Electrochemical, surface and theoretical insights into the corrosion inhibition of mild steel in 0.5 M HCl by expired methotrexate: From waste drug to corrosion protector
Polyhedron · مجلد 297 · 118280-118280
Research outputs
مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.
24 مُخرَج نتائج البحث عن «Adsorption»
Polyhedron · مجلد 297 · 118280-118280
Applied Thermal Engineering · مجلد 281 · 128615-128615
International Journal of Biological Macromolecules · مجلد 315 (Pt 1) · 144182-144182
Pharmaceuticals · مجلد 18 (10) · 1495-1495
Background: Using natural substances for cancer therapy has attracted considerable interest due to their safety and reduced systemic toxicity. Nigella sativa (NS) oil, a traditional natural oil rich in bioactive compounds, possesses significant therapeutic potential. Brucine (BR), an alkaloid, exhibits potent cytotoxicity against various cancer cell lines; however, its poor selectivity and high systemic toxicity limit its clinical application. Objective: To overcome these challenges, this study aimed to enhance drug delivery and improve therapeutic efficacy. Method: A PEGylated nanoemulsion (NE) incorporating NS and BR was developed and characterized for particle size, size distribution, zeta potential, viscosity, and drug content. The in vitro release of BR was evaluated both with and without serum incubation. A quantitative amount of serum protein associated with the surface of the NE was estimated, and a hemolytic safety assay was carried out. Finally, an in vitro cytotoxicity study was conducted, and the in vivo anti-tumor effect of the developed PEGylated BR-loaded NE was evaluated and compared with its naked counterpart. Result: The developed PEGylated BR-loaded NE possessed favorable characteristics as a nanocarrier for parenteral administration, with a particle size of 188.5 nm, a zeta potential of −1.61, a viscosity of 3.4 cP, and 99% drug content uniformity. It released up to 60.4% of BR over 12 h, while only 18.4 µg/µmol of the total lipids were adsorbed on the surface of the formulation, compared with 54.5 µg/µmol for the naked counterpart. The PEGylated NE was safe, inducing less than 5% of hemolysis, and displayed substantial inhibition of MDA cell growth. Conclusions: The PEGylated NE achieved a significant reduction in tumor volume, suggesting that PEGylated NE may serve as a promising platform for enhancing anti-tumor activity.
Trends in Environmental Analytical Chemistry · مجلد 43 · e00236-e00236
Current Medicinal Chemistry · مجلد 32 (36) · 8035-8048
Cyclodextrin Metal-Organic Frameworks (CD MOFs) represent an innovative class of materials with remarkable properties and a broad range of applications. This review provides a comprehensive overview of the synthesis techniques, structural characterization, and diverse applications of CD-MOFs. By combining cyclodextrins (CDs) with metal-organic frameworks (MOFs), CD-MOFs are developed with enhanced functionality. The synthesis methods, including various metal sources, coordination modes, and post-synthesis modifications, are discussed alongside advanced structural characterization techniques like X-ray crystallography and spectroscopic methods. The unique characteristics of CD-MOFs, such as high specific surface area, tunable porosity, and customizable chemical structure, make them exceptional candidates for applications in gas adsorption, drug delivery, catalysis, sensing, and environmental remediation. Notably, CD-MOFs show significant promise as nanocarriers in drug delivery systems, offering improved therapeutic outcomes due to their efficient encapsulation and controlled release capabilities. The review highlights recent advancements and underscores the potential impact of CD-MOFs in driving future innovations across various scientific fields.
Engineering Analysis with Boundary Elements · مجلد 157 · 157-165
Engineering Analysis with Boundary Elements · مجلد 155 · 1035-1042
Frontiers in Environmental Science · مجلد 11
Metal oxide-based adsorbents are quite in for wastewater treatment because of their selectivity, stable structure and very low solubility in aqueous systems. To explore the adsorption of methylene blue (MB), Mn 3 O 4 -Bi 2 O 3 adsorbents were made using a wet-impregnation technique with various concentrations of Mn 3 O 4 . The presence of Mn 3 O 4 contents on the surface of monoclinic Bi 2 O 3 was confirmed through representative scanning electron micrographs. The diffractions pertaining to cubic Mn 3 O 4 and monoclinic Bi 2 O 3 were noticed in the XRD pattern of 5% Mn 3 O 4 -Bi 2 O 3 which confirm the composite nature of the adsorbent. XPS analysis revealed the existance of Bi 4f, Bi 4d, Bi 4p, Bi4s, and Mn 2p core levels in Mn 3 O 4 -Bi 2 O 3 . The adsorption study divulged highest efficiency (∼95% and qe = ∼1.4 mgg -1 ) of 5% Mn 3 O 4 -Bi 2 O 3 composite among other contestants in removing 30 ppm MB at 28 ° C, pH 7 and 250 rpm. In addition to the determination of adsorption ability, the effect of preliminary dye concentration (5, 10, 20, and 30 ppm) and contact time (0.5–6 h) on the removal efficiency of prepared adsorbents were also monitored. The adsorption data from the batch experiments were evaluated using the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich-Kaganer (DRK) adsorption isotherms and pseudo 1 st and 2 nd -order kinetic models. The fitting of adsorption isotherms and kinetic models revealed the formation of adsorbate’s monolayer on the surface of adsorbents through the process of chemisorption. Through FTIR measurement, the MB adsorption onto the effective adsorbent (5% Mn 3 O 4 -Bi 2 O 3 ) was also confirmed. Moreover, TGA analysis showed ∼1.5% weight loss by 5% Mn 3 O 4 -Bi 2 O 3 before MB adsorption whereas ∼2.6% weight loss was noticed after dye adsorption onto the adsorbent. The antifungal activity was evaluated against the fungi A. solani and M. fructicola using the agar well diffusion technique. The 5% Mn 3 O 4 -Bi 2 O 3 composites have exceptional antifungal characteristics compared to Bi 2 O 3 and Mn 3 O 4 , with zone inhibition values of 58.6 and 53.9 mm, respectively.
Adsorption Science & Technology · مجلد 2023
Heterojunctions have proven to be effective catalysts for removing organic pollutants and heavy metals from wastewater. The following study is also about the formation of 2D heterojunction tellurium-doped zinc oxide composite with sulfur-doped graphitic carbon nitride (Te-ZnO@S-g-C 3 N 4 ) by adopting a low-cost, simple, and ecofriendly coprecipitation technique. Thiourea was calcined to prepare S-g-C 3 N 4 using the thermal degradation method. The characterization of synthesized photocatalysts was carried out by using SEM-EDX, FTIR, and XRD. The results obtained showed that the incorporation of tellurium caused an alteration in the wurtzite structure of ZnO. SEM-EDX analysis validated the purity of the synthesized samples due to the absence of any additional peaks. The decrease in the bandgap was also noted by the formation of composites. Using methylene blue as a reference dye, the UV-vis spectrophotometer was utilized to calculate the absorbance for photocatalytic degradation behavior. As a result of tellurium doping into the ZnO lattice, photocatalytic oxidation/reduction was improved, according to the results. 3Te-ZnO NPs showed the best degradation rate among dopant series, while an excellent overall degradation rate was noted by fabricated composite 3Te-ZnO@40S-g-C 3 N 4 . The best doped ZnO and composites were also used as sorbents for the abstraction of heavy metal (Cr(VI)) from water via adsorption. A definite rise in the removal efficiency percentage of chromium ions was observed by using these sorbents. The overall photo degradation rate and adsorption behavior noted were in ZnO<Te-ZnO<Te-ZnO@S-g-C 3 N 4 order. When compared to ZnO, Te-ZnO, SCN, and Te-ZnO@40SCN, the 3Te-ZnO@40SCN NCs have outstanding antifungal potential. The improved dispersibility and interaction of 3Te-ZnO@40SCN with membrane and intracellular proteins of fungi may be the cause of the greater effect of Te-ZnO@40SCN.
Journal of Saudi Chemical Society · مجلد 27 (5) · 101716-101716
The wastewater released from industries contains many harmful materials like organic dyes and toxic metal ions which badly affect our environment. Nanotechnology is one of the unique approaches to reducing these chemicals. In current research work monometallic ZnO and Co-ZnO bimetallic NPs were synthesized from Brassica rapa leave’s extract and then these were employed for the elimination of methylene blue (MB) and metal ions of Cu (II). Characterization was done by several analytical techniques such as EDX, FTIR, UV-Visible spectroscopy, SEM and XRD. The average diameter of ZnO and Co-ZnO BMNPs was found to be 32.94 nm and 13.82 nm assessed by XRD analysis. The SEM investigation revealed that the produced NPs had a spherical shape. Three distinct methods have opted to determine the antioxidant potential of synthesized NPs. Different factors like pH, contact time, NPs conc., dye conc. and temperature were studied for the elimination of dye while for the eradication of Cu (II) ions; pH, contact time, NPs conc. and adsorbate doses were studied. Adsorption isotherm and kinetic studies were employed for MB and Cu (II) ions elimination while thermodynamic studies were also done for the elimination of MB.
Arabian Journal of Chemistry · مجلد 16 (10) · 105118-105118
Arsenic is a known human carcinogen and its contamination of drinking water has been a global challenge. In this study, magnetic activated carbon (MAC) an efficient adsorbent material with adsorption capabilities of activated carbon and magnetic characteristics of magnetite was synthesized by hydrothermal method. Three adsorbent materials MCH, MCH3 and MCNa were synthesized using different activators like HNO3, H3PO4 and NaOH respectively. Structural and morphological features of the adsorbents before and after magnetization were determined by XRD, FTIR, FESEM, EDX and TGA. BJH nitrogen adsorption-desorption isotherm was used to find the surface area and pore size of adsorbents while the surface charge was determined by measuring zeta potential. FESEM images clearly showed the incorporation of magnetite nanoparticles into a porous network while XRD confirmed the formation of magnetite nanoparticles within the network of porous carbon with average crystallite sizes of 6.3, 5.8, 5.5 nm for MCH, MCH3 and MCNa respectively. To examine the adsorption behaviour of As(III) onto the MAC, batch adsorption experiments were conducted with the effect of different parameters like initial concentration, temperature, time, amount of adsorbent and pH. The results showed that MCNa is a potential adsorbent for As(III) with removal efficiency of 99 %. Overall adsorption process follows pseudo 2nd order kinetics while the Langmuir model was found well applicable to the experimental data. Thermodynamics of adsorption and desorption studies suggest that chemisorption is a predominant adsorption mechanism. Cost-effectiveness, novelty and magnetic recovery are the key features making onion-based MAC a potential adsorbent for the removal of As(III) from contaminated water.
Journal of Materials Science Materials in Electronics · مجلد 34 (21)
Inorganic Chemistry Communications · مجلد 140 · 109449-109449
Nanomaterials · مجلد 12 (6) · 1028-1028
The versatility of striped borophene (sB), β12 borophene (β12), and pristine graphene (GN) to adsorb π-systems was comparatively assessed using benzene (BNZ) and hexafluorobenzene (HFB) as electron-rich and electron-deficient aromatic π-systems, respectively. Using the density functional theory (DFT) method, the adsorption process of the π-systems on the investigated 2D sheets in the parallel configuration was observed to have proceeded more favorably than those in the vertical configuration. According to the observations of the Bader charge transfer analysis, the π-system∙∙∙sB complexes were generally recorded with the largest contributions of charge transfer, followed by the π-system∙∙∙β12 and ∙∙∙GN complexes. The band structures of the pure sheets signaled the metallic and semiconductor characters of the sB/β12 and GN surfaces, respectively. In the parallel configuration, the adsorption of both BNZ and HFB showed more valence and conduction bands compared to the adsorption in the vertical configuration, revealing the prominent preferentiality of the anterior configuration. The density-of-states (DOSs) results also affirmed that the adsorption process of the BNZ and HFB on the surface of the investigated 2D sheets increased their electrical properties. In all instances, the sB and β12 surfaces demonstrated higher adsorptivity towards the BNZ and HFB than the GN analog. The findings of this work could make a significant contribution to the deep understanding of the adsorption behavior of aromatic π-systems toward 2D nanomaterials, leading, in turn, to their development of a wide range of applications.