) to Cr(III) under solar irradiation. In both of these activities, the best result has been shown by the 0.01 Ag/TiO2 composite. Methanol is used as the hole scavenger in the reduction of Cr(VI) to Cr(III). While the pH factor is important in the photocatalytic reduction of Cr(VI) to Cr(III). According to observations, S. macrospora and S. maydis were each subject to 0.01 Ag/TiO2 nanocomposites maximum antifungal activity, which was 38.4 mm and 34.3 mm, respectively. The outcomes demonstrate that both photocatalytic and antifungal properties are effectively displayed by the constructed material.

Ag/TiO2 compositephotocatalytic reductionhexavalent chromiummethylene blue degradation
مقالوصول مفتوح202326استشهاد· Semantic Scholar

Construction of Te-ZnO@S-g-C 3 N 4 Heterojunction Nanocomposites for the Efficient Removal of Methylene Blue, Antifungal Activity, and Adsorption of Cr(VI) Ion

Adsorption Science & Technology · مجلد 2023

Heterojunctions have proven to be effective catalysts for removing organic pollutants and heavy metals from wastewater. The following study is also about the formation of 2D heterojunction tellurium-doped zinc oxide composite with sulfur-doped graphitic carbon nitride (Te-ZnO@S-g-C 3 N 4 ) by adopting a low-cost, simple, and ecofriendly coprecipitation technique. Thiourea was calcined to prepare S-g-C 3 N 4 using the thermal degradation method. The characterization of synthesized photocatalysts was carried out by using SEM-EDX, FTIR, and XRD. The results obtained showed that the incorporation of tellurium caused an alteration in the wurtzite structure of ZnO. SEM-EDX analysis validated the purity of the synthesized samples due to the absence of any additional peaks. The decrease in the bandgap was also noted by the formation of composites. Using methylene blue as a reference dye, the UV-vis spectrophotometer was utilized to calculate the absorbance for photocatalytic degradation behavior. As a result of tellurium doping into the ZnO lattice, photocatalytic oxidation/reduction was improved, according to the results. 3Te-ZnO NPs showed the best degradation rate among dopant series, while an excellent overall degradation rate was noted by fabricated composite 3Te-ZnO@40S-g-C 3 N 4 . The best doped ZnO and composites were also used as sorbents for the abstraction of heavy metal (Cr(VI)) from water via adsorption. A definite rise in the removal efficiency percentage of chromium ions was observed by using these sorbents. The overall photo degradation rate and adsorption behavior noted were in ZnO<Te-ZnO<Te-ZnO@S-g-C 3 N 4 order. When compared to ZnO, Te-ZnO, SCN, and Te-ZnO@40SCN, the 3Te-ZnO@40SCN NCs have outstanding antifungal potential. The improved dispersibility and interaction of 3Te-ZnO@40SCN with membrane and intracellular proteins of fungi may be the cause of the greater effect of Te-ZnO@40SCN.

heterojunction nanocompositessulfur-doped graphitic carbon nitridephotocatalytic degradationmethylene blue
مقالمفتوح (مستودع)202318استشهاد· Semantic Scholar

Chemical activation and magnetization of onion waste derived carbon for arsenic removal

Arabian Journal of Chemistry · مجلد 16 (10) · 105118-105118

Arsenic is a known human carcinogen and its contamination of drinking water has been a global challenge. In this study, magnetic activated carbon (MAC) an efficient adsorbent material with adsorption capabilities of activated carbon and magnetic characteristics of magnetite was synthesized by hydrothermal method. Three adsorbent materials MCH, MCH3 and MCNa were synthesized using different activators like HNO3, H3PO4 and NaOH respectively. Structural and morphological features of the adsorbents before and after magnetization were determined by XRD, FTIR, FESEM, EDX and TGA. BJH nitrogen adsorption-desorption isotherm was used to find the surface area and pore size of adsorbents while the surface charge was determined by measuring zeta potential. FESEM images clearly showed the incorporation of magnetite nanoparticles into a porous network while XRD confirmed the formation of magnetite nanoparticles within the network of porous carbon with average crystallite sizes of 6.3, 5.8, 5.5 nm for MCH, MCH3 and MCNa respectively. To examine the adsorption behaviour of As(III) onto the MAC, batch adsorption experiments were conducted with the effect of different parameters like initial concentration, temperature, time, amount of adsorbent and pH. The results showed that MCNa is a potential adsorbent for As(III) with removal efficiency of 99 %. Overall adsorption process follows pseudo 2nd order kinetics while the Langmuir model was found well applicable to the experimental data. Thermodynamics of adsorption and desorption studies suggest that chemisorption is a predominant adsorption mechanism. Cost-effectiveness, novelty and magnetic recovery are the key features making onion-based MAC a potential adsorbent for the removal of As(III) from contaminated water.

arsenic removalAs(III) adsorptiononion wasteactivated carbon
مقالوصول مفتوح202314استشهاد· Semantic Scholar

Photocatalytic removal of imidacloprid containing frequently applied insecticide in agriculture industry using Co3O4 modified MoO3 composites

Frontiers in Chemistry · مجلد 11 · 1125835-1125835

Water pollution caused by the frequent utilization of pesticides in the agriculture industry is one of the major environmental concerns that require proper attention. In this context, the photocatalytic removal of pesticides from contaminated water in the presence of metallic oxide photocatalysts is quite in approach. In the present study, Orthorhombic MoO3 has been modified with varying amount of cobalt oxide through wet impregnation for the removal of imidacloprid and imidacloprid-containing commercially available insecticide. The solid-state absorption response and band gap evaluation of synthesized composites revealed a significant extension of absorption cross-section and absorption edge in the visible region of the light spectrum than pristine MoO3. The indirect band gap energy varied from ∼2.88 eV (MoO3) to ∼2.15 eV (10% Co3O4-MoO3). The role of Co3O4 in minimizing the photo-excitons’ recombination in MoO3 was studied using photoluminescence spectroscopy. The orthorhombic shape of MoO3 was confirmed through X-ray diffraction analysis and scanning electron microscopy. Moreover, the presence of distinct absorption edges and diffraction peaks corresponding to Co3O4 and MoO3 in absorption spectra and XRD patterns, respectively verified the composite nature of 10% Co3O4-MoO3. The photocatalytic study under natural sunlight irradiation showed higher photocatalytic removal (∼98%) of imidacloprid with relatively higher rate by 10% Co3O4-MoO3 composite among all contestants. Furthermore, the photocatalytic removal (∼93%) of commercially applied insecticide, i.e., Greeda was also explored.

imidaclopridphotocatalytic degradationcobalt oxidemolybdenum trioxide
مقالمفتوح (مستودع)202312استشهاد· Semantic Scholar

Design of a highly efficient heterostructure of transition metal tellurides with outstanding photocatalytic and antimicrobial potential

Journal of Saudi Chemical Society · مجلد 27 (6) · 101760-101760

This work aimed to synthesize an effective material having greater potential to reduce water pollution caused by industrial waste and exhibit efficient antibacterial potential. The transition metals (Manganese-Mn, Zinc-Zn) and post transition metal (Tin-Sn) reacted with TeO2 in a stoichiometric ratio by adopting a solid-state reaction. The crystallite size of the synthesized compounds MnTeO3 (D1), ZnTeO3 (D2), and SnTe3O8 (D3) was measured by the Debye-Scherrer formula by extracting data from the FWHM. D1 and D2 exhibit the orthorhombic structure whereas D3 has a simple cubic structure and crystalline size was measured by FWHM i.e., 221 nm, 458 nm, and 153 nm. Catalytic degradation efficiency for the removal of MB dye was found to be in the range of 66 %-73 %. Additionally, these substances have strong antimicrobial action alongside both bacteria and fungi, such as Escherichia coli, Staphylococcus aureus with maximal zone inhibitions of 35.0 mm and 12.5 mm for each kind of bacterium. The highest antifungal activity of Mn integrated was estimated to be 37.2 mm versus Staphylococcus aureus and 15.1 mm alongside Escherichia coli. According to the findings, the manufactured material has effective photocatalytic and antimicrobial activities.

transition metal telluridesheterostructuresphotocatalytic degradationmethylene blue
مقالوصول مفتوح202245استشهاد· Semantic Scholar

Investigating the Drinking Water Quality and Associated Health Risks in Metropolis Area of Pakistan

Frontiers in Materials · مجلد 9

Water is the basic need of human beings with no substitute for it. This research aims to investigate the drinking water quality and dissociated risk calculations of the metropolis area in Pakistan. The present study was based on public awareness toward water quality and the real situation of water quality of filtration plants in Islamabad. A questionnaire was designed with the help of existing literature about public awareness on water quality. In the present study, 450 completed questionnaires were collected and analyzed with the help of statistical tools. To investigate the real situation of water quality in the study area, 32 samples were analyzed from installed filtration plants. The results presented that electrical arsenic, conductivity (EC), and alkalinity were higher, and 26 samples were found to be unsafe for drinking under poor water quality (water quality index >100). The hazard index of arsenic was found to be <1 in adults (7.03E+01) and children (1.06E+02) in Islamabad. The microbiological situation was included as well for health risk assessment. There is a need of comprehensive management for the sustainability of filtration plants. Public satisfaction can be enhanced by dissemination of the significant importance of water quality in annual government reports to the public via local social media, print media, and television.

drinking water qualityhealth risk assessmenthazard indexarsenic
مقالوصول مغلق202237استشهاد· Semantic Scholar

Smart water management framework for irrigation in agriculture

Environmental Technology · مجلد 45 (12) · 2320-2334

Global demand and pressure on natural resources is increasing, which is greater on the availability of pure and safe drinking water. The use of new-age technologies including Smart sensors, embedded devices, and Cloud computing can help deliver efficient and safe management for provisioning drinking water for consumers and irrigation for agriculture. The management actions combined with real-time data gathering, monitoring, and alerting with proactive actions, prevent issues from occurring. This research presents a secure and smart research framework to enhance the existing irrigation system. This involves a low-budget irrigation model that can provide automated control and requirements as per the season, climate by using smart device sensors and Cloud communications. The authors presented four unique algorithms and water management processing rules. This also includes alerting scenarios for device and component failures and water leakage by automatically switching to alternative mode and sending alert messages about the faults to resolve the operational failures.The objective of this research is to identify new-age technologies for providing efficient and effective farming methods and investigate Smart IoT-based water management. The highlights of this research are to investigate IoT water management systems using algorithms for irrigation farming, for which this research presents a secure and smart research framework. This involves a low-budget irrigation model that provides automated control and requirements as per the season, climate by using smart device sensors and Cloud communications. Alerts for device and component failures and water leakage are also in-built for switching to alternative mode to resolve the operational failures.

smart irrigationagricultural water managementInternet of Thingssmart sensors