جامعة المعرفة
المصدر المعتمد للمعلومات البحثية والمخرجات هو قاعدة بيانات سكوبس (Elsevier Scopus) مع تدقيق بيانات الباحثين من عمادة البحث العلمي.

Research outputs

المخرجات البحثية

مقالات ومراجعات وأوراق مؤتمرات وفصول كتب، مفهرسة برقم DOI ومربوطة بباحثي الجامعة.

3 مُخرَج نتائج البحث عن «Radio frequency»

مقالوصول مغلق20253استشهاد· Semantic Scholar

Ultracompact RF Rectifier Circuit for Implantable Devices

IEEE Journal of Radio Frequency Identification · مجلد 10 · 11-19

This study proposes an innovative design approach for an ultra-compact RF rectifier, emphasizing high power conversion efficiency (PCE). The rectifier design employs a dual-branch cell configuration, labeled as Section-1 (S1) and Section-2 (S2), to enhance its performance characteristics. To support biomedical implant applications, these branches are incorporated with a meandered line network, designated as (ML1 and ML2). A radial stub is employed in the S1 structure, while series inductors are additionally connected to S1 and S2 to achieve improved performance characteristics. To improve power delivery performance, the proposed rectifier is specifically optimized for enhanced transfer efficiency within the frequency range of 1.28 GHz to 1.52 GHz. This makes it highly suitable for integration into wireless power transfer systems (WPTs) designed for biomedical implants. Both the simulated (experimental) results confirmed a maximum RF-to-DC PCE of 78.80% (77.7%), achieved at an input powerPinlevel of 4 dBm. Moreover, the proposed design achieves an RF-to-DC conversion efficiency greater than 25% atPinlevel of -20 dBm, thereby demonstrating its suitability for efficient operation under low-power conditions. The rectifier is fabricated on an RT/Duroid substrate, resulting in a compact footprint measuring 7.8 mm by 9.3 mm. A single-series diode (SSrd) configuration is employed to achieve the desired rectification performance. To ensure a wide impedance bandwidth, a sequential matching technique is applied, effectively optimizing the device’s performance throughout the specified frequency spectrum. This work demonstrates the effectiveness of the proposed rectifier in enabling WPT for biomedical implant applications, with particular emphasis on scenarios that demand efficient harvesting of ambient energy.

RF rectifierbiomedical implantswireless power transferpower conversion efficiency
مقالوصول مفتوح202414استشهاد· Semantic Scholar

RETRACTED ARTICLE: Intelligent dynamic spectrum access using fuzzy logic in cognitive radio networks

Discover Applied Sciences · مجلد 6 (1)

Abstract Cognitive radio networks have emerged as a promising solution to the growing problem of spectrum scarcity and inefficient spectrum utilization. By enabling secondary users to opportunistically access underutilized frequency bands while avoiding harmful interference to primary users, cognitive radio networks offer the potential for more efficient and dynamic spectrum allocation. In this paper, we propose an intelligent approach to dynamic spectrum access using fuzzy logic in cognitive radio networks. The key challenge in cognitive radio networks lies in spectrum sensing, decision-making, and channel selection, where uncertainties and variations in the radio frequency spectrum are prevalent. To address these challenges, we employ fuzzy logic as a powerful tool to handle the inherent imprecision and ambiguity in the decision-making process. Fuzzy-based spectrum sensing algorithms allow for robust detection of spectrum opportunities by considering the “fuzziness” in the received signal strength and noise conditions.

cognitive radio networksdynamic spectrum accessfuzzy logicspectrum sensing
مقالوصول مفتوح202314استشهاد· Semantic Scholar

A multiband SSr diode RF rectifier with an improved frequency ratio for biomedical wireless applications

Scientific Reports · مجلد 13 (1) · 13246-13246

This paper described a four-band implantable RF rectifier with simplified circuit complexity. Each RF-rectifier cell is sequentially matched to the four operational frequencies to accomplish the proposed design. The proposed RF rectifier can harvest RF signals at 1.830, 2.100, and white space Wi-Fi bands between 2.38 to 2.68 GHz, respectively. At 2.100 GHz, the proposed RF harvester achieved a maximum (radio frequency direct current) RF-to-DC power conversion efficiency (PCE) of 73.00% and an output DC voltage [Formula: see text] of 1.61 V for an RF power of 2 dBm. The outdoor performance of the rectenna shows a [Formula: see text] of 0.440 V and drives a low-power bq25504-674 evaluation module (EVM) at 1.362 V. The dimension of the RF-rectifier on the FR-4 PCB board is 0.27[Formula: see text] [Formula: see text] 0.29[Formula: see text]. The RF-rectifier demonstrates the capacity to effectively utilize the frequency domain by employing multi-band operation and exhibiting a good impedance bandwidth through a sequential matching technique. Thus, by effectively controlling the rectenna's ambient performance, the proposed design holds the potential for powering a range of low-power biomedical implantable devices. (BIDs).

RF rectifierrectennamultiband operationbiomedical implants